Development of Semi Automatic H-Ometer Equipment
Semi Automatic H-Ometer (SAHO) equipment was developed to enhance H-Ometer testing. The SAHO was developed using a total design concept, which involved proposed design and specifications, conceptual design, detailed design, and fabrication and testing. The conceptual design was the most critical...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English |
| 出版: |
2002
|
| 主題: | |
| 在線閱讀: | http://psasir.upm.edu.my/id/eprint/11081/1/FK_2002_22.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Semi Automatic H-Ometer (SAHO) equipment was developed to
enhance H-Ometer testing. The SAHO was developed using a total design
concept, which involved proposed design and specifications, conceptual design,
detailed design, and fabrication and testing. The conceptual design was the most
critical stage in the design process and two methods were used in the design of
SAHO. The methods were the Product Design Specification (PDS) and
Morphological Chart (MC). Based on these methods, eight possible concepts were
generated. The Pugh selection method was used for the final selection of possible
concepts and a combination of concepts 5 and 7 was chosen. Based on selected
concepts, SAHO consists of seven major parts which are casing, vertical mover,
sliding unit, stand, control unit, Automatic Probe Changer (APC) and sample
stand. The major parts were modeled using AutoCAD software while the analysis
of the critical parts were undertaken with Finite Element Analysis (FEA). The
SAHO is likely to enhance H-Ometer testing as it will have the capability to test a
variety of sample materials. |
|---|