Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq

Summer heat can be so severe in Iraq and the ambient temperature could reach higher than 50 °C. Most of the outside surfaces, generally and roofs, specifically are affected by solar radiation beams, which would increase the usage of cooling devices and power consumption in houses. These increases...

Full description

Saved in:

Bibliographic Details
Main Author:	Saleh, Al-Mohsen Mustafa Abdulmunem
Format:	Thesis
Language:	English
Published:	2022
Subjects:	Rooftop architecture Roofs - Design and construction
Online Access:	http://psasir.upm.edu.my/id/eprint/105465/1/AL-MOHSEN%20MUSTAFA%20ABDULMUNEM%20-%20UPMIR.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.105465
record_format	uketd_dc
spelling	my-upm-ir.1054652024-02-01T01:56:47Z Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq 2022-05 Saleh, Al-Mohsen Mustafa Abdulmunem Summer heat can be so severe in Iraq and the ambient temperature could reach higher than 50 °C. Most of the outside surfaces, generally and roofs, specifically are affected by solar radiation beams, which would increase the usage of cooling devices and power consumption in houses. These increases have caused severe electricity shortage during the summer, in addition to the general electricity issues in Iraq. Thus, this study aimed to assess the heat flux through traditional roofs in Iraqi dwellings. The efficiency of these types of roofs in decreasing the amount of heat flux flowing through them was assessed as a second objective. This study has also examined the impact of the double-skin roof strategy (through retrofitting these roofs with a K-span roof cover) on the reduction of the total heat flux and on improving the efficiency of the whole roof as a final objective. The methodology of this study included running simulations using the Comsol Multiphysics software. Simulations were conducted for 72 hours in the summer on the 27th, 28th, and 29th of July, and results were taken within 24-hour intervals for the following parameters: exterior roof surface temperature (Tes); interior roof surface temperature (Tis); indoor room temperature (Tr); total heat flux (Q-value); and roof heat transfer coefficient (U-value). The efficiency results of roof types (RF) before being retrofitted with K-span roof cover showed that the RF3B roof was the only efficient roof with U-value that was better than the Middle East standards by 32.6%. RF3 and RF4 multi-layered roof types showed lower efficiency than the standards by 46.4% and 278%, while RF5 and RF4B single layer roofs were 733% and 603% lower than the standards, respectively. The results of retrofitting the roofs with K-span roof cover demonstrated that the average efficiency of the parameters of Tes, Tis, Tr, Q-value, and U-value that impacted the efficiency of the selected roofs were improved by 54.2% in RF3 (Room 3), 56.9% in RF3B (Room 3B), and 55.1% in RF4 (Room 4). Meanwhile, RF4B (Room 4B) and RF5 (Room 5) showed 25.8% and 30% improvement, respectively. Finally, it is important to mention that the average improvement by K-span roof cover in this study was 44%, and this value could be higher if the roof cover was treated using another insulation strategy. Rooftop architecture Roofs - Design and construction 2022-05 Thesis http://psasir.upm.edu.my/id/eprint/105465/ http://psasir.upm.edu.my/id/eprint/105465/1/AL-MOHSEN%20MUSTAFA%20ABDULMUNEM%20-%20UPMIR.pdf text en public masters Universiti Putra Malaysia Rooftop architecture Roofs - Design and construction Ismail, Sumarni
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English
advisor	Ismail, Sumarni
topic	Rooftop architecture Roofs - Design and construction
spellingShingle	Rooftop architecture Roofs - Design and construction Saleh, Al-Mohsen Mustafa Abdulmunem Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq
description	Summer heat can be so severe in Iraq and the ambient temperature could reach higher than 50 °C. Most of the outside surfaces, generally and roofs, specifically are affected by solar radiation beams, which would increase the usage of cooling devices and power consumption in houses. These increases have caused severe electricity shortage during the summer, in addition to the general electricity issues in Iraq. Thus, this study aimed to assess the heat flux through traditional roofs in Iraqi dwellings. The efficiency of these types of roofs in decreasing the amount of heat flux flowing through them was assessed as a second objective. This study has also examined the impact of the double-skin roof strategy (through retrofitting these roofs with a K-span roof cover) on the reduction of the total heat flux and on improving the efficiency of the whole roof as a final objective. The methodology of this study included running simulations using the Comsol Multiphysics software. Simulations were conducted for 72 hours in the summer on the 27th, 28th, and 29th of July, and results were taken within 24-hour intervals for the following parameters: exterior roof surface temperature (Tes); interior roof surface temperature (Tis); indoor room temperature (Tr); total heat flux (Q-value); and roof heat transfer coefficient (U-value). The efficiency results of roof types (RF) before being retrofitted with K-span roof cover showed that the RF3B roof was the only efficient roof with U-value that was better than the Middle East standards by 32.6%. RF3 and RF4 multi-layered roof types showed lower efficiency than the standards by 46.4% and 278%, while RF5 and RF4B single layer roofs were 733% and 603% lower than the standards, respectively. The results of retrofitting the roofs with K-span roof cover demonstrated that the average efficiency of the parameters of Tes, Tis, Tr, Q-value, and U-value that impacted the efficiency of the selected roofs were improved by 54.2% in RF3 (Room 3), 56.9% in RF3B (Room 3B), and 55.1% in RF4 (Room 4). Meanwhile, RF4B (Room 4B) and RF5 (Room 5) showed 25.8% and 30% improvement, respectively. Finally, it is important to mention that the average improvement by K-span roof cover in this study was 44%, and this value could be higher if the roof cover was treated using another insulation strategy.
format	Thesis
qualification_level	Master's degree
author	Saleh, Al-Mohsen Mustafa Abdulmunem
author_facet	Saleh, Al-Mohsen Mustafa Abdulmunem
author_sort	Saleh, Al-Mohsen Mustafa Abdulmunem
title	Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq
title_short	Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq
title_full	Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq
title_fullStr	Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq
title_full_unstemmed	Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq
title_sort	roof efficiency assessment for indoor thermal environment in contemporary houses in najaf city, iraq
granting_institution	Universiti Putra Malaysia
publishDate	2022
url	http://psasir.upm.edu.my/id/eprint/105465/1/AL-MOHSEN%20MUSTAFA%20ABDULMUNEM%20-%20UPMIR.pdf
_version_	1794018893372588032

Roof efficiency assessment for indoor thermal environment in contemporary houses in Najaf City, Iraq

Similar Items