Boron removal from scheduled waste leachate using hybrid adsorption-membrane system augmented with TiO₂ nanoparticles
Landfilling is the most widely adopted waste disposal technique in most countries across the globe due to its simplicity among other waste disposal methods. However, the production of extremely polluted leachate containing boron from landfill has caused a great deal of concern due to high conc...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2021
|
| Subjects: | |
| Online Access: | http://psasir.upm.edu.my/id/eprint/97868/1/FK%202021%2048%20UPMIR.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Landfilling is the most widely adopted waste disposal technique in most countries across
the globe due to its simplicity among other waste disposal methods. However, the
production of extremely polluted leachate containing boron from landfill has caused a
great deal of concern due to high concentration which is toxic and harmful to the
environment. Several treatment technologies including, adsorption, electrocoagulation,
chemical coagulation, chemical precipitation and membrane have been reported in
eliminating boron from a generated effluent before discharge. However, the application
of these methods is being limited by some drawbacks. Low adsorption ability, sludge
generation, high chemical costs, and regular membrane fouling during application are
just a few of the most visible disadvantages. On this note, the current study synthesizes
magnetite (Fe3O4) nanoparticles using high energy ball milling (HEBM) technique. The
Nano-Fe3O4 sorbents were characterized based on scanning electron microscopy (SEM)
structure, elemental composition (EDX), surface area analysis (BET), crystallinity
(XRD), and functional group analysis (FTIR). The resultant sorbent was coated onto a
plastic ball using epoxy resin. The nano-magnetite has multifunctional properties such
as superior superparamagnetism, a larger surface area, and is non-toxic. Despite the
adsorption ability of Fe3O4, there is little information on its use in removing boron from
scheduled waste leachate. Optimization on the application of the sorbent was conducted
using the response surface methodology (RSM) to determine the optimum dosage, pH,
and contact time for boron removal. Based on the optimization studies, the plastic coated
sorbent was applied to the hybrid system comprising of three compartments, namely
adsorption, settling, and membrane compartment. Initially, at the adsorption section of
the hybrid system, the leachate was subjected adsorption process for 250 minutes, using
nano-magnetite coated onto the plastic ball as a sorbent. The remedied effluent was
examined, and a considerable performance was noticed in the removal efficiencies of
boron, turbidity, copper, and zinc with 74.39 %, 77.26%, 94.21%, and 89.62% at 250
minutes contact time, respectively. Though, the (plastic ball coated sorbent) was able to
achieve 74.39% boron removal and 2.2 mg/L concentration. However, this concentration
is still above the WHO/EU/DOE (0.5-1.0 mg/L) standard limit. Application of further treatment process became imperative to meet the standard discharge limit. On this note,
the PBS treated effluent was transferred to the membrane compartment for further
polishing. A nano TiO2 was incorporated into the PVDF-PVD dope to improve the
hydrophilicity properties and develop a negatively charge zeta potential on the
membrane surface. The formulations encompass different loadings of Nano-TiO2 (0, 0.5,
1.0, 1.5 and 2.0 wt%), and the developed dopes were flipped using phase inversion
techniques. The resultant membranes were characterized. The rejection performance was
evaluated based on the boron removal from the leachate. PVDF-PVP with 1.0 wt%
loading has proven to be the most hydrophilic with 50.01° contact angle alongside with
223.93 L/m2.h and 96.56 L/m2.h permeability flux for pure water and leachate. Despite
the potential of TiO2 nanoparticles to improve its hydrophilic properties, information on
the application of modified hybrid nano PVDF-polyvinyl pyrrolidone (PVP) for boron
separation from SWL remains very scarce. In the wake of the optimum performance of
1.0 wt% TiO2 composite membrane, it was selected and incorporated into the PBS-treated Leachate hybrid system for further polishing. The physicochemical analysis of
the treated SWL by the hybrid system revealed that the boron concentration was reduced
to 2.2 mg/L at the adsorption compartment. Furthermore, the membrane compartment
significantly reduced the boron concentration to 0.43 mg/L, which is far lower than the
discharge limit of 1.0 mg/L stipulated by WHO. Finally, the modified hybrid TiO2
membrane has demonstrated to be effective in relegating boron and other contaminants
from schedule waste leachate. |
|---|