Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application
RFID stands for Radio Frequency Identification. The major purpose that RFID system is built for is to transfer data on a transponder (tag) that can be regained with a transceiver by means of a wireless connection. The contactless Identification (ID) system depends on data transmission by radio...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English |
Published: |
2017
|
Subjects: | |
Online Access: | http://psasir.upm.edu.my/id/eprint/68620/1/FK%202018%2061%20IR.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
id |
my-upm-ir.68620 |
---|---|
record_format |
uketd_dc |
spelling |
my-upm-ir.686202019-05-24T01:21:03Z Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application 2017-12 Dawood, Bahaa Abbas RFID stands for Radio Frequency Identification. The major purpose that RFID system is built for is to transfer data on a transponder (tag) that can be regained with a transceiver by means of a wireless connection. The contactless Identification (ID) system depends on data transmission by radio frequency electromagnetic (EM) signals, and accordingly, the whole functionality is weather independent and non-lineof- sight. These features for ID system copes the optical barcodes limitations, which are weather dependent, line-of-sight, and manual operation requirement. Most of RFID tags consisted of integrated circuit (IC) or a Chip and an antenna. The IC executes all of the data processing and is energized by extracting the power from the interrogation signal transferred by the RFID reader. The tag antenna controls the amount of power transmitted from the reader to the tag and the reflect signal from the tag to the reader. Nevertheless, there are no restrictions on the physical parameters of the readers antenna, such as being small or planar in size, these restrictions do stratify on the tags antenna. In a matter of fact, the tag miniaturizing in size is limited by the tag antenna size. Wearable antenna is described as an antenna designed to be an integral part of garment to be worn on the body. The use of radios and antennas in clothing are less cumbersome to the handler compared with traditional handheld whip and radios antennas due to its advantages in long-term use. Wearable antennas were first adopted for home-nursing, hospital patient clothing and clothes rescue workers. This thesis reports on the design, fabrication, and measurement of Ultra High Frequency (UHF) RFID tag antennas (860 to 960 MHz), which can be used in bodycentric applications. The introduced tag antennas are designed and fabricated to accomplish low tagging costs, good performance, as well as tagging Wireless Body Area network (WBAN) objects with small size tags. First, full embroidery electro textile RFID tag antenna was designed and tested. In this design, a slotted small size antenna is proposed and designed for wearable bodycentric objects UHF RFID (860-960) MHz. The antenna structure embroidered on %100 Polyester as a substrate. Furthermore, E-shaped inductive feeder consists of two opposing symmetrical E-shaped structures to feed the top radiator for antenna. The antenna size is 74×20×2.75 mm3 at 915 MHz. The peak gain for the antenna reached to 0 dBi at 915 MHz. The antenna bandwidth is 19 MHz (908-927) MHz (power reflection coefficient lower than -3 dB). The measurement result shows very good impedance matching due to the flexibility given by the E-shaped slotted inductive feeder; moreover, there is a very good agreement with simulations results. The design shows a good gain and good performance. This antenna introduced to fill up the need for tagging for long range and mounted for body-centric objects such as access tagging integrated with clothes and in healthcare system. Radio frequency identification systems Radio frequency - Identification 2017-12 Thesis http://psasir.upm.edu.my/id/eprint/68620/ http://psasir.upm.edu.my/id/eprint/68620/1/FK%202018%2061%20IR.pdf text en public masters Universiti Putra Malaysia Radio frequency identification systems Radio frequency - Identification |
institution |
Universiti Putra Malaysia |
collection |
PSAS Institutional Repository |
language |
English |
topic |
Radio frequency identification systems Radio frequency - Identification |
spellingShingle |
Radio frequency identification systems Radio frequency - Identification Dawood, Bahaa Abbas Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application |
description |
RFID stands for Radio Frequency Identification. The major purpose that RFID system
is built for is to transfer data on a transponder (tag) that can be regained with a
transceiver by means of a wireless connection. The contactless Identification (ID)
system depends on data transmission by radio frequency electromagnetic (EM)
signals, and accordingly, the whole functionality is weather independent and non-lineof-
sight. These features for ID system copes the optical barcodes limitations, which
are weather dependent, line-of-sight, and manual operation requirement. Most of
RFID tags consisted of integrated circuit (IC) or a Chip and an antenna. The IC
executes all of the data processing and is energized by extracting the power from the
interrogation signal transferred by the RFID reader. The tag antenna controls the
amount of power transmitted from the reader to the tag and the reflect signal from the
tag to the reader. Nevertheless, there are no restrictions on the physical parameters of
the readers antenna, such as being small or planar in size, these restrictions do stratify
on the tags antenna. In a matter of fact, the tag miniaturizing in size is limited by the
tag antenna size.
Wearable antenna is described as an antenna designed to be an integral part of garment
to be worn on the body. The use of radios and antennas in clothing are less
cumbersome to the handler compared with traditional handheld whip and radios
antennas due to its advantages in long-term use. Wearable antennas were first adopted
for home-nursing, hospital patient clothing and clothes rescue workers.
This thesis reports on the design, fabrication, and measurement of Ultra High
Frequency (UHF) RFID tag antennas (860 to 960 MHz), which can be used in bodycentric
applications. The introduced tag antennas are designed and fabricated to accomplish low tagging costs, good performance, as well as tagging Wireless Body
Area network (WBAN) objects with small size tags.
First, full embroidery electro textile RFID tag antenna was designed and tested. In this
design, a slotted small size antenna is proposed and designed for wearable bodycentric
objects UHF RFID (860-960) MHz. The antenna structure embroidered on
%100 Polyester as a substrate. Furthermore, E-shaped inductive feeder consists of two
opposing symmetrical E-shaped structures to feed the top radiator for antenna. The
antenna size is 74×20×2.75 mm3 at 915 MHz. The peak gain for the antenna reached
to 0 dBi at 915 MHz. The antenna bandwidth is 19 MHz (908-927) MHz (power
reflection coefficient lower than -3 dB). The measurement result shows very good
impedance matching due to the flexibility given by the E-shaped slotted inductive
feeder; moreover, there is a very good agreement with simulations results. The design
shows a good gain and good performance. This antenna introduced to fill up the need
for tagging for long range and mounted for body-centric objects such as access
tagging integrated with clothes and in healthcare system. |
format |
Thesis |
qualification_level |
Master's degree |
author |
Dawood, Bahaa Abbas |
author_facet |
Dawood, Bahaa Abbas |
author_sort |
Dawood, Bahaa Abbas |
title |
Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application |
title_short |
Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application |
title_full |
Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application |
title_fullStr |
Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application |
title_full_unstemmed |
Slotted UHF RFID full embroidery e-textile wearable tag antenna for WBAN application |
title_sort |
slotted uhf rfid full embroidery e-textile wearable tag antenna for wban application |
granting_institution |
Universiti Putra Malaysia |
publishDate |
2017 |
url |
http://psasir.upm.edu.my/id/eprint/68620/1/FK%202018%2061%20IR.pdf |
_version_ |
1747812608137756672 |