Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes

The present work on the simulation of cold-working process using finite element analysis was devoted to two parts. The first part concerns with axisymmetric finite element analysis of elastic-plastic 2024-T351 aluminium alloy. The material was considered isotropic and a Von Mises yield stress criter...

Full description

Saved in:

Bibliographic Details
Main Author:	Ab. Rashdi, Abdalla A.
Format:	Thesis
Language:	English English
Published:	2000
Subjects:	Finite element method Fasteners
Online Access:	http://psasir.upm.edu.my/id/eprint/10502/1/FK_2000_33_A.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.10502
record_format	uketd_dc
spelling	my-upm-ir.105022014-10-28T01:15:22Z Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes 2000-06 Ab. Rashdi, Abdalla A. The present work on the simulation of cold-working process using finite element analysis was devoted to two parts. The first part concerns with axisymmetric finite element analysis of elastic-plastic 2024-T351 aluminium alloy. The material was considered isotropic and a Von Mises yield stress criterion with hardening rule was assumed. The commercial finite element software, LUSAS-13.1, was used to simulate the cold-working process in a 6 mm thick plate with a 6.35 mm diameter hole with 4% radial expansion for three different models. The second part deals with the effect of support position along the exit face on the residual stress distribution around the hole. Finite element analysis of eight axisymmetric models with different support positions was considered. The finite element results for first part of the analysis showed that the radial residual stresses were of a compressive nature, except for a thin layer on the entrance face of the specimen. Models 1 and 2 gave a lesser spread of compressive tangential residual stresses data than that obtained from model 3. The tangential residual stresses at the entrance face were tensile in nature while beyond 1 mm from the top surface through the rest of the thickness and along the edge of the hole they were compressive in nature. The results were compared with previous results in the literature and good agreement was obtained. The analysis of the second part showed that the distribution of the tangential residual stresses at the exit face suggest the superiority of the support conditions 7 and 8 compared to support conditions 1 to 6. The magnitude of the spurt in value of the residual stresses varied with support condition and finally reduced to zero for support condition starting from 15 to 20 mm from the edge of the hole. Finite element method Fasteners 2000-06 Thesis http://psasir.upm.edu.my/id/eprint/10502/ http://psasir.upm.edu.my/id/eprint/10502/1/FK_2000_33_A.pdf application/pdf en public masters Universiti Putra Malaysia Finite element method Fasteners Faculty of Engineering English
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English English
topic	Finite element method Fasteners
spellingShingle	Finite element method Fasteners Ab. Rashdi, Abdalla A. Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes
description	The present work on the simulation of cold-working process using finite element analysis was devoted to two parts. The first part concerns with axisymmetric finite element analysis of elastic-plastic 2024-T351 aluminium alloy. The material was considered isotropic and a Von Mises yield stress criterion with hardening rule was assumed. The commercial finite element software, LUSAS-13.1, was used to simulate the cold-working process in a 6 mm thick plate with a 6.35 mm diameter hole with 4% radial expansion for three different models. The second part deals with the effect of support position along the exit face on the residual stress distribution around the hole. Finite element analysis of eight axisymmetric models with different support positions was considered. The finite element results for first part of the analysis showed that the radial residual stresses were of a compressive nature, except for a thin layer on the entrance face of the specimen. Models 1 and 2 gave a lesser spread of compressive tangential residual stresses data than that obtained from model 3. The tangential residual stresses at the entrance face were tensile in nature while beyond 1 mm from the top surface through the rest of the thickness and along the edge of the hole they were compressive in nature. The results were compared with previous results in the literature and good agreement was obtained. The analysis of the second part showed that the distribution of the tangential residual stresses at the exit face suggest the superiority of the support conditions 7 and 8 compared to support conditions 1 to 6. The magnitude of the spurt in value of the residual stresses varied with support condition and finally reduced to zero for support condition starting from 15 to 20 mm from the edge of the hole.
format	Thesis
qualification_level	Master's degree
author	Ab. Rashdi, Abdalla A.
author_facet	Ab. Rashdi, Abdalla A.
author_sort	Ab. Rashdi, Abdalla A.
title	Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes
title_short	Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes
title_full	Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes
title_fullStr	Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes
title_full_unstemmed	Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes
title_sort	finite element evaluation of elasto-plastic residual stresses around coldworked fastener holes
granting_institution	Universiti Putra Malaysia
granting_department	Faculty of Engineering
publishDate	2000
url	http://psasir.upm.edu.my/id/eprint/10502/1/FK_2000_33_A.pdf
_version_	1747811136558858240

Finite Element Evaluation of Elasto-Plastic Residual Stresses around Coldworked Fastener Holes

Similar Items