Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia

Shallow landslide is normally occurred between 1 to 2 meter depth and it also normally occurs in highly and completely weathered rocks (Grades IV to VI) or known as residual soil. It can be very active and widespread in occurrence especially during rainy seasons where the soil moisture is saturated...

Full description

Saved in:

Bibliographic Details
Main Author:	Rosli, Mohd Hafiz
Format:	Thesis
Language:	English
Published:	2012
Subjects:	Landslides - Malaysia Landslide hazard analysis Slopes (Soil mechanics) - Malaysia - Stability
Online Access:	http://psasir.upm.edu.my/id/eprint/33338/1/FPAS%202012%2010R.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.33338
record_format	uketd_dc
spelling	my-upm-ir.333382015-03-11T02:49:06Z Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia 2012-01 Rosli, Mohd Hafiz Shallow landslide is normally occurred between 1 to 2 meter depth and it also normally occurs in highly and completely weathered rocks (Grades IV to VI) or known as residual soil. It can be very active and widespread in occurrence especially during rainy seasons where the soil moisture is saturated or nearly saturated. Due to spatial variability in rainfall and runoff, soil depths, land use and topographic characteristics, it is often difficult to predict and thus control the landslides occurrences at the catchment level. In this study an attempt has been made to evaluate the applicability of a slope stability model (SINMAP) to simulate shallow landslide in tropical environment. The study was carried out in Fraser Hill Catchment, a popular hill resort area in Peninsular Malaysia. Model input parameters include soil bulk density, friction angle, cohesion and hydraulic conductivity were gathered through in situ and laboratory analysis. Landslides locations were recorded using GPS as well as image interpretation of SPOT 5 satellite imagery to establish landslide source areas inventory. The historical landslide inventory was used to ass the model output performance. To evaluate the accuracy of the landslide susceptibility map produced by the model, two approaches were taken which are Success Rate (SR) and Modified Success Rate (MSR). Comparison between simulated model output and the historical landslide inventoried map were done through overlay analysis. The results indicated that 68% of the actual landslide inventoried fall within the unstable area predicted by the model. The model also indicated 70.5% of the catchment area is naturally unstable that most of the upper and middle part of the catchment is susceptible to shallow landslide, particularly areas where slopes are steep and lack of vegetation. When simulated using a 70 mm/hr of precipitation and estimated soil depth at 2.64 m, 89% of the catchment area is in saturated zone when the event occurred. Prior to that, 87% of the landslide inventory fall into that saturated zone and this indicate that hydrologic factors might triggered the landslide incidence in Fraser Hill. DEM spatial resolution effect on the landslide susceptibility map was assessed by aggregating the DEM into 20, 30, 40, 60 and 80 m resolution sizes. Result shows that using coarser DEM resolution, the accuracy of prediction decreased gradually. However, at 20 and 30 m DEM resolution the result doesn’t significantly change. Perfect DEM might not be available but choosing the right resolution for specific project is more important. Sensitivity analysis was done to evaluate model input parameters which are soil bulk density, friction angle, cohesion and ratio of transmissivity over recharge (T/R). Results from sensitivity analysis shows that the most significant parameter that gave the highest impact on total predicted susceptible landslide area is soil cohesion. By manipulating the mean soil cohesion value at ±0.5 Std. Dev (SD), ±1.0 SD and ± 2.0 SD, the changes in predicted unstable zone varies from 0.3% (+2.0SD) to 89.0% km2 (-2.0SD). Friction angle, bulk density and T/R input come second, third and fourth respectively. The simulated result was considered to be reasonably accurate taking into the consideration of constraint in the accuracy of the DEM constructed from 1: 50,000 topographic map. These findings may suggest that the model can be used as a decision support tool in many environmental impact analysis projects on catchment wide basis in this country. Landslides - Malaysia Landslide hazard analysis Slopes (Soil mechanics) - Malaysia - Stability 2012-01 Thesis http://psasir.upm.edu.my/id/eprint/33338/ http://psasir.upm.edu.my/id/eprint/33338/1/FPAS%202012%2010R.pdf application/pdf en public masters Universiti Putra Malaysia Landslides - Malaysia Landslide hazard analysis Slopes (Soil mechanics) - Malaysia - Stability
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English
topic	Landslides - Malaysia Landslide hazard analysis Slopes (Soil mechanics) - Malaysia - Stability
spellingShingle	Landslides - Malaysia Landslide hazard analysis Slopes (Soil mechanics) - Malaysia - Stability Rosli, Mohd Hafiz Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia
description	Shallow landslide is normally occurred between 1 to 2 meter depth and it also normally occurs in highly and completely weathered rocks (Grades IV to VI) or known as residual soil. It can be very active and widespread in occurrence especially during rainy seasons where the soil moisture is saturated or nearly saturated. Due to spatial variability in rainfall and runoff, soil depths, land use and topographic characteristics, it is often difficult to predict and thus control the landslides occurrences at the catchment level. In this study an attempt has been made to evaluate the applicability of a slope stability model (SINMAP) to simulate shallow landslide in tropical environment. The study was carried out in Fraser Hill Catchment, a popular hill resort area in Peninsular Malaysia. Model input parameters include soil bulk density, friction angle, cohesion and hydraulic conductivity were gathered through in situ and laboratory analysis. Landslides locations were recorded using GPS as well as image interpretation of SPOT 5 satellite imagery to establish landslide source areas inventory. The historical landslide inventory was used to ass the model output performance. To evaluate the accuracy of the landslide susceptibility map produced by the model, two approaches were taken which are Success Rate (SR) and Modified Success Rate (MSR). Comparison between simulated model output and the historical landslide inventoried map were done through overlay analysis. The results indicated that 68% of the actual landslide inventoried fall within the unstable area predicted by the model. The model also indicated 70.5% of the catchment area is naturally unstable that most of the upper and middle part of the catchment is susceptible to shallow landslide, particularly areas where slopes are steep and lack of vegetation. When simulated using a 70 mm/hr of precipitation and estimated soil depth at 2.64 m, 89% of the catchment area is in saturated zone when the event occurred. Prior to that, 87% of the landslide inventory fall into that saturated zone and this indicate that hydrologic factors might triggered the landslide incidence in Fraser Hill. DEM spatial resolution effect on the landslide susceptibility map was assessed by aggregating the DEM into 20, 30, 40, 60 and 80 m resolution sizes. Result shows that using coarser DEM resolution, the accuracy of prediction decreased gradually. However, at 20 and 30 m DEM resolution the result doesn’t significantly change. Perfect DEM might not be available but choosing the right resolution for specific project is more important. Sensitivity analysis was done to evaluate model input parameters which are soil bulk density, friction angle, cohesion and ratio of transmissivity over recharge (T/R). Results from sensitivity analysis shows that the most significant parameter that gave the highest impact on total predicted susceptible landslide area is soil cohesion. By manipulating the mean soil cohesion value at ±0.5 Std. Dev (SD), ±1.0 SD and ± 2.0 SD, the changes in predicted unstable zone varies from 0.3% (+2.0SD) to 89.0% km2 (-2.0SD). Friction angle, bulk density and T/R input come second, third and fourth respectively. The simulated result was considered to be reasonably accurate taking into the consideration of constraint in the accuracy of the DEM constructed from 1: 50,000 topographic map. These findings may suggest that the model can be used as a decision support tool in many environmental impact analysis projects on catchment wide basis in this country.
format	Thesis
qualification_level	Master's degree
author	Rosli, Mohd Hafiz
author_facet	Rosli, Mohd Hafiz
author_sort	Rosli, Mohd Hafiz
title	Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia
title_short	Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia
title_full	Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia
title_fullStr	Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia
title_full_unstemmed	Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia
title_sort	landslide susceptibility analysis using sinmap in fraser's hill, malaysia
granting_institution	Universiti Putra Malaysia
publishDate	2012
url	http://psasir.upm.edu.my/id/eprint/33338/1/FPAS%202012%2010R.pdf
_version_	1747811695066087424

Landslide susceptibility analysis using sinmap in Fraser's Hill, Malaysia

Similar Items