Magnetoresistance of CuCoNi, CuCo and AlFeNi Granular Thin Films Prepared by RF Magnetron Sputtering
In this project, a series of Cu-based and AI-based granular thin films have been prepared using the RF magnetron sputtering system. The effect of the temperature, magnetic field and annealing temperature on the magnetoresisatnce (MR.) of the samples prepared has been discussed. It has been demons...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English |
| 出版: |
2002
|
| 主題: | |
| 在線閱讀: | http://psasir.upm.edu.my/id/eprint/9469/1/FSAS_2002_26.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | In this project, a series of Cu-based and AI-based granular thin films have
been prepared using the RF magnetron sputtering system. The effect of the
temperature, magnetic field and annealing temperature on the magnetoresisatnce
(MR.) of the samples prepared has been discussed. It has been demonstrated that the
MR is composition, thickness and temperature dependent.
For Cu-based sample which has been prepared under ambient
temperature, the highest MR of 1.35% is 'observed for sample CU80.46CO19.54 (CC6).
The samples with different compositions of magnetic entities show the different
optimum thickness that would give the highest MR. The samples CU72.41CO19.62Ni7.97
and CU75.63CO19.56N4.51 have the maximum MR when the deposition time is 80
minutes whereas for sample CU8O.46CO19.54, the maximum occurs when the deposition
is 60 minutes.Upon annealing, the MR of samples also changes. In this study, all of the
Cu-based samples prepared at ambient temperature have been annealed at the
temperature of 300°C, 350°C, 400°C, 450°C for 10 minutes in the argon
environment. Among the samples, CU80.46CO19.54 shows the highest MR of 1.8%
when it is annealed at 450°C. |
|---|