Studies On Starch-Solutes Interaction And Annealing On The Gelatinization Of Sago (Metroxylon Sagu) Starch By Differential Scanning Calorimetry

This study was conducted to study the gelatinization of sago starch by differential scanning calorimetry. Sago (Metroxylon sagu) starch was used because it is locally produced and the cheapest source of starch in this country. The effects of six parameters on the gelatinization of sago starch wer...

全面介紹

Saved in:
書目詳細資料
主要作者: Abd.Ghani, Maaruf
格式: Thesis
語言:English
English
出版: 1998
主題:
在線閱讀:http://psasir.upm.edu.my/id/eprint/11838/1/FSMB_1998_11_A.pdf
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:This study was conducted to study the gelatinization of sago starch by differential scanning calorimetry. Sago (Metroxylon sagu) starch was used because it is locally produced and the cheapest source of starch in this country. The effects of six parameters on the gelatinization of sago starch were conducted. These parameters were heating rates, water content, the presence of sugars and salts, annealing treatments and the effect of combinations of sugars-emulsifiers. For comparison, potato starch was also studied.Results of this study showed that sago starch was much easier to gelatinise, as their gelatinization temperature was relatively low. The differential scanning calorimetry (DSC) thermogram curves of sago starch were similar to that of potato starch, hence its, gelatinization property resembled that of potato starch. These results were based on various heating rates (1.0-30.0 °C/min) and water:starch ratios (0.1:1 to 4:1). This study also showed that a heating rate 10 °C/min was suitable for the measurement of the gelatinization for both starches. The gelatinization temperature and enthalpy (AH) for sago and potato starches in excess water were 60.2-77.1 °c and 15.54-15.78 Jig and 61.1-77.2 °c and 16.98-17.31 J/g, respectively. In excess and intermediate water contents single endothermic transitions (G) occurs and transformed into double endothermic (G and Md, respectively. However, in limited water contents only Ml occur.