Properties and Utilisation of Tropical Bamboo (Gigantochloa Scortechinii), for Structural Plywood
The objectives of these study were to determine the physical and mechanical properties of 4-year-old Gigantochloa scortechinii culms and to evaluate the properties of plywood manufactured from the bamboo culms. Bamboo culms were split using hand splitter to produce splits. Strips were prepared by...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English English |
| 出版: |
2003
|
| 主题: | |
| 在线阅读: | http://psasir.upm.edu.my/id/eprint/10144/1/FH_2003_11.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | The objectives of these study were to determine the physical and mechanical properties
of 4-year-old Gigantochloa scortechinii culms and to evaluate the properties of plywood
manufactured from the bamboo culms. Bamboo culms were split using hand splitter to
produce splits. Strips were prepared by removing the epidermis and the inner skin using
knife, whereas outer splits were prepared by removing the inner skin of the culm. For the
bamboo plywood production, the bamboo strips were glued edge-to-edge using polyvinyl
acetate resin into a 410 mm x 410 mm x 4 mm sized laminate. The laminates were then
bonded perpendicularly to each other using phenol formaldehyde resin to produce tbreeply
bamboo plywood. The assembly time was set at 30 min and bamboo plywood was
consolidated by hot pressing at 140°C and pressure of 14 kg'cm2 for 6.5 minutes.
Commercial structural plywood (Grade A) Merawan species with the same thickness as
the bamboo plywood (12 mm) was used for comparison purposes.
The results of the physical studies indicate that within the culm wall, the moisture content
decreased from the interior towards the peripheral layer of the culm while the specific
gravity increased. The moisture content decreased with height, whilst specific gravity
increased. In the strip form, bamboo shrank: more in both radial and tangential directions
than in the longitudinal direction. Between radial and tangential, shrinkage occurs more
in radial than in tangential. The mean value of modulus of rupture (MOR) for the bamboo
strips (179.6 N/mm2) showed no significant difference with splits (periphery layer
oriented upward, 158.3 N/mm2) but a significant difference was observed when
compared with the periphery layer oriented downwards (134.2 N/mm2). |
|---|