Removal of iron and oil from palm oil mill effluent using chitosan coated alginate–mangrove composite beads
This research focuses on the removal of iron ions and residue oil from palm oil mill effluent using chitosan-coated alginate–mangrove composite beads (CCAMCB). The Fourier transforms infrared spectroscopy (FTIR) was used to reveal the main functional groups and to prove the successful coating...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2016
|
Subjects: | |
Online Access: | http://psasir.upm.edu.my/id/eprint/66880/1/FK%202016%20138%20IR.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | This research focuses on the removal of iron ions and residue oil from palm oil mill
effluent using chitosan-coated alginate–mangrove composite beads (CCAMCB). The
Fourier transforms infrared spectroscopy (FTIR) was used to reveal the main functional
groups and to prove the successful coating of beads by chitosan, and scanning electron
microscope (SEM) with energy dispersive X-ray spectroscopy (EDX) and swelling
studies were employed to discover the surface morphology, chemical composition and
identify the crystalline nature of the beads, respectively. The adsorption process was
conducted through batch studies and continuous studies. In batch studies, the influence
of different experimental parameters such as pH, adsorbent dosage, contact time, and
initial concentration on iron ions and residue oil removal was investigated to determine
the optimum operating conditions. The results of the batch studies reveal that the
maximum removal of iron ions was 92.7% at pH 3, 300 g/L of adsorbent concentration,
and contact time of 72 hours, and the maximum removal of residue oil was 98.47% at
pH 3, 50 g/L of adsorbent concentration, and contact time of 2.5 hours. The adsorption
isotherm studies reveal that both iron ions and residue oil followed the Freundlich
isotherm model, and in terms of kinetic studies, both iron ions and residue oil followed
the pseudo second order. Continuous studies were performed in a fixed bed column
with different bed heights, and it was found that the time of breakthrough increased
with a higher bed depth. The Thomas model and Yoon-Nelson model were used to
estimate the experimental data.
As a conclusion, the CCAMCB demonstrated a potential application to remove iron
ions and residue oil from POME. |
---|