Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques
Simulation and control of saltwater intrusion based on hydrodynamic dispersion has been investigated through numerical and physical modeling techniques. In the mathematical formulation, two equations were derived one for water flow and the other for solute transport that were coupled through Darc...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English English |
Published: |
1997
|
Subjects: | |
Online Access: | http://psasir.upm.edu.my/id/eprint/10089/1/FK_1997_16_A.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my-upm-ir.10089 |
---|---|
record_format |
uketd_dc |
spelling |
my-upm-ir.100892011-03-09T02:28:54Z Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques 1997-05 Ganfoud, Ahmed Abulaid Simulation and control of saltwater intrusion based on hydrodynamic dispersion has been investigated through numerical and physical modeling techniques. In the mathematical formulation, two equations were derived one for water flow and the other for solute transport that were coupled through Darcy's velocity and concentration. In the numerical model formulation, Galerkin finite element approach was applied for deriving the element matrix equation through quadrilateral elements. To save memory and computation time, a pointer matrix was used to avoid storage of most of the zeros in the resulting sparse matrix. The developed model was an efficient and a rather general one such that the aquifer can be of any types with different boundary conditions and unlimited number of sources and sinks. For model verification, Henry's problem was used to compare the model results with previous studies that applied constant and velocity-dependent dispersion coefficient. The comparison showed a good agreement between the proposed model and the previous ones. Also, for simulation of saltwater intrusion the computed isochlor contours for the physical model were in good agreement with the experimental ones By using the sandbox model and other apparatuses, the average values of porosity, hydraulic conductivity, dispersion coefficient, and saltwater density were found to be 0.36, 0.0855 cm/s, 14.34, 10-2 cm2/s, and 1027. 5 kglm3 respectively. These parameters were used in the numerical simulation. Saltwater intrusion was simulated experimentally using the physical model under steady and unsteady state conditions through the measurement of the sodium chloride distribution in the aquifer. According to physical simulation, the intruded length was changed from 48 cm at steady state to 79 cm at the end of 90 minutes from the steady state during which the freshwater head was changed every 30 minutes by 0.5 cm from 50 cm to 48.5 cm. Saltwater encroachment - Case studies 1997-05 Thesis http://psasir.upm.edu.my/id/eprint/10089/ http://psasir.upm.edu.my/id/eprint/10089/1/FK_1997_16_A.pdf application/pdf en public phd doctoral Universiti Putra Malaysia Saltwater encroachment - Case studies Faculty of Engineering English |
institution |
Universiti Putra Malaysia |
collection |
PSAS Institutional Repository |
language |
English English |
topic |
Saltwater encroachment - Case studies |
spellingShingle |
Saltwater encroachment - Case studies Ganfoud, Ahmed Abulaid Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques |
description |
Simulation and control of saltwater intrusion based on hydrodynamic dispersion
has been investigated through numerical and physical modeling techniques. In the
mathematical formulation, two equations were derived one for water flow and the other
for solute transport that were coupled through Darcy's velocity and concentration. In the
numerical model formulation, Galerkin finite element approach was applied for deriving
the element matrix equation through quadrilateral elements. To save memory and
computation time, a pointer matrix was used to avoid storage of most of the zeros in the
resulting sparse matrix. The developed model was an efficient and a rather general one
such that the aquifer can be of any types with different boundary conditions and
unlimited number of sources and sinks. For model verification, Henry's problem was
used to compare the model results with previous studies that applied constant and
velocity-dependent dispersion coefficient. The comparison showed a good agreement between the proposed model and the previous ones. Also, for simulation of saltwater
intrusion the computed isochlor contours for the physical model were in good
agreement with the experimental ones
By using the sandbox model and other apparatuses, the average values of
porosity, hydraulic conductivity, dispersion coefficient, and saltwater density were
found to be 0.36, 0.0855 cm/s, 14.34, 10-2 cm2/s, and 1027. 5 kglm3 respectively. These
parameters were used in the numerical simulation. Saltwater intrusion was simulated
experimentally using the physical model under steady and unsteady state conditions
through the measurement of the sodium chloride distribution in the aquifer. According
to physical simulation, the intruded length was changed from 48 cm at steady state to
79 cm at the end of 90 minutes from the steady state during which the freshwater head
was changed every 30 minutes by 0.5 cm from 50 cm to 48.5 cm. |
format |
Thesis |
qualification_name |
Doctor of Philosophy (PhD.) |
qualification_level |
Doctorate |
author |
Ganfoud, Ahmed Abulaid |
author_facet |
Ganfoud, Ahmed Abulaid |
author_sort |
Ganfoud, Ahmed Abulaid |
title |
Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques |
title_short |
Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques |
title_full |
Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques |
title_fullStr |
Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques |
title_full_unstemmed |
Simulation and Control of Saltwater Intrusion Through Numerical and Physical Modeling Techniques |
title_sort |
simulation and control of saltwater intrusion through numerical and physical modeling techniques |
granting_institution |
Universiti Putra Malaysia |
granting_department |
Faculty of Engineering |
publishDate |
1997 |
url |
http://psasir.upm.edu.my/id/eprint/10089/1/FK_1997_16_A.pdf |
_version_ |
1747811045609570304 |