Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films

Polypyrrole-polyethylene glycol (PPy-PEG) conducting polymer composite films were electrochemically prepared on Indium Tin Oxide (ITO) glass electrode from an aqueous solution containing pyrrole monomer, p-toluene sulfonate dopant and poly (ethylene glycol) as an insulating polymer. The PPy-PEG c...

Full description

Saved in:
Bibliographic Details
Main Author: Lim, Mei Yee
Format: Thesis
Language:English
English
Published: 2007
Subjects:
Online Access:http://psasir.upm.edu.my/id/eprint/5026/1/FS_2007_32.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-upm-ir.5026
record_format uketd_dc
spelling my-upm-ir.50262013-05-27T07:19:52Z Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films 2007 Lim, Mei Yee Polypyrrole-polyethylene glycol (PPy-PEG) conducting polymer composite films were electrochemically prepared on Indium Tin Oxide (ITO) glass electrode from an aqueous solution containing pyrrole monomer, p-toluene sulfonate dopant and poly (ethylene glycol) as an insulating polymer. The PPy-PEG composite films prepared from different process conditions were characterized by Fourier Transform infrared (FT-IR) spectroscopy, electrical conductivity measurement, photoacoustic spectroscopy, X-ray diffraction (XRD) analysis and optical microscopy. The FT-IR study of PPy-PEG composite films shows the evidence of the incorporation of PEG in PPy structure forming PPy-PEG composite films. The highest electrical conductivity of 61 S/cm and thermal diffusivity of 7.88 x 10-7 m2s-1 were shown by the PPy-PEG composite film prepared from 0.20 M pyrrole, 0.10 M p-toluene sulfonate and 1 x 10-3 M PEG at 1.20 volt (vs SCE) at room temperature among all the PPy-PEG composite films produced. The conductivity data of PPy-PEG shows that with the increase in PEG concentration in the pyrrole solution, the electrical conductivity of the prepared PPy-PEG film increased up to certain level due to the increase in conjugation length and later it decreased with further increase in PEG concentration, which is again linked with the decrease in conjugation length. The measured values of thermal diffusivity and electrical conductivity for the PPy- PEG composites films showed that there was a correlation between thermal diffusivity and electrical conductivity. Both thermal diffusivity and electrical conductivity showed a similar peak for the same process condition in respective composite films. The XRD results of PPy-PEG composite films showed that the films were amorphous with very little order. The optical micrographs of PPy-PEG showed the globular surface morphology. The changes in globular surface morphology with the change in process condition of the film preparation indicated that the process parameters used to prepare the composite films had a strong influence over the surface morphology. Anthology films Electrochemical analysis 2007 Thesis http://psasir.upm.edu.my/id/eprint/5026/ http://psasir.upm.edu.my/id/eprint/5026/1/FS_2007_32.pdf application/pdf en public masters Universiti Putra Malaysia Anthology films Electrochemical analysis Science English
institution Universiti Putra Malaysia
collection PSAS Institutional Repository
language English
English
topic Anthology films
Electrochemical analysis

spellingShingle Anthology films
Electrochemical analysis

Lim, Mei Yee
Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films
description Polypyrrole-polyethylene glycol (PPy-PEG) conducting polymer composite films were electrochemically prepared on Indium Tin Oxide (ITO) glass electrode from an aqueous solution containing pyrrole monomer, p-toluene sulfonate dopant and poly (ethylene glycol) as an insulating polymer. The PPy-PEG composite films prepared from different process conditions were characterized by Fourier Transform infrared (FT-IR) spectroscopy, electrical conductivity measurement, photoacoustic spectroscopy, X-ray diffraction (XRD) analysis and optical microscopy. The FT-IR study of PPy-PEG composite films shows the evidence of the incorporation of PEG in PPy structure forming PPy-PEG composite films. The highest electrical conductivity of 61 S/cm and thermal diffusivity of 7.88 x 10-7 m2s-1 were shown by the PPy-PEG composite film prepared from 0.20 M pyrrole, 0.10 M p-toluene sulfonate and 1 x 10-3 M PEG at 1.20 volt (vs SCE) at room temperature among all the PPy-PEG composite films produced. The conductivity data of PPy-PEG shows that with the increase in PEG concentration in the pyrrole solution, the electrical conductivity of the prepared PPy-PEG film increased up to certain level due to the increase in conjugation length and later it decreased with further increase in PEG concentration, which is again linked with the decrease in conjugation length. The measured values of thermal diffusivity and electrical conductivity for the PPy- PEG composites films showed that there was a correlation between thermal diffusivity and electrical conductivity. Both thermal diffusivity and electrical conductivity showed a similar peak for the same process condition in respective composite films. The XRD results of PPy-PEG composite films showed that the films were amorphous with very little order. The optical micrographs of PPy-PEG showed the globular surface morphology. The changes in globular surface morphology with the change in process condition of the film preparation indicated that the process parameters used to prepare the composite films had a strong influence over the surface morphology.
format Thesis
qualification_level Master's degree
author Lim, Mei Yee
author_facet Lim, Mei Yee
author_sort Lim, Mei Yee
title Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films
title_short Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films
title_full Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films
title_fullStr Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films
title_full_unstemmed Preparation and Characterization of Polypyrrolepolyethylene Glycol Conducting Polymer Composite Films
title_sort preparation and characterization of polypyrrolepolyethylene glycol conducting polymer composite films
granting_institution Universiti Putra Malaysia
granting_department Science
publishDate 2007
url http://psasir.upm.edu.my/id/eprint/5026/1/FS_2007_32.pdf
_version_ 1747810334185357312