Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites
Over the past century, there has been a dramatic increase in fabrication and synthesizing of porous ceramics. However, only a few of them used waste material to fabricate alumina porous ceramics and reinforced it using nano-copper (Cu) particles. The motivation behind these efforts are the increasin...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2017
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/70138/1/FK%202017%2096%20IR.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my-upm-ir.70138 |
|---|---|
| record_format |
uketd_dc |
| institution |
Universiti Putra Malaysia |
| collection |
PSAS Institutional Repository |
| language |
English |
| topic |
Porous materials Composite materials - Environmental aspects Graphite |
| spellingShingle |
Porous materials Composite materials - Environmental aspects Graphite Ali, Mohammed Sabah Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| description |
Over the past century, there has been a dramatic increase in fabrication and synthesizing of porous ceramics. However, only a few of them used waste material to fabricate alumina porous ceramics and reinforced it using nano-copper (Cu) particles. The motivation behind these efforts are the increasing raw materials cost and decreasing natural resources consumption which requires the use of byproducts and wastes as raw material for different industrial processes. This is a step towards environmental protection, sustainable development, and also to produce porous alumina ceramics with good porosity and mechanical properties. Thus, in this study, porous alumina ceramics were fabricated using graphite waste, natural active yeast, and rice husk ash as pore-forming agents and source of silica (SiO2). Series of porous alumina ceramics was prepared using powder metallurgy technique. The physical and mechanical properties of porous alumina ceramics with and without nano-copper (Cu) particles were measured by differential thermal analysis (DTA), energy-dispersive X-ray spectroscopy (EDX), linear shrinkage, average density (green and sintered) data measurement, and Universal Testing Machine (UTM). The average densities for both green and sintered samples decrease with increasing pore forming agent ratio for porous alumina ceramics with and without nano-copper (Cu) particles. While the linear shrinkage increases with the increase of pore forming agent ratio with and without nano-copper (Cu) particles. Besides, the structural properties of porous alumina ceramics with and without nanocopper (Cu) particles, ceramic phases, morphology, and porosity were examined using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). The effects of the pore-forming agent ratios on the mechanical properties, the porosity and the microstructure with and without nano-copper (Cu) particles have been investigated in this study. The results showed that through increasing the pore-forming agent ratio for graphite waste, natural active yeast, and rice husk ash, the porosity increased from 37.3 to 61.1%, 30.2 to 63.8% and 42.9 to 49.0%, respectively. The hardness also decreased from 172.6 to 38.1 HV1 and from 160.6 to 15.0 HV1 for porous alumina ceramics using graphite waste and yeast as pore-forming agents, respectively.
However, the hardness of the porous alumina ceramics with rice husk ash as a pore-forming agent increased at 30 wt.% (150.9 HV1) and 50 wt.% (158.9 HV1). The tensile strength for porous alumina ceramics using graphite waste and natural active yeast as pore-forming agents decreased from 24.9 to 14.3 MPa and from 26.2 to 5.4 MPa, respectively. The compressive strength decreased from 112.3 to 34.3 MPa and from 19.5 to 1.8 MPa, respectively. The flexural strength decreased from 71.28 MPa to 30.42 MPa and from 72.56 MPa to 20.72 MPa, respectively. However, for porous alumina ceramics using rice husk ash, the tensile strength increased at 30 wt.% (24.1 MPa) and 50 wt.% (21.9 MPa). The compressive strength also increased at 30 wt.% (69.7 MP) and at 50% (60.1 MPa). The flexural strength increased at 30 wt.% (93.38 MPa) and 50 wt.% (92.38 MPa). The variation in mechanical properties was also attributed to the formation of ceramic phases such as mullite, cristobalite, corundum, and sillimanite other than the formation porosity. It is also found that with increasing porosity, the mechanical properties decrease. This is a good agreement with Rice’s formula. While by adding nano-copper (Cu) particles all mechanical properties improved with increasing Cu ratio which attributed to decrease porosity and formation ceramic phases such as tenorite (CuO). |
| format |
Thesis |
| qualification_level |
Doctorate |
| author |
Ali, Mohammed Sabah |
| author_facet |
Ali, Mohammed Sabah |
| author_sort |
Ali, Mohammed Sabah |
| title |
Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| title_short |
Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| title_full |
Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| title_fullStr |
Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| title_full_unstemmed |
Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| title_sort |
physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites |
| granting_institution |
Universiti Putra Malaysia |
| publishDate |
2017 |
| url |
http://psasir.upm.edu.my/id/eprint/70138/1/FK%202017%2096%20IR.pdf |
| _version_ |
1747812767524454400 |
| spelling |
my-upm-ir.701382019-08-16T00:40:15Z Physical and mechanical properties of nanocopper particle-reinforced alumina matrix composites 2017-09 Ali, Mohammed Sabah Over the past century, there has been a dramatic increase in fabrication and synthesizing of porous ceramics. However, only a few of them used waste material to fabricate alumina porous ceramics and reinforced it using nano-copper (Cu) particles. The motivation behind these efforts are the increasing raw materials cost and decreasing natural resources consumption which requires the use of byproducts and wastes as raw material for different industrial processes. This is a step towards environmental protection, sustainable development, and also to produce porous alumina ceramics with good porosity and mechanical properties. Thus, in this study, porous alumina ceramics were fabricated using graphite waste, natural active yeast, and rice husk ash as pore-forming agents and source of silica (SiO2). Series of porous alumina ceramics was prepared using powder metallurgy technique. The physical and mechanical properties of porous alumina ceramics with and without nano-copper (Cu) particles were measured by differential thermal analysis (DTA), energy-dispersive X-ray spectroscopy (EDX), linear shrinkage, average density (green and sintered) data measurement, and Universal Testing Machine (UTM). The average densities for both green and sintered samples decrease with increasing pore forming agent ratio for porous alumina ceramics with and without nano-copper (Cu) particles. While the linear shrinkage increases with the increase of pore forming agent ratio with and without nano-copper (Cu) particles. Besides, the structural properties of porous alumina ceramics with and without nanocopper (Cu) particles, ceramic phases, morphology, and porosity were examined using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). The effects of the pore-forming agent ratios on the mechanical properties, the porosity and the microstructure with and without nano-copper (Cu) particles have been investigated in this study. The results showed that through increasing the pore-forming agent ratio for graphite waste, natural active yeast, and rice husk ash, the porosity increased from 37.3 to 61.1%, 30.2 to 63.8% and 42.9 to 49.0%, respectively. The hardness also decreased from 172.6 to 38.1 HV1 and from 160.6 to 15.0 HV1 for porous alumina ceramics using graphite waste and yeast as pore-forming agents, respectively. However, the hardness of the porous alumina ceramics with rice husk ash as a pore-forming agent increased at 30 wt.% (150.9 HV1) and 50 wt.% (158.9 HV1). The tensile strength for porous alumina ceramics using graphite waste and natural active yeast as pore-forming agents decreased from 24.9 to 14.3 MPa and from 26.2 to 5.4 MPa, respectively. The compressive strength decreased from 112.3 to 34.3 MPa and from 19.5 to 1.8 MPa, respectively. The flexural strength decreased from 71.28 MPa to 30.42 MPa and from 72.56 MPa to 20.72 MPa, respectively. However, for porous alumina ceramics using rice husk ash, the tensile strength increased at 30 wt.% (24.1 MPa) and 50 wt.% (21.9 MPa). The compressive strength also increased at 30 wt.% (69.7 MP) and at 50% (60.1 MPa). The flexural strength increased at 30 wt.% (93.38 MPa) and 50 wt.% (92.38 MPa). The variation in mechanical properties was also attributed to the formation of ceramic phases such as mullite, cristobalite, corundum, and sillimanite other than the formation porosity. It is also found that with increasing porosity, the mechanical properties decrease. This is a good agreement with Rice’s formula. While by adding nano-copper (Cu) particles all mechanical properties improved with increasing Cu ratio which attributed to decrease porosity and formation ceramic phases such as tenorite (CuO). Porous materials Composite materials - Environmental aspects Graphite 2017-09 Thesis http://psasir.upm.edu.my/id/eprint/70138/ http://psasir.upm.edu.my/id/eprint/70138/1/FK%202017%2096%20IR.pdf text en public doctoral Universiti Putra Malaysia Porous materials Composite materials - Environmental aspects Graphite |