The Wear Pattern of Router Cutter Material Between High Speed Steel and Solid Tungsten Carbide in Cutting Rubberwood Medium Density Fiberboard

In order to study the wear pattern of router cutter material between High speed steel and Solid tungsten carbide in cutting rubberwood MDF two type of router cutter material (HSS and STC) were employed. The solid tungsten carbide showed the longest working life (twice the cutting distance compare...

全面介绍

Saved in:
书目详细资料
主要作者: Bakeri, Ahmad Bahtiar
格式: Thesis
语言:English
English
出版: 2002
主题:
在线阅读:http://psasir.upm.edu.my/id/eprint/10123/1/FH_2003_2.pdf
标签: 添加标签
没有标签, 成为第一个标记此记录!
实物特征
总结:In order to study the wear pattern of router cutter material between High speed steel and Solid tungsten carbide in cutting rubberwood MDF two type of router cutter material (HSS and STC) were employed. The solid tungsten carbide showed the longest working life (twice the cutting distance compare to high speed steel), while the high speed steel retained its usefulness for only a short distance of cutting (tool life). It was confirmed that the steel wore faster than tungsten. The observation show that solid tungsten carbide is more suitable because it wear only a few micron compared to high speed steel in cutting rubberwood MDF but high speed steel can be sharpened to improve it's performance but at an extra cost and time. It is more economic and productive. Solid tungsten carbide is the better alternative as there are many constrained.