Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications

Thermal issue in high power LEDs greatly impacts the performance of LED lighting in terms of its reliability and durability. Thermal interface materials have been recommended to improve heat dissipation as they are capable in conducting heat effectively between heat source and the heat sink. In this...

Full description

Saved in:

Bibliographic Details
Main Author:	Hashim, Nur Hasyimah
Format:	Thesis
Language:	English
Published:	2019
Subjects:	QC1-999 Physics
Online Access:	http://eprints.usm.my/48232/1/Nur%20Hasyimah%20%28920312065412%29-%20MSc%20Thesis%20cut.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-usm-ep.48232
record_format	uketd_dc
spelling	my-usm-ep.482322021-02-02T04:25:36Z Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications 2019-08 Hashim, Nur Hasyimah QC1-999 Physics Thermal issue in high power LEDs greatly impacts the performance of LED lighting in terms of its reliability and durability. Thermal interface materials have been recommended to improve heat dissipation as they are capable in conducting heat effectively between heat source and the heat sink. In this project, zinc oxide (ZnO) and two types metal impregnated ZnO (Copper and Silver) thin films were deposited on Aluminium substrates via sol-gel spin coating technique. The deposition parameters of ZnO thin films such as number of coating cycle and sol-gel concentration were varied to obtain good quality ZnO thin films. After the optimization of ZnO thin films, metal impregnated ZnO thin films were produced at concentration 0.03M, 0.06M, 0.09M. The structural properties of the thin films were investigate using XRD while surface morphology and topology of films were analysed through FESEM and AFM respectively. Thermal performance of the thin films were tested using T3Ster where high power LEDs mounted on coated substrates. X-ray diffraction results showed three major ZnO peak (100, 002, 101) with hexagonal crystal structure for all coated samples. Structural analysis of ZnO thin films showed the increment of crystallite size from 13.80 nm to 34.35 nm while FWHM reduced from 0.631º to 0.254º when number of coating cycles increased from 5 coating cycles to 20 coating cycles. However, as the ZnO concentration increased from 0.5M to 3.0M the crystallite size reduced from 34.35 nm to 29.04nm while FWHM increased from 0.254º to 0.301º. The intensity of ZnO peaks were decreased as both metal introduced into ZnO. 2019-08 Thesis http://eprints.usm.my/48232/ http://eprints.usm.my/48232/1/Nur%20Hasyimah%20%28920312065412%29-%20MSc%20Thesis%20cut.pdf application/pdf en public masters Universiti Sains Malaysia Pusat Pengajian Sains Fizik
institution	Universiti Sains Malaysia
collection	USM Institutional Repository
language	English
topic	QC1-999 Physics
spellingShingle	QC1-999 Physics Hashim, Nur Hasyimah Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications
description	Thermal issue in high power LEDs greatly impacts the performance of LED lighting in terms of its reliability and durability. Thermal interface materials have been recommended to improve heat dissipation as they are capable in conducting heat effectively between heat source and the heat sink. In this project, zinc oxide (ZnO) and two types metal impregnated ZnO (Copper and Silver) thin films were deposited on Aluminium substrates via sol-gel spin coating technique. The deposition parameters of ZnO thin films such as number of coating cycle and sol-gel concentration were varied to obtain good quality ZnO thin films. After the optimization of ZnO thin films, metal impregnated ZnO thin films were produced at concentration 0.03M, 0.06M, 0.09M. The structural properties of the thin films were investigate using XRD while surface morphology and topology of films were analysed through FESEM and AFM respectively. Thermal performance of the thin films were tested using T3Ster where high power LEDs mounted on coated substrates. X-ray diffraction results showed three major ZnO peak (100, 002, 101) with hexagonal crystal structure for all coated samples. Structural analysis of ZnO thin films showed the increment of crystallite size from 13.80 nm to 34.35 nm while FWHM reduced from 0.631º to 0.254º when number of coating cycles increased from 5 coating cycles to 20 coating cycles. However, as the ZnO concentration increased from 0.5M to 3.0M the crystallite size reduced from 34.35 nm to 29.04nm while FWHM increased from 0.254º to 0.301º. The intensity of ZnO peaks were decreased as both metal introduced into ZnO.
format	Thesis
qualification_level	Master's degree
author	Hashim, Nur Hasyimah
author_facet	Hashim, Nur Hasyimah
author_sort	Hashim, Nur Hasyimah
title	Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications
title_short	Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications
title_full	Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications
title_fullStr	Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications
title_full_unstemmed	Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications
title_sort	study of metal impregnated zno thin film as thermal interface for high power led applications
granting_institution	Universiti Sains Malaysia
granting_department	Pusat Pengajian Sains Fizik
publishDate	2019
url	http://eprints.usm.my/48232/1/Nur%20Hasyimah%20%28920312065412%29-%20MSc%20Thesis%20cut.pdf
_version_	1747821906477711360

Study Of Metal Impregnated Zno Thin Film As Thermal Interface For High Power Led Applications

Similar Items