Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil

Low Reynolds number flows are associated with the problems of separation bubble. The presence of separation bubble reduces the performance of the airfoil. The most commonly used devices in order to increase the performance in these Reynolds number range are Vortex Generators (VG). Recently studie...

Full description

Saved in:

Bibliographic Details
Main Author:	Aftab, Syed Mohammed Aminuddin
Format:	Thesis
Language:	English
Published:	2017
Subjects:	Turbulence Flow visualization Vortex-motion
Online Access:	http://psasir.upm.edu.my/id/eprint/71146/1/FK%202017%2039%20UPMIR.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.71146
record_format	uketd_dc
spelling	my-upm-ir.711462023-12-19T04:17:47Z Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil 2017-03 Aftab, Syed Mohammed Aminuddin Low Reynolds number flows are associated with the problems of separation bubble. The presence of separation bubble reduces the performance of the airfoil. The most commonly used devices in order to increase the performance in these Reynolds number range are Vortex Generators (VG). Recently studies have shown that implementing humpback whale Tubercle Leading Edge (TLE), also enhance the performance of the airfoil. The objective of the current work is to combine TLE and VG thereby elimination of separation bubble and increase airfoil lift to drag ratio. Initially the flow over NACA 4415 at low Reynolds number (Re) of 120,000 using Computational Fluid Dynamics (CFD) is carried out, and proper methodology for selection of turbulence model for low Re flows is also reported. Five turbulence models, were tested and it was found that γ-Reϴ sst was the best suitable Reynolds Averaged Navier Stokes (RANS) model to capture the flow physics. The main mesh requirements for utilizing y-Reϴ sst is to maintain the wall y+ <1. Throughout the thesis, structured meshing has been carried out using ICEM CFD. The established turbulence model was used to conduct CFD analysis on two Tubercle Leading Edge (TLE) designs. The designs tested are, 1. Spherical 2. Sinusoidal, the geometry is modeled using CATIA V5R21. A parametric study varying the amplitude of the tubercles is also carried out. The wavelength was kept constant at 0.25c three amplitude variations 0.025c, 0.05c and 0.075c, were modeled for both spherical and sinusoidal tubercles designs. The flow Re was set to 120,000. As the tip effects were neglected, the results are for 2.5D, only the effect of span is taken into consideration. A 3D hex grid was generated around the rectangular domain with a span of 0.5c. The results showed that spherical tubercle with 0.025c amplitude was efficient at 18°AoA, it increased the l/d ratio by 6.25%. Based on these CFD results, a modified NACA 4415 airfoil with spherical TLE was fabricated. Wind tunnel testing was carried out at Re 200,000. The results were compared with previous experimental work on NACA 4415 with straight leading edge. The results of spherical TLE showed an improvement in lift to drag ratio by 67.3% at 0°, 14% at 6°, 17.6% at 12° and the performance decrement at 18° by 3.23%. This proves that spherical TLE do improve the performance but Re number effect is an important aspect which needs to be studied. Finally a CFD analysis combining spherical TLE and VG is studied. This is the novelty of the current research is the combination of TLE and VG. The results showed that the combination enhanced the performance of clean airfoil by 8.9%. TLE and VG combination improved performance by 50% at 12º AoA as compared to merely TLE airfoil. The breakthrough finding was the working mechanism of spherical TLE which appeared similar to sub boundary layer VG. Thus the combination of TLE and VG gives a major boost in enhancing the performance of airfoil working in low Re range. Turbulence Flow visualization Vortex-motion 2017-03 Thesis http://psasir.upm.edu.my/id/eprint/71146/ http://psasir.upm.edu.my/id/eprint/71146/1/FK%202017%2039%20UPMIR.pdf text en public doctoral Universiti Putra Malaysia Turbulence Flow visualization Vortex-motion Ahmad, Kamarul Arifin
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English
advisor	Ahmad, Kamarul Arifin
topic	Turbulence Flow visualization Vortex-motion
spellingShingle	Turbulence Flow visualization Vortex-motion Aftab, Syed Mohammed Aminuddin Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
description	Low Reynolds number flows are associated with the problems of separation bubble. The presence of separation bubble reduces the performance of the airfoil. The most commonly used devices in order to increase the performance in these Reynolds number range are Vortex Generators (VG). Recently studies have shown that implementing humpback whale Tubercle Leading Edge (TLE), also enhance the performance of the airfoil. The objective of the current work is to combine TLE and VG thereby elimination of separation bubble and increase airfoil lift to drag ratio. Initially the flow over NACA 4415 at low Reynolds number (Re) of 120,000 using Computational Fluid Dynamics (CFD) is carried out, and proper methodology for selection of turbulence model for low Re flows is also reported. Five turbulence models, were tested and it was found that γ-Reϴ sst was the best suitable Reynolds Averaged Navier Stokes (RANS) model to capture the flow physics. The main mesh requirements for utilizing y-Reϴ sst is to maintain the wall y+ <1. Throughout the thesis, structured meshing has been carried out using ICEM CFD. The established turbulence model was used to conduct CFD analysis on two Tubercle Leading Edge (TLE) designs. The designs tested are, 1. Spherical 2. Sinusoidal, the geometry is modeled using CATIA V5R21. A parametric study varying the amplitude of the tubercles is also carried out. The wavelength was kept constant at 0.25c three amplitude variations 0.025c, 0.05c and 0.075c, were modeled for both spherical and sinusoidal tubercles designs. The flow Re was set to 120,000. As the tip effects were neglected, the results are for 2.5D, only the effect of span is taken into consideration. A 3D hex grid was generated around the rectangular domain with a span of 0.5c. The results showed that spherical tubercle with 0.025c amplitude was efficient at 18°AoA, it increased the l/d ratio by 6.25%. Based on these CFD results, a modified NACA 4415 airfoil with spherical TLE was fabricated. Wind tunnel testing was carried out at Re 200,000. The results were compared with previous experimental work on NACA 4415 with straight leading edge. The results of spherical TLE showed an improvement in lift to drag ratio by 67.3% at 0°, 14% at 6°, 17.6% at 12° and the performance decrement at 18° by 3.23%. This proves that spherical TLE do improve the performance but Re number effect is an important aspect which needs to be studied. Finally a CFD analysis combining spherical TLE and VG is studied. This is the novelty of the current research is the combination of TLE and VG. The results showed that the combination enhanced the performance of clean airfoil by 8.9%. TLE and VG combination improved performance by 50% at 12º AoA as compared to merely TLE airfoil. The breakthrough finding was the working mechanism of spherical TLE which appeared similar to sub boundary layer VG. Thus the combination of TLE and VG gives a major boost in enhancing the performance of airfoil working in low Re range.
format	Thesis
qualification_level	Doctorate
author	Aftab, Syed Mohammed Aminuddin
author_facet	Aftab, Syed Mohammed Aminuddin
author_sort	Aftab, Syed Mohammed Aminuddin
title	Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
title_short	Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
title_full	Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
title_fullStr	Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
title_full_unstemmed	Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil
title_sort	numerical and experimental study of leading edge tubercles with vortex generators on naca 4415 airfoil
granting_institution	Universiti Putra Malaysia
publishDate	2017
url	http://psasir.upm.edu.my/id/eprint/71146/1/FK%202017%2039%20UPMIR.pdf
_version_	1794018903000612864

Numerical and experimental study of leading edge tubercles with vortex generators on NACA 4415 airfoil

Similar Items