Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites
The properties of thermoplastic elastomer composites of kenaf bast powder filled HDPE/EPDM were investigated. The composites were prepared by melt blending at 70/30 phr ratio of HDPE/EPDM with different filler loading, e.g; 10, 20, 30 and 40 phr. The properties of kenaf bast powder was investigated...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2014
|
| 主题: | |
| 在线阅读: | http://eprints.usm.my/46034/1/Anis%20Safinas%20Binti%20Md%20Saad24.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| id |
my-usm-ep.46034 |
|---|---|
| record_format |
uketd_dc |
| spelling |
my-usm-ep.460342020-01-30T02:19:11Z Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites 2014-02 Saad, Anis Safinas Md TN1-997 Mining engineering. Metallurgy The properties of thermoplastic elastomer composites of kenaf bast powder filled HDPE/EPDM were investigated. The composites were prepared by melt blending at 70/30 phr ratio of HDPE/EPDM with different filler loading, e.g; 10, 20, 30 and 40 phr. The properties of kenaf bast powder was investigated by using X-ray diffraction (XRD), fourier tranform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Treated kenaf bast powder from combination of chemical treatment of sodium hydroxide (NaOH) and hydrochloric acid (HCl) shows higher crystallinity index (CrI) and thermal stability as compared to untreated kenaf bast powder. The smooth surface of treated kenaf bast powder can be observed from scanning electron microscopy (SEM) after the removal of wax and reduction of lignin and hemicelluloses. From the investigation, the increasing of tensile modulus and water uptake was observed with the increasing of filler loading for all composition of composites. On the other hand, tensile strength and elongation at break decrease with increasing of filler loading. The composites also show the decreasing of thermal stability as the filler loading increased. Treated kenaf bast powder filled HDPE/EPDM composites have higher tensile strength, elongation at break, tensile modulus and low water uptake as compared to untreated kenaf bast powder filled HDPE/EPDM composites. Composites with the addition of maleic anhydride (MAH) during melt blending process shows low thermal stability and water uptake as compared to composites without MAH. 2014-02 Thesis http://eprints.usm.my/46034/ http://eprints.usm.my/46034/1/Anis%20Safinas%20Binti%20Md%20Saad24.pdf application/pdf en public masters Universiti Sains Malaysia Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral |
| institution |
Universiti Sains Malaysia |
| collection |
USM Institutional Repository |
| language |
English |
| topic |
TN1-997 Mining engineering Metallurgy |
| spellingShingle |
TN1-997 Mining engineering Metallurgy Saad, Anis Safinas Md Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites |
| description |
The properties of thermoplastic elastomer composites of kenaf bast powder filled HDPE/EPDM were investigated. The composites were prepared by melt blending at 70/30 phr ratio of HDPE/EPDM with different filler loading, e.g; 10, 20, 30 and 40 phr. The properties of kenaf bast powder was investigated by using X-ray diffraction (XRD), fourier tranform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Treated kenaf bast powder from combination of chemical treatment of sodium hydroxide (NaOH) and hydrochloric acid (HCl) shows higher crystallinity index (CrI) and thermal stability as compared to untreated kenaf bast powder. The smooth surface of treated kenaf bast powder can be observed from scanning electron microscopy (SEM) after the removal of wax and reduction of lignin and hemicelluloses. From the investigation, the increasing of tensile modulus and water uptake was observed with the increasing of filler loading for all composition of composites. On the other hand, tensile strength and elongation at break decrease with increasing of filler loading. The composites also show the decreasing of thermal stability as the filler loading increased. Treated kenaf bast powder filled HDPE/EPDM composites have higher tensile strength, elongation at break, tensile modulus and low water uptake as compared to untreated kenaf bast powder filled HDPE/EPDM composites. Composites with the addition of maleic anhydride (MAH) during melt blending process shows low thermal stability and water uptake as compared to composites without MAH. |
| format |
Thesis |
| qualification_level |
Master's degree |
| author |
Saad, Anis Safinas Md |
| author_facet |
Saad, Anis Safinas Md |
| author_sort |
Saad, Anis Safinas Md |
| title |
Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites |
| title_short |
Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites |
| title_full |
Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites |
| title_fullStr |
Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites |
| title_full_unstemmed |
Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites |
| title_sort |
properties of kenaf bast powder filled high density polyethylene/ethylene propylene diene rubber composites |
| granting_institution |
Universiti Sains Malaysia |
| granting_department |
Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral |
| publishDate |
2014 |
| url |
http://eprints.usm.my/46034/1/Anis%20Safinas%20Binti%20Md%20Saad24.pdf |
| _version_ |
1747821596756672512 |