Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method

A non-conventional hybrid machining method called electrical discharge turning (EDT) process is optimized in this research. The EDT process is a suitable method to produce small components with cylindrical geometries. This process is a type of hybrid electrical discharge machining (EDM), hence the m...

Full description

Saved in:

Bibliographic Details
Main Author:	Matoorian, Pooria
Format:	Thesis
Language:	English
Published:	2008
Subjects:	Electric discharges Taguchi methods (Quality control)
Online Access:	http://psasir.upm.edu.my/id/eprint/5349/1/FK_2008_7%20IR.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.5349
record_format	uketd_dc
spelling	my-upm-ir.53492021-12-30T02:40:13Z Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method 2008-01 Matoorian, Pooria A non-conventional hybrid machining method called electrical discharge turning (EDT) process is optimized in this research. The EDT process is a suitable method to produce small components with cylindrical geometries. This process is a type of hybrid electrical discharge machining (EDM), hence the material is removed by the action of electrical discharges between the tool electrode and the workpiece. It means materials of any hardness can be removed as long as the workpiece can conduct electricity. This makes the EDT process suitable for machining hard, difficult-to-machine materials. In this process linear geometry of a tool electrode reproducing the same geometry in the rotating workpiece cylindrically. In this study, a dressed copper block (8mm × 10mm × 50mm) serving as the forming tool electrode is fixed on the work table and rotary workpiece uses the rotational motion of 4th (C) axis of the machine. The Taguchi Robust Design method was used to determine the optimum machining performance namely the highest material removal rate (MRR) and the lowest surface roughness (SR) for EDT of High Speed Steel (HSS) 5%-Cobalt. Six control factors namely, Intensity, Pulse-on time, Pulse-off time, Voltage, Servo, and Spindle speed were considered. Based on the analysis of variance (ANOVA) all six factors were influential for MRR but for SR rotational speed did not show any influence. Intensity was the most significant factor for both response of MRR and SR. Signal to Noise (S/N) analysis was performed and optimum levels of the mentioned factors for highest MRR and the lowest SR was achieved based on the S/N ratios. Results of confirmation tests shown the improvement of MRR and SR in optimum condition were 9.17 and 6.54 dB respectively. Finally general linear regression models were derived for 95% confidence interval to predict the output response. The p-value for the used α-level of 0.05 concluded that at least one of the regression coefficients is significantly different from zero and the linear predictors are not sufficient to explain the variation. Electric discharges Taguchi methods (Quality control) 2008-01 Thesis http://psasir.upm.edu.my/id/eprint/5349/ http://psasir.upm.edu.my/id/eprint/5349/1/FK_2008_7%20IR.pdf text en public masters Universiti Putra Malaysia Electric discharges Taguchi methods (Quality control) Faculty of Engineering Sulaiman,, Shamsudin
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English
advisor	Sulaiman,, Shamsudin
topic	Electric discharges Taguchi methods (Quality control)
spellingShingle	Electric discharges Taguchi methods (Quality control) Matoorian, Pooria Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
description	A non-conventional hybrid machining method called electrical discharge turning (EDT) process is optimized in this research. The EDT process is a suitable method to produce small components with cylindrical geometries. This process is a type of hybrid electrical discharge machining (EDM), hence the material is removed by the action of electrical discharges between the tool electrode and the workpiece. It means materials of any hardness can be removed as long as the workpiece can conduct electricity. This makes the EDT process suitable for machining hard, difficult-to-machine materials. In this process linear geometry of a tool electrode reproducing the same geometry in the rotating workpiece cylindrically. In this study, a dressed copper block (8mm × 10mm × 50mm) serving as the forming tool electrode is fixed on the work table and rotary workpiece uses the rotational motion of 4th (C) axis of the machine. The Taguchi Robust Design method was used to determine the optimum machining performance namely the highest material removal rate (MRR) and the lowest surface roughness (SR) for EDT of High Speed Steel (HSS) 5%-Cobalt. Six control factors namely, Intensity, Pulse-on time, Pulse-off time, Voltage, Servo, and Spindle speed were considered. Based on the analysis of variance (ANOVA) all six factors were influential for MRR but for SR rotational speed did not show any influence. Intensity was the most significant factor for both response of MRR and SR. Signal to Noise (S/N) analysis was performed and optimum levels of the mentioned factors for highest MRR and the lowest SR was achieved based on the S/N ratios. Results of confirmation tests shown the improvement of MRR and SR in optimum condition were 9.17 and 6.54 dB respectively. Finally general linear regression models were derived for 95% confidence interval to predict the output response. The p-value for the used α-level of 0.05 concluded that at least one of the regression coefficients is significantly different from zero and the linear predictors are not sufficient to explain the variation.
format	Thesis
qualification_level	Master's degree
author	Matoorian, Pooria
author_facet	Matoorian, Pooria
author_sort	Matoorian, Pooria
title	Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
title_short	Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
title_full	Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
title_fullStr	Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
title_full_unstemmed	Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method
title_sort	optimization of material removal rate and surface roughness using the taguchi method
granting_institution	Universiti Putra Malaysia
granting_department	Faculty of Engineering
publishDate	2008
url	http://psasir.upm.edu.my/id/eprint/5349/1/FK_2008_7%20IR.pdf
_version_	1747810405458116608

Optimization Of Material Removal Rate And Surface Roughness Using The Taguchi Method

Similar Items