Parallel Implementation Of Field Visualizations With High Order Tetrahedral Finite Elements

Parallel Implementation Of Field Visualizations With High Order Tetrahedral Finite Elements

In the adaptive finite element method (AFEM), high order finite elements are usually used in the computations. In three dimensional simulations, post-processing poses considerable challenge since available data visualization software programs do not accommodate such a high order visualization—common...

Saved in:

書目詳細資料
主要作者:	Ishak, Mohammad Hafifi Hafiz
格式:	Thesis
語言:	English
出版:	2013
主題:	TJ1-1570 Mechanical engineering and machinery
在線閱讀:	http://eprints.usm.my/44040/1/Mohammad%20Hafifi%20Hafiz%20Bin%20Ishak24.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Finite Element Analysis Of Composite Ballistics Helmet Subjected To High Velocity Impact.
由: Othman, Rozaini
出版: (2009)

Finite element computation of linearized thermoelectric effectswith p-adaptivity.
由: Tan, Yi Fung
出版: (2010)

The Finite Element Stress Analysis Of Oblique Pressure Vessel Nozzles
由: Yau , Yat Huang
出版: (1995)

The Hp-Adaptive Finite Element Method For Three Dimensional Multiphysics
由: Kamaludin, Siti Sarah
出版: (2014)

Study On The Accuracy Of Squeeze Film Damping Calculation With Finite Element Analysis
由: Harun, Muhammad Syakir
出版: (2013)

Analysis Of The Effect Of Roundness On Drum Brake Squeal Using The Finite Element Method
由: Yusuf, Zainal Nazri Mohd
出版: (2009)

An Hp-Adaptive Finite Element Procedure For Fluid-Structure Interaction In Fully Eulerian Framework
由: Abas, Mohamad Aizat
出版: (2013)

Crack analysis using extended finite element method with virtual crack closure technique
由: Wong, Ee Fun
出版: (2016)

A Study On The Effect Of Out-Of-Roundness Of Drum Brake Rotor On The Braking Force Using The Finite Element Method.
由: Abdul Hamid, Muhammad Najib
出版: (2007)

Crack Analysis Using Extended Finite Element Method With Virtual Crack Closure Technique
由: Wong , Ee Fun
出版: (2016)

Study Of The Carbon Dioxide (Co2) Laser Inert Gas Cutting On Inconel 718 Using Empirical Approach And Finite Element Analysis
由: Nyon , Ken Yoong
出版: (2011)

Comparison Of Parallel Kanban-Base Stock System To Control Multi-Product Multi-Stage Production With Rework Through Simulation
由: Mustafa, Shaliza Azreen
出版: (2016)

Hybrid Cfd-Nnarx Modelling Of Single Mrf Valve For Visual Servoing.
由: Abu Bakar, Muhamad Husaini
出版: (2017)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
由: Karh Heng, Leong
出版: (2017)

Comparison of Parallel Kanban-Base Stock System to Control Multi-Product Multi-Stage Production with Rework Through Simulation
由: Mustafa, Shaliza Azreen
出版: (2016)

Finite Volume Based Numerical Investigation On The Effects Of Internal Cooling And Film Cooling On The Thermal Performance Of Gas Turbine Blades
由: Shaker, Sufian Farid
出版: (2010)

Model For Decision Making In Implementing Process Imrpovement
由: Low, Shye Nee
出版: (2014)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
由: Leong, Karh Heng
出版: (2017)

Implementation of composite bar and beam element into a commercial finite element code
由: Shahani , Pouria
出版: (2010)

Experimental And Numerical Investigation For Cooling Performance Of High Power Light Emitting Diode (Led) Arrays Using Heat Sink
由: Mohamad, Muhammad Sofwan
出版: (2012)

Model Development Of A Conwip System For Production Control In Multi-Stage Multiproduct Manufacturing Environments Consisting Of High-Runner And Low-Runner Product Families
由: Prakash, Joshua Jaya
出版: (2013)

A Model For The Fuzzy Front End Of New Product Development Process
由: Abd Rahman, Md Nizam
出版: (2016)

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
由: Haghighi, Hamidreza Shahabi
出版: (2008)

Pembangunan Sistem Robot Menggunakan Kaedah Kejuruteraan Balikan
由: Mokhtar, Norsihan
出版: (2000)

Total Productive Maintenance (Tpm) And Socio· Technical Aspects From Malaysian Manufacturing Industries Perspective
由: Mohd Shalahim, Nurul Shahida
出版: (2006)

Model Development Of Single Unit Machine Capacity Measure For Production Planning And Control
由: Ong , Yung Chieh
出版: (2009)

Development Of Decision Model For Maintenance Analysis Of Non-Repairable Component By Considering The External Factor
由: Ahmad, Rosmaini
出版: (2007)

Integrated Approach For Improving Product Design
由: Mahmud Rizwan, Mosaddeque
出版: (2002)

Torrefaction Of Wood Pellets Using Heat From The Producer Gas
由: Anuar, Muhamad Shukri
出版: (2015)

Numerical Investigation Of Heat And Mass Transfer In Porous Medium Fixed With Various Geometries
由: Magami, Irfan Anjum Badruddin
出版: (2006)

Dither Effect Of Drum Brake Squeal
由: Teoh , Choe Yung
出版: (2015)

Investigation of brake squeal/self induced vibrations.
由: Mohammed, Ammar Abdul Majeed Yousif
出版: (2011)

Effect Of Ni3ti Formation On The Oxidation Kinetics Of Niti Shape Memory Alloys
由: Nawawi, Nazihah
出版: (2014)

Effect Of Water Injection Inside A Double Walled Throatless Downdraft Gasifier For Improving Producer Gas Quality
由: Amat Sazali , Shazrul Nizam
出版: (2015)

Modified Neh Heuristic On Makespan Reduction In Permutation Flow Shop Problems
由: Chong, Zheng Ziao
出版: (2015)

Genetic Variations of Nine Malay Subethnic Groups in Peninsular Malaysia Using Autosomal and Y-chromosome Short Tandem Repeats (strs) Analysis
由: Alwi, Aedrianee Reeza
出版: (2016)

Development Of Low Voltage Management Circuit For Low Frequency Vibration Energy Harvesting
由: Alisah, Mohamad Izudin
出版: (2016)

Experimental And Numerical Investigations On The Performance Of Flexible Skin Flapping Wing For Micro Aerial Vehicle Application
由: Yusoff, Hamid
出版: (2013)

Effect Of Winding Angle Due To Internal Pressure In Hybrid Polymer-Metal Cylindrical Composite
由: Abdul Rahim, Khairul Izman
出版: (2014)

Speech Quality Analysis For Two-Ways Radio Subjected To Wind Induced Noise
由: Hashim, Mohd Khairul Rabani
出版: (2015)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group