Three level code division multiplexing in radio over fiber system
Recently, broadband internet users and the demands for communications with high data rates and wide coverage networks have grown exponentially all over the world. Radio over fiber (RoF) system has been introduced to compete with the demands. It is basically a combination of radio waves and optica...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English |
| Published: |
2022
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/112148/1/FK%202022%20127%20-%20IR.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Recently, broadband internet users and the demands for communications with
high data rates and wide coverage networks have grown exponentially all over
the world. Radio over fiber (RoF) system has been introduced to compete with
the demands. It is basically a combination of radio waves and optical fiber links
that facilitates wireless access in a range of applications such as Wi-Fi (IEEE
802.11), which is one of the Wireless Local Area Network (WLAN) standards.
RoF technology can provide a solution for Wi-Fi that is suffering from relatively
low data rates and high loss as the main advantages of this technology are large
bandwidth, low attenuation losses, and low power consumption. Despite the
benefits of this technology, it is suffering from low quality of signals due to the
noise and limited number of users, as each user must be assigned a special
carrier frequency. The signal impairments in RoF system, such as noise and
distortion, tend to limit the dynamic range of RoF links. Therefore, Three Level
Division Multiplexing (3LCDM) technique is chosen to be implemented over RoF
system since it is one of the best multiplexing techniques that allows two users
to share the same channel which double the capacity. Code division in the
3LCDM technique is achieved by compiling two data streams within the multiple
levels instead of the wavelength bandwidth, and this doubles the bandwidth
efficiency. In this study, the 3LCDM over RoF system is proposed in WLAN
IEEE802.11 (Wi-Fi) to enhance the performance in terms of number of users and
receiver sensitivity. OptiSystem software in cooperation with MATLAB was used
for the simulation, which is only for the downlink transmission. In this study, the
performance of the 3LCDM over RoF system was investigated with 2.4 GHz, 5
GHz, and the combination of 2.4 GHz and 5 GHz carrier frequencies. The results
show that the system with the combination of 2.4 GHz and 5 GHz carrier
frequencies can support 4 users at a maximum data rate of 2x 0.5 Gbps and 43
km fiber length without any amplifier. It was also found that the power penalty for
this particular proposed model over the maximum distance was 0.8 dB for the
best user and less than 3 dB for the worst user. The system also displayed better
performance than the conventional RoF by around 8.65 dB. In this study, the performance of the combination of 3LCDM over RoF over WDM for 8 users was
also evaluated. By using the post-Dispersion Compensation Fiber (DCF), it was
observed that the system at 2 x 0.5 Gbps for each carrier can achieve maximum
distance of 57 km without using amplifiers. In addition, the performance of the
worst user in 3LCDM-RoF-WDM system is better than that of the [50] in RoF
over WDM system in terms of receiver sensitivity by around 7.94 dB. These
findings prove the efficiency of the proposed 3LCDM-RoF and 3LCDM-RoFWDM
systems to be applied in Wi-Fi. |
|---|