Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites

The excessive application of chemicals during the NCC production led to harmful chemical discharge that can damage the environment. The process of NCC production can be shorten by excluding the bleaching process and retain partial of lignin within NCC. Lignin was found to be high in thermal stabilit...

Full description

Saved in:

Bibliographic Details
Main Author:	Sabaruddin, Fatimah Athiyah
Format:	Thesis
Language:	English
Published:	2019
Subjects:	Lignin - Biodegradation Cellulose nanocrystals Bleaching
Online Access:	http://psasir.upm.edu.my/id/eprint/79346/1/IPTPH%202019%2010%20ir.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.79346
record_format	uketd_dc
spelling	my-upm-ir.793462022-01-12T02:24:39Z Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites 2019-04 Sabaruddin, Fatimah Athiyah The excessive application of chemicals during the NCC production led to harmful chemical discharge that can damage the environment. The process of NCC production can be shorten by excluding the bleaching process and retain partial of lignin within NCC. Lignin was found to be high in thermal stability as it was able to withstand high temperature up to 900 ˚C. Lignin also possess polar and non-polar groups in its chain network which make lignin as good compatibilizer. The implication of lignin in NCC surface has been reported, however its effect on the nanocomposites has not been discussed yet. Hence, if lignin can be retained in NCC and posing no significant adverse effect on the composites, it would give a new perspective in the NCC application. Therefore, in this study, NCC from KC was produced through the soda-AQ pulping process and the lignin content in NCC were varied via different sequence of bleaching. Four different pulps were produced from the bleaching process denoted as UB (unbleached pulps), B1 (bleached up to stage D1), B2 (bleached up to stage D2), and B3 (bleached up to stage D3). All pulps were proceeded with acid hydrolysis treatment to produce the NCCs. All NCCs were analysed having different lignin content which confirmed via chemical analysis and kappa number test. The thermal analysis shows that, the NCC of high lignin content was not able to resist early thermal degradation temperature but was able to withstand a temperature up to 700 ℃ with highest amount of residual char. The NCCs (0.5 and 1 wt. %) then were incorporated within kenaf core reinforced polypropylene (PP/KC) composites with addition of 1 wt % of maleic anhydride grafted polypropylene (MAPP) and its effect on physical, chemical, mechanical, and thermal properties were determined. Overall, the presence of lignin in NCC help to improve the thermal stability of the nanocomposites with marginal effect on the mechanical properties. Furthermore, post alkaline treatment were done upon NCC having different bleaching condition to remove the remaining sulphates as by-product of acid hydrolysis process. However, post alkaline treatment were analysed to be unnecessary for unbleached NCC as it did not give any significant effect to the properties of the NCC and the nanocomposites. Lignin - Biodegradation Cellulose nanocrystals Bleaching 2019-04 Thesis http://psasir.upm.edu.my/id/eprint/79346/ http://psasir.upm.edu.my/id/eprint/79346/1/IPTPH%202019%2010%20ir.pdf text en public doctoral Universiti Putra Malaysia Lignin - Biodegradation Cellulose nanocrystals Bleaching Md Tahir, Paridah
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English
advisor	Md Tahir, Paridah
topic	Lignin - Biodegradation Cellulose nanocrystals Bleaching
spellingShingle	Lignin - Biodegradation Cellulose nanocrystals Bleaching Sabaruddin, Fatimah Athiyah Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
description	The excessive application of chemicals during the NCC production led to harmful chemical discharge that can damage the environment. The process of NCC production can be shorten by excluding the bleaching process and retain partial of lignin within NCC. Lignin was found to be high in thermal stability as it was able to withstand high temperature up to 900 ˚C. Lignin also possess polar and non-polar groups in its chain network which make lignin as good compatibilizer. The implication of lignin in NCC surface has been reported, however its effect on the nanocomposites has not been discussed yet. Hence, if lignin can be retained in NCC and posing no significant adverse effect on the composites, it would give a new perspective in the NCC application. Therefore, in this study, NCC from KC was produced through the soda-AQ pulping process and the lignin content in NCC were varied via different sequence of bleaching. Four different pulps were produced from the bleaching process denoted as UB (unbleached pulps), B1 (bleached up to stage D1), B2 (bleached up to stage D2), and B3 (bleached up to stage D3). All pulps were proceeded with acid hydrolysis treatment to produce the NCCs. All NCCs were analysed having different lignin content which confirmed via chemical analysis and kappa number test. The thermal analysis shows that, the NCC of high lignin content was not able to resist early thermal degradation temperature but was able to withstand a temperature up to 700 ℃ with highest amount of residual char. The NCCs (0.5 and 1 wt. %) then were incorporated within kenaf core reinforced polypropylene (PP/KC) composites with addition of 1 wt % of maleic anhydride grafted polypropylene (MAPP) and its effect on physical, chemical, mechanical, and thermal properties were determined. Overall, the presence of lignin in NCC help to improve the thermal stability of the nanocomposites with marginal effect on the mechanical properties. Furthermore, post alkaline treatment were done upon NCC having different bleaching condition to remove the remaining sulphates as by-product of acid hydrolysis process. However, post alkaline treatment were analysed to be unnecessary for unbleached NCC as it did not give any significant effect to the properties of the NCC and the nanocomposites.
format	Thesis
qualification_level	Doctorate
author	Sabaruddin, Fatimah Athiyah
author_facet	Sabaruddin, Fatimah Athiyah
author_sort	Sabaruddin, Fatimah Athiyah
title	Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
title_short	Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
title_full	Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
title_fullStr	Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
title_full_unstemmed	Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
title_sort	effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites
granting_institution	Universiti Putra Malaysia
publishDate	2019
url	http://psasir.upm.edu.my/id/eprint/79346/1/IPTPH%202019%2010%20ir.pdf
_version_	1747813317301239808

Effects of lignin in nanocrystalline cellulose on mechanical, morphological and thermal properties of kenaf core-reinforced polypropylene composites

Similar Items