Activated carbon from oil palm mesocarp fiber for the treatment of final discharge of palm oil effluent
Malaysia palm oil industry produced abundant amounts of solid and liquid biomass annually. The current disposal practice is not environmentally friendly, with viable biomass for production of value added product being wasted. It is desirable to reuse the biomass as a feedstock for production of a...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/67052/1/FBSB%202016%2030%20IR.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Malaysia palm oil industry produced abundant amounts of solid and liquid
biomass annually. The current disposal practice is not environmentally friendly,
with viable biomass for production of value added product being wasted. It is
desirable to reuse the biomass as a feedstock for production of activated carbon
and use it to treat palm oil mill final discharge to achieve zero emission system.
This study aimed to reduce the COD and suspended solids content of palm oil
mill final discharge using oil palm mesocarp fiber activated by steam and
phosphoric acid.
The oil palm mesocarp fiber activated carbon was successfully produced either
using steam and phosphoric acid as activating agents in a two-step process at a
temperature of 600°C for 30 minutes. The resulting activated carbon BET
surface area was found to be 494 and 1090 m2/g, respectively, which are
comparable to commercial activated carbon. The activated carbon also shows
pore development compared to raw material from SEM analysis. Oil palm
mesocarp fiber activated carbon was used to treat palm oil mill final discharge
and the effect of adsorbent dosage, treatment time, adsorbate concentration and
consecutive treatments was studied.
The oil palm mesocarp fiber activated carbon were able to reduce the COD and
suspended solids content of the final discharge with a COD percent removal of
70% and 42 % for phosphoric acid and steam activated mesocarp fiber at 10 g/L
dosage, respectively. For suspended solids, the removal percent was 85% and
81%, respectively. The amount of pollutant reduced increased as the adsorbent
dosage increase and remained constant after 10 g/L. In terms of treatment time,
as the treatment time increased, the amount of pollutants that were removed
increased until a certain amount of time, which was found to be 6 hours for both
COD and suspended solids content. For adsorbate concentration, as the COD initial concentration increased, reduction of pollutants for phosphoric acid
activated carbon maintained, while steam activated carbon shows a higher
reduction at lower concentration. For suspended solids, a similar effect was
observed. The effect of consecutive treatment was also studied, with the
increasing number of treatments resulting in a higher total reduction of pollutants.
Consecutive small dosage treatment also proves to be more efficient compared
to a single large dosage treatment.
It can be concluded that oil palm mesocarp fiber is a viable feedstock for
activated carbon production, with resulting activated carbon able to reduce the
pollutants in palm oil mill final discharge. |
|---|