Lna Ic Design For Cognitive Radio Implementation
This thesis presents a wideband inductorless three-stage common source (CS) low noise amplifier (LNA) with negative feedback for cognitive radio communication applications covering the range of 300 MHz to 10 GHz. Designed in Global Foundries’ 0.13 um CMOS process and through post-layout simulations...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English |
| 出版: |
2013
|
| 主題: | |
| 在線閱讀: | http://eprints.usm.my/40921/1/CHEONG_CHEE_HAN_24_pages.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | This thesis presents a wideband inductorless three-stage common source (CS) low noise amplifier (LNA) with negative feedback for cognitive radio communication applications covering the range of 300 MHz to 10 GHz. Designed in Global Foundries’ 0.13 um CMOS process and through post-layout simulations over the covered band, the minimum and maximum voltage gain is 10 dB and 12.1 dB respectively whereas noise figure of 3.9 to 5.1 dB. S11 < -8.5 dB for the covered band and S11 < -10 dB is achieved up to 8.7 GHz. IIP3 achieves a minimum of -0.5dBm and maximum of 0.8 dBm at pre-layout simulations. The power consumption is 36 mW at 1.2 V. The LNA occupies an area of 26 μm × 46 μm excluding pads and 672 μm × 233 μm with pads. |
|---|