Two Dimensional (2d) Nanofabrication Process On Quartz Substrate

Two Dimensional (2d) Nanofabrication Process On Quartz Substrate

The fabrication of nanostructures on a quartz substrate has attracted the attention and interest of researchers in recent years due to its wide range of potential applications such as for NEMS/MEMS including BioMEMS/BioNEMS, sensor and fuel cell electrodes. It would create several new potential d...

Saved in:

書目詳細資料
主要作者:	Shamsuddin, Nur Liyana Mohd
格式:	Thesis
語言:	English
出版:	2016
主題:	T Technology TJ1 Mechanical engineering and machinery
在線閱讀:	http://eprints.usm.my/46910/1/Two%20Dimensional%20%282d%29%20Nanofabrication%20Process%20On%20Quartz%20Substrate.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Molecular Mechanics Simulations Of Quartz Etching Process
由: Abdul Manap, Abdul Haadi
出版: (2016)

Synthesis Of Graphene From Alternative Precursors And The Use Of Quartz Plate For Carbon Source Manipulation
由: Kairi, Muhammad Izhar
出版: (2019)

Molecular Mechanics Simulations Of Quartz Etching Process
由: Manap, Abdul Haadi Abdul
出版: (2016)

Development Of Reverse Engineering System For Generating 3d Cad Body From 2d Image_875008757
由: Abdulqawi, Nur Ilham Aminullah
出版: (2017)

Substrate Warpage analysis During Solger Reflow Process
由: Beh, Keh Shin
出版: (2004)

A three dimensional (3D) vision based defect inspection system for gluing application
由: Harun, Mohamad Haniff
出版: (2013)

Laminar nanofluid flow over periodic two dimensional rectangular baffled channels
由: Osia, Seyedel
出版: (2013)

Analysis Of Large In-Plane Displacement And Strain In Rubber Using 2-D Scanner-Based Digital Image Correlation
由: Pang, Goh Ching
出版: (2017)

Low Dimensional Carbon Based Materials For Low Pressure Measurement Application
由: Haniff, Muhammad Aniq Shazni Mohammad
出版: (2015)

Low Dimensional Carbon Based Materials For Low Pressure Measurement Application
由: Haniff, Muhammad Aniq Shazni Mohammad
出版: (2015)

Numerical And Experimental Investigation Of 2D Membrane Airfoil Performance
由: Aziz, Mohd Sharizal Abdul
出版: (2012)

Numerical And Experimental Investigations Of 2d Membrane Airfoil Performance
由: Abdul Aziz, Mohd Sharizal
出版: (2012)

Performance Evaluation Of 3d Printed Hip Protectors
由: Yahaya, Suleiman Abimbola
出版: (2021)

Design And Optimization Of Transition For Air-Filled Substrate Integrated Waveguide
由: Mansor, Nur Hidayah
出版: (2018)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
由: Leong, Karh Heng
出版: (2017)

The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process
由: Juwara, Luqman Nul Hakim
出版: (2016)

Measurement Of Nose Radius And Wear Of Multiple Cutting Tool Inserts From 2-D Scanned Images With Sub-Pixel Edge Detection
由: Lim , Teong Yeong
出版: (2015)

A numerical analysis of two dimensional lid driven cavity flow using cubic interpolated pseudo-particle method
由: Mat Sahat, Idris
出版: (2010)

Recognition of cylindrical features from 2.5D and 3D prismatic model
由: Wan Mohamad , Wan Zulfadli
出版: (2010)

The Hp-Adaptive Finite Element Method For Three Dimensional Multiphysics
由: Kamaludin, Siti Sarah
出版: (2014)

Development Of 3D Microstructures By Using Grayscale Photolithographic Technique
由: Lee , Tze Pin
出版: (2016)

Nickel phosphorus coated substrate micro-defect reduction through chemical mechanical planarization process optimization
由: Mohd. Saleh, Nazim
出版: (2014)

Quantification Of Three-Dimensional Elastic-Plastic Crack-Tip Stress Fields
由: Yusoff, Norwahida
出版: (2018)

Parameters optimization of micro drilling process for CFRP using two flute solid carbide drill bit
由: Md Nasir, Nur Syuhada
出版: (2021)

Effect of in SITU DC and PDC substrate bias cleaning process on TiN coating adhesion in PVD system
由: Hanizam , Hashim
出版: (2013)

Characterization study of silver titanium dioxide (AgTiO2) thin film deposited on various substrates via sol-gel technique
由: Md Radzai, Fatimah
出版: (2012)

A process improvement framework integrating lean methodology and decision tools in manufacturing industry
由: Lim , Shen Chuan
出版: (2015)

Parametric Studies Of Vbo-Oven Cure Process On The Bonding Quality Of Sandwich Panel.
由: Shamsudin, Nor Fadilah
出版: (2015)

Parametric Studies of Vbo-Oven Cure Process On The Bonding Quality Of Sandwich Panel
由: Shamsudin, Nor Fadilah
出版: (2015)

Optimization on milling machining performances of AISI D2 steel using Taguchi method
由: Ismail, Riduan
出版: (2020)

Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields
由: Karh Heng, Leong
出版: (2017)

Control of A 2 D.O.F direct drive robot arm using integral sliding mode control
由: KSM Kader Ibrahim, Babul Salam
出版: (2004)

Modified Statistical Process Control For Short Runs Test And Measurement Process To Reduce False Alarm
由: Koh, Chin Kok
出版: (2018)

Effect of two-step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating
由: Safari, Habiballah
出版: (2010)

The effect of substrate temperature of titanium aluminium nitride coating on titanium alloy (TI-6AL-4V) substrate using PVD method
由: Bahador, Hamid
出版: (2013)

Thermal Performance Of Multi Piezoelectric Fan For Electronic Cooling Application Using 3-D Dynamic Mesh
由: Abdullah @ Harun, Muhammad Khalil
出版: (2012)

Study On The Effect Of Tool Nose Wear On Surface Roughness And Dimensional Deviation Of Workpiece In Finish Turning Using Machine Vision.
由: Haghighi, Hamidreza Shahabi
出版: (2008)

Fabrication and analysis of three dimensional space truss structure / Mohd. Zahir Osman and Saiful Anuar Ahmad Salleh
由: Osman, Mohd. Zahir, et al.
出版: (2002)

Simultaneous Measurement Of 3-D Displacement Components Caused By Crack Growth Using Circular Gratings Moire Fringes And Graphical Analysis
由: Yen, Kin Sam
出版: (2012)

Mechanical properties of HFCVD microcrystaline diamond coated on seeded WC substrate
由: Abdussalam, Mamoon
出版: (2015)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group