Development of encapsulated Trichoderma harzianum UPM40 against Sclerotium rolfsii on chili plant
Trichoderma as a biological control agent is widely used in sustainable agriculture. Commercialisation of this product in large scale with suitable formulation is still remains a problem especially to ensure the viability and efficiency of the formulation upon app...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2018
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/84109/1/IPTSM%202019%2011%20-%20ir.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Trichoderma as a biological control agent is widely used in sustainable agriculture.
Commercialisation of this product in large scale with suitable formulation is still
remains a problem especially to ensure the viability and efficiency of the formulation upon
application in the field. Encapsulation method has emerged as sophisticated technique to
develop the formulation of biological control agents. Encapsulation is the process of
entrapping an active ingredient to shield it from adverse environmental conditions. Encapsulation
of biological control agents (BCA) enables the creation of a microenvironment wherein the
viability of the cells is maintained for storage, controlled release, and easy delivery.
Encapsulation technique using extrusion method was used to prepare Trichoderma harzianum UPM40
beads. Based on the physical characterisation, a formulation with 2% (w/v) alginate, 1% (w/v)
montmorillonite clay (MMT), and 5% (w/v) starch was able to produce T. harzianum UPM40
beads. This formulation produced almost perfectly shaped beads with SF
0.041 ± 0.006. It also offered a good swelling ability (62.11%) and less shrinkage
(48.48%) during the drying process. Chemical characterization using the Fourier Transform
Infrared Spectroscopy (FTIR) showed the interaction between the functional groups of
alginate, MMT, and starch in the alginate- MMT-starch beads. It was shown by the shifting
characteristic peaks of COO⁻ from starch at 1602 to 1610 cm⁻¹. Next C-O-C of alginate shifted from
1024 to 1002 cm⁻¹. Lastly, Si-O bending of MMT shifted from 405 to 453 cm⁻¹.
Thermogravimetric analysis (TGA) showed an improvement in the thermal stability of the
alginate-MMT-starch compared to alginate-MMT beads. X-ray Diffraction Analysis (XRD) shows
the intercalation and exfoliation between starch and MMT. Peak for starch at 2θ° (15.06°) was
shifting to 2θ° (16.64°) while peak at 2θ° (8.8°) for MMT was disappear in
alginate-MMT-starch. Scanning electron microscopy (SEM) revealed a homogeneous distribution of MMT
and starch particles throughout the alginate linkage. The surface area and pore diameter were 4.46 m²/g and 38.2 Å, respectively. Thus, T. harzianum
UPM40 was successfully encapsulated in the alginate–MMT–starch beads. Storage analysis of the
encapsulated T. harzianum UPM40 showed that low storage temperature (5 °C) was
significantly better (p < 0.05) compared to at room temperature (30 °C). At low temperature,
T. harzianum UPM40 beads maintained its viability of 6.59 log cfu/g up to seven months. The
T. harzianum UPM40 beads were tested as a biological control agent against a
soil-borne pathogen, S. rolfsii. In a dual culture, T. harzianum UPM40
displayed strong antagonistic activity against S. rolfsii. The percentage of inhibition
of radial growth (PIRG) was 58.12%. Efficacy test of T. harzianum UPM40 for suppressing
soil-borne diseases caused by S. rolfsii was conducted on chilli plants. Disease assessment results
showed significant differences in disease incidence and disease severity index. T.
harzianum UPM40 beads suppressed S. rolfsii with disease reduction of DI at 88.46% and
DSI at
72.80%. |
|---|