Waste management: bio-fuel recovery from palm oil mill effluent (POME)
The main objective of this study is to produce biofuel (namely biodiesel) from palm oil mill effluent (POME), which is the main waste generated from the oil palm industry. POME is generated from the production of oil palm, in which every two tonne of fresh fruit bunch (FFB) of palm fruit can prod...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2013
|
| 主題: | |
| 在線閱讀: | http://ir.unimas.my/id/eprint/8774/2/Ivy%20Moh.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | The main objective of this study is to produce biofuel (namely biodiesel) from palm oil mill
effluent (POME), which is the main waste generated from the oil palm industry. POME is
generated from the production of oil palm, in which every two tonne of fresh fruit bunch
(FFB) of palm fruit can produce one tonne of PO ME Due to large amount of PO ME is being
produced daily, the discharge of treated POME is being produced daily, the discharge of
treated POME to receiving water bodies definitely cause serious pollution to the received
water bodies. Indeed, literatures show that the oil content in POME can be converted to
biodiesel. Therefore, in this research, the biodiesel will be produced from POME through
simplified-step transesterification of POME using methoxide solution In order to give a
simple, low cost and can be carried out in short durations method to recover the useful
components in POME. Pre-treatment of POME was carried out before transesterification
process to remove the unwanted solids. After transesterification, the biodiesel produced was
purified using water to remove the unwanted chemicals and also dry with drying agent. FTIR
analysis was used to confirm the products are biodiesel. Biodiesel that was produced by using
2.5% (wit) sodium methoxide from desolidification POME had better quality. |
|---|