Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying

Fresh cantaloupe is highly perishable and has a short shelf life. Therefore, drying is used to preserve the quality of cantaloupe fruit in the form of powder that is stable over a longer storage period. The objectives of this research were (i) to evaluate the effect of Arabic gum concentration on...

Full description

Saved in:
Bibliographic Details
Main Author: Tan, Suet Lin
Format: Thesis
Language:English
Published: 2020
Subjects:
Online Access:http://psasir.upm.edu.my/id/eprint/98236/1/FSTM%202021%2016%20-%20IR.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-upm-ir.98236
record_format uketd_dc
spelling my-upm-ir.982362022-08-02T02:39:09Z Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying 2020-07 Tan, Suet Lin Fresh cantaloupe is highly perishable and has a short shelf life. Therefore, drying is used to preserve the quality of cantaloupe fruit in the form of powder that is stable over a longer storage period. The objectives of this research were (i) to evaluate the effect of Arabic gum concentration on the foam properties, drying curve and physicochemical properties of foam mat dried cantaloupe powder, (ii) to evaluate the effect of Arabic gum concentration on physicochemical properties of spray dried cantaloupe powder, (iii) to determine the storage stability of foam mat dried and spray dried cantaloupe powder at room temperature (25 ± 2 °C, 50-70% RH) and accelerated condition (38 ± 2 °C, 90 ± 2% RH) and (iv) to determine the rheological properties of cake icing incorporated with foam mat dried and spray dried cantaloupe powder. Cantaloupe puree (with pulp) was foam mat dried (FMD) using Arabic gum (AG) at different concentrations (0-15%) in cabinet dryer at 55 °C with 3 mm foam thickness. The results showed that cantaloupe pulp with 10% AG gave better foam properties. Page model fitted well the drying curve of FMD of cantaloupe. FMD cantaloupe powder with 10% AG showed better flowability and lower moisture content, hygroscopicity and cohesiveness. For spray drying, cantaloupe juice (without pulp) was dried with AG concentrations (0- 15%) at inlet temperature at 170 °C and outlet temperature at 90 °C. Spray dried (SD) cantaloupe powder produced with 10% AG exhibited the best quality in terms of moisture content, hygroscopicity, hue, water solubility index and total carotenoid content. Therefore, FMD and SD cantaloupe powders with 10% AG were chosen for storage study and application in cake icing. After 6 months of storage, FMD and SD cantaloupe powders were safe to be consumed as the total plate count, yeast and mould and Bacillus cereus had less than 4.40 and 3.38 log CFU/ml, respectively. The degradation of carotenoid content of cantaloupe powders followed first order reaction. A rheological test was done on the cake icing incorporated with 10% AG of FMD and SD cantaloupe powder in the temperature range of 15 to 35 °C. Cake icing incorporated with cantaloupe powders fitted the Power law model and the flow behaviour index (n) of the icings were between 0.104 and 0.156 showed no significant difference (p > 0.05) with the control sample. The icing incorporated with FMD and SD cantaloupe powder showed higher b* value compared to the control sample. FMD and SD cantaloupe powder can be used as a natural colourant and are suitable for confectionery products such as cake icing. The data in this study is useful in food product development and the use of AG could provide more information in foam mat drying using AG as carrier agent. Muskmelon - Case studies Spray drying 2020-07 Thesis http://psasir.upm.edu.my/id/eprint/98236/ http://psasir.upm.edu.my/id/eprint/98236/1/FSTM%202021%2016%20-%20IR.pdf text en public masters Universiti Putra Malaysia Muskmelon - Case studies Spray drying Sulaiman, Rabiha
institution Universiti Putra Malaysia
collection PSAS Institutional Repository
language English
advisor Sulaiman, Rabiha
topic Muskmelon - Case studies
Spray drying

spellingShingle Muskmelon - Case studies
Spray drying

Tan, Suet Lin
Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying
description Fresh cantaloupe is highly perishable and has a short shelf life. Therefore, drying is used to preserve the quality of cantaloupe fruit in the form of powder that is stable over a longer storage period. The objectives of this research were (i) to evaluate the effect of Arabic gum concentration on the foam properties, drying curve and physicochemical properties of foam mat dried cantaloupe powder, (ii) to evaluate the effect of Arabic gum concentration on physicochemical properties of spray dried cantaloupe powder, (iii) to determine the storage stability of foam mat dried and spray dried cantaloupe powder at room temperature (25 ± 2 °C, 50-70% RH) and accelerated condition (38 ± 2 °C, 90 ± 2% RH) and (iv) to determine the rheological properties of cake icing incorporated with foam mat dried and spray dried cantaloupe powder. Cantaloupe puree (with pulp) was foam mat dried (FMD) using Arabic gum (AG) at different concentrations (0-15%) in cabinet dryer at 55 °C with 3 mm foam thickness. The results showed that cantaloupe pulp with 10% AG gave better foam properties. Page model fitted well the drying curve of FMD of cantaloupe. FMD cantaloupe powder with 10% AG showed better flowability and lower moisture content, hygroscopicity and cohesiveness. For spray drying, cantaloupe juice (without pulp) was dried with AG concentrations (0- 15%) at inlet temperature at 170 °C and outlet temperature at 90 °C. Spray dried (SD) cantaloupe powder produced with 10% AG exhibited the best quality in terms of moisture content, hygroscopicity, hue, water solubility index and total carotenoid content. Therefore, FMD and SD cantaloupe powders with 10% AG were chosen for storage study and application in cake icing. After 6 months of storage, FMD and SD cantaloupe powders were safe to be consumed as the total plate count, yeast and mould and Bacillus cereus had less than 4.40 and 3.38 log CFU/ml, respectively. The degradation of carotenoid content of cantaloupe powders followed first order reaction. A rheological test was done on the cake icing incorporated with 10% AG of FMD and SD cantaloupe powder in the temperature range of 15 to 35 °C. Cake icing incorporated with cantaloupe powders fitted the Power law model and the flow behaviour index (n) of the icings were between 0.104 and 0.156 showed no significant difference (p > 0.05) with the control sample. The icing incorporated with FMD and SD cantaloupe powder showed higher b* value compared to the control sample. FMD and SD cantaloupe powder can be used as a natural colourant and are suitable for confectionery products such as cake icing. The data in this study is useful in food product development and the use of AG could provide more information in foam mat drying using AG as carrier agent.
format Thesis
qualification_level Master's degree
author Tan, Suet Lin
author_facet Tan, Suet Lin
author_sort Tan, Suet Lin
title Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying
title_short Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying
title_full Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying
title_fullStr Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying
title_full_unstemmed Preparation and characterization of cantaloupe (Cucumis melo L. reticulatus cv. Glamour) fruit powder using foam mat drying and spray drying
title_sort preparation and characterization of cantaloupe (cucumis melo l. reticulatus cv. glamour) fruit powder using foam mat drying and spray drying
granting_institution Universiti Putra Malaysia
publishDate 2020
url http://psasir.upm.edu.my/id/eprint/98236/1/FSTM%202021%2016%20-%20IR.pdf
_version_ 1747813851634597888