Synthesis Of Hydroxyl-Alkoxylate Fatty Esters From Methyl Esters Of Palm Fatty Acid Distillate And Their Potential Application As Lubricant-Based Stock
Methyl ester of palm fatty acid distillate (PFAD-ME) was used to synthesize hydroxyl-alkoxylate fatty esters via epoxidation of its double bonds in the fatty acid chains and alcohol oxirane group cleavage reaction. The effects of reaction temperature, molar ratio of the hydrogen peroxide to PFAD-...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English |
| 出版: |
2010
|
| 主題: | |
| 在線閱讀: | http://psasir.upm.edu.my/id/eprint/12428/1/FS_2010_10A.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Methyl ester of palm fatty acid distillate (PFAD-ME) was used to synthesize
hydroxyl-alkoxylate fatty esters via epoxidation of its double bonds in the fatty acid
chains and alcohol oxirane group cleavage reaction. The effects of reaction
temperature, molar ratio of the hydrogen peroxide to PFAD-ME unsaturation and
molar ratio of the formic acid to the unsaturation on the epoxidation of PFAD-ME
were studied. The study showed that more than 98% conversion of the unsaturation
to epoxide ring moiety could be achieved within 3 hours of reaction period without
any catalyst with the molar ratio of unsaturation: formic acid: hydrogen peroxide of
1:1:4 respectively and reaction temperature of 50 °C. For the epoxy ring opening
process, optimization was also studied by changing various reaction parameters. The
amount of boron trifluoride ethyl etherate, the catalyst used for the ring opening
reaction of the epoxidized PFAD-ME with 2-ethyhexanol, was 0.75 % (wt/wt). The
ring-opening reaction was carried out at 70 °C for 3 hours.Other primary alcohols such as methanol, ethanol, n-propanol, n-butanol, iso-butanol,
n-pentanol, and n-hexanol were also used for the ring opening reaction of the
epoxidized PFAD-ME. The viscosity of the products improved by around 85% as
compared to those of the epoxidized PFAD-ME and original PFAD-ME. Although
their pour points were similar to that of the PFAD-ME of which was 18 °C, the cloud
point of the hydroxyl-alkoxylates decreased as the carbon chain of the alcohol used
was increased. The RBOT time increased from 27.9 min for the PFAD-ME to 120.4
min for epoxidized PFAD-ME indicating that introduction of the epoxy group in the
PFAD-ME increased its polarity. However, oxidation stability of the hydroxylalkoxylate
fatty ester after reacting with 2-ethylhexoxyl groups was slightly better
than that of the PFAD-ME. When the thermal stability of the products was examined
using TGA/DTG, it was observed that the decomposition temperature increased from
290 °C for PFAD-ME and epoxidized PFAD-ME to around 390 °C for the hydroxylalkoxylate
samples. |
|---|