Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)

Electrochemical sensor for the detection of arsenic(III) has been successfully developed based on nanoparticles modified screen printed carbon electrode (SPCE). In this research, silica nanoparticles (SiNPs) and gold nanoparticles (AuNPs) were used as a modifier to enhance...

Full description

Saved in:

Bibliographic Details
Main Author:	Ismail, Suhainie
Format:	Thesis
Language:	English
Published:	2017
Subjects:	Nanocomposites (Materials) Electrodes Electrochemical sensors
Online Access:	http://psasir.upm.edu.my/id/eprint/90767/1/ITMA%202019%2012%20-%20ir.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-upm-ir.90767
record_format	uketd_dc
spelling	my-upm-ir.907672021-09-21T13:47:19Z Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III) 2017-11 Ismail, Suhainie Electrochemical sensor for the detection of arsenic(III) has been successfully developed based on nanoparticles modified screen printed carbon electrode (SPCE). In this research, silica nanoparticles (SiNPs) and gold nanoparticles (AuNPs) were used as a modifier to enhance the performance of disposable screen printed carbon electrode. The electrocatalytic responses of the SiNPs and SiNPs/AuNPs modified electrode for the detection of As(III) were measured using cyclic voltammetry (CV) and linear sweep anodic stripping voltammetry (LSASV). The screen printed carbon electrode was modified by drop casting the nanoparticles onto the working electrode. There are two types of modified electrode were developed for detection and quantification of As(III) ions. Firstly, SiNPs/SPCE electrode was prepared by casting the SiNPs onto the SPCE surface. Meanwhile, AuNPs/SiNPs/SPCE electrode was prepared by casting the SiNPs onto the working electrode, and then layered with 3- mercaptopropionic acid (MPA) followed by attachment of AuNPs. Both modified electrode, SiNPs/SPCE and AuNPs/SiNPs/SPCE were then applied for As(III) detection. Electrochemical studies using LSASV performed with SiNPs/SPCE and AuNPs/SiNPs/SPCE were found to give a better response through the optimization of numerous analytical parameters. The detection of As(III) using SiNPs/SPCE showed a linear response towards different concentration of As(III) and linear calibration curve with R2 = 0.9702 was obtained. The detection limit of 5.64 µg L-1 was achieved by applying deposition potential of - 0.5 V and deposition time of 120 s. Meanwhile, the detection of As(III) using AuNPs/SiNPs/SPCE gave a linear response towards different concentration of As(III) and linear calibration curve with R2 = 0.9975 was obtained. The detection limit of 1.4 µg L-1 was achieved by applying deposition potential of - 0.4 V and deposition time of 120 s. The modified SPCE was characterized using Field Emission Scanning Electron Microscope (FESEM), Transmission Electron Microscope (TEM), and Energy Dispersive X-ray (EDX) respectively. The proposed methods showed good selectivity of target analyte even in the presence of some foreign ions. Furthermore, the developed sensors; SiNPs/SPCE and AuNPs/SiNPs/SPCE showed good reproducibility for six measurements where the RSD values of 5.72 % and 4.52 % were obtained, respectively. Nanocomposites (Materials) Electrodes Electrochemical sensors 2017-11 Thesis http://psasir.upm.edu.my/id/eprint/90767/ http://psasir.upm.edu.my/id/eprint/90767/1/ITMA%202019%2012%20-%20ir.pdf text en public masters Universiti Putra Malaysia Nanocomposites (Materials) Electrodes Electrochemical sensors Yusof, Nor Azah
institution	Universiti Putra Malaysia
collection	PSAS Institutional Repository
language	English
advisor	Yusof, Nor Azah
topic	Nanocomposites (Materials) Electrodes Electrochemical sensors
spellingShingle	Nanocomposites (Materials) Electrodes Electrochemical sensors Ismail, Suhainie Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)
description	Electrochemical sensor for the detection of arsenic(III) has been successfully developed based on nanoparticles modified screen printed carbon electrode (SPCE). In this research, silica nanoparticles (SiNPs) and gold nanoparticles (AuNPs) were used as a modifier to enhance the performance of disposable screen printed carbon electrode. The electrocatalytic responses of the SiNPs and SiNPs/AuNPs modified electrode for the detection of As(III) were measured using cyclic voltammetry (CV) and linear sweep anodic stripping voltammetry (LSASV). The screen printed carbon electrode was modified by drop casting the nanoparticles onto the working electrode. There are two types of modified electrode were developed for detection and quantification of As(III) ions. Firstly, SiNPs/SPCE electrode was prepared by casting the SiNPs onto the SPCE surface. Meanwhile, AuNPs/SiNPs/SPCE electrode was prepared by casting the SiNPs onto the working electrode, and then layered with 3- mercaptopropionic acid (MPA) followed by attachment of AuNPs. Both modified electrode, SiNPs/SPCE and AuNPs/SiNPs/SPCE were then applied for As(III) detection. Electrochemical studies using LSASV performed with SiNPs/SPCE and AuNPs/SiNPs/SPCE were found to give a better response through the optimization of numerous analytical parameters. The detection of As(III) using SiNPs/SPCE showed a linear response towards different concentration of As(III) and linear calibration curve with R2 = 0.9702 was obtained. The detection limit of 5.64 µg L-1 was achieved by applying deposition potential of - 0.5 V and deposition time of 120 s. Meanwhile, the detection of As(III) using AuNPs/SiNPs/SPCE gave a linear response towards different concentration of As(III) and linear calibration curve with R2 = 0.9975 was obtained. The detection limit of 1.4 µg L-1 was achieved by applying deposition potential of - 0.4 V and deposition time of 120 s. The modified SPCE was characterized using Field Emission Scanning Electron Microscope (FESEM), Transmission Electron Microscope (TEM), and Energy Dispersive X-ray (EDX) respectively. The proposed methods showed good selectivity of target analyte even in the presence of some foreign ions. Furthermore, the developed sensors; SiNPs/SPCE and AuNPs/SiNPs/SPCE showed good reproducibility for six measurements where the RSD values of 5.72 % and 4.52 % were obtained, respectively.
format	Thesis
qualification_level	Master's degree
author	Ismail, Suhainie
author_facet	Ismail, Suhainie
author_sort	Ismail, Suhainie
title	Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)
title_short	Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)
title_full	Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)
title_fullStr	Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)
title_full_unstemmed	Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)
title_sort	development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (iii)
granting_institution	Universiti Putra Malaysia
publishDate	2017
url	http://psasir.upm.edu.my/id/eprint/90767/1/ITMA%202019%2012%20-%20ir.pdf
_version_	1747813654951100416

Development of electrochemical sensor based on silica and silica/gold nanoparticle electrode for detection of arsenic (III)

Similar Items