A Study On The Effect Of Out-Of-Roundness Of Drum Brake
Rotor On The Braking Force Using The Finite Element Method.

A Study On The Effect Of Out-Of-Roundness Of Drum Brake Rotor On The Braking Force Using The Finite Element Method.

Rekabentuk kasut depan-kasut mengekor digunakan dengan meluas sebagai brek belakang untuk kereta penumpang dan lori ringan. Gelendong brek biasanya dianggap bulat sepenuhnya dan ini dilaporkan dalam mana-mana hasil kerja yang telah dilakukan oleh penyelidik. The leading-trailing shoe design is us...

Saved in:

書目詳細資料
主要作者:	Abdul Hamid, Muhammad Najib
格式:	Thesis
語言:	English
出版:	2007
主題:	TJ1-1570 Mechanical engineering and machinery
在線閱讀:	http://eprints.usm.my/8964/1/A_STUDY_ON_THE_EFFECT_OF_OUT.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Analysis Of The Effect Of Roundness On Drum Brake Squeal Using The Finite Element Method
由: Yusuf, Zainal Nazri Mohd
出版: (2009)

Analysis of Drum Brake Squeal
由: Abdul Hamid, Muhammad Najib
出版: (2015)

Dither Effect Of Drum Brake Squeal
由: Teoh , Choe Yung
出版: (2015)

Investigation of brake squeal/self induced vibrations.
由: Mohammed, Ammar Abdul Majeed Yousif
出版: (2011)

Finite element (FE) model of brake insulator in reducing brake squeal noise for motorcycles
由: Abdulridha, Mundher Fadhil
出版: (2014)

The Hp-Adaptive Finite Element Method For Three Dimensional Multiphysics
由: Kamaludin, Siti Sarah
出版: (2014)

Modelling and control of an electro-mechanical drum parking brake system for vehicle rollaway prevention
由: Rozaini, Ahmad Humaizi
出版: (2020)

Crack analysis using extended finite element method with virtual crack closure technique
由: Wong, Ee Fun
出版: (2016)

Finite element computation of linearized thermoelectric effectswith p-adaptivity.
由: Tan, Yi Fung
出版: (2010)

The Finite Element Stress Analysis Of Oblique Pressure Vessel Nozzles
由: Yau , Yat Huang
出版: (1995)

Modelling damping element to reduce disc brake squeal
由: Md. Yusop, Noraide
出版: (2013)

Crack Analysis Using Extended Finite Element Method With Virtual Crack Closure Technique
由: Wong , Ee Fun
出版: (2016)

Parallel Implementation Of Field Visualizations With High Order Tetrahedral Finite Elements
由: Ishak, Mohammad Hafifi Hafiz
出版: (2013)

Study On The Accuracy Of Squeeze Film Damping Calculation With Finite Element Analysis
由: Harun, Muhammad Syakir
出版: (2013)

Robust intelligent active force controller for a wagner brake model
由: Al-Mola, Mohammed Hussin Ahmed
出版: (2009)

Finite Element Analysis Of Composite Ballistics Helmet Subjected To High Velocity Impact.
由: Othman, Rozaini
出版: (2009)

An Hp-Adaptive Finite Element Procedure For Fluid-Structure Interaction In Fully Eulerian Framework
由: Abas, Mohamad Aizat
出版: (2013)

Study Of The Carbon Dioxide (Co2) Laser Inert Gas Cutting On Inconel 718 Using Empirical Approach And Finite Element Analysis
由: Nyon , Ken Yoong
出版: (2011)

Determination Of Porosity Level Of Out Of Autoclave Carbon Epoxy Advanced Composites Using Ultrasonic C-Scan Pulse-Echo Method
由: Zainal Abidin, Mohd Fadzlee
出版: (2017)

Experimental investigation of brake judder noise
由: Mohammed, Ghaith Jasim
出版: (2014)

Modelling and control of an intelligent antilock braking system
由: Wijaya, Moh. Lutfi
出版: (2005)

Analysis of temperature distribution in disc brakes
由: Mohd Amin, Azriszul
出版: (2007)

Antilock braking control using robust control approach
由: Hamzah, Norhazimi
出版: (2006)

Squeal suppression approaches of a disc brake assembly
由: Saw, Chun Lin
出版: (2009)

Research on skid control system of small electric vehicle : (the effect of regenerative brake control on in-wheel small electric vehicle with anti-lock brake system)
由: Muhammad Izhar, Ishak
出版: (2013)

Disc brake squeal generation during dry and wet conditions
由: Waheed, Muneer Naji
出版: (2014)

Finite Volume Based Numerical Investigation On The Effects Of Internal Cooling And Film Cooling On The Thermal Performance Of Gas Turbine Blades
由: Shaker, Sufian Farid
出版: (2010)

Investigation on electric motor braking control system for electric powered wheelchair
由: Muhammad Asyraf, Shahrom
出版: (2020)

Manufacturing strategy and its implementation for press brake machine manufacturer in Malaysia
由: How , Wei Ming
出版: (2004)

Squealing occurrence of worn brake pads to foreign particles embedment into the friction layers
由: Mat Lazim, Ahmad Razimi
出版: (2017)

Design and development of a brake system using smart materials
由: Johar, Muhammad Akmal
出版: (2007)

A New Cell Formation Method Considering Operation Sequences And Production Volumes
由: Abedini, Panteha
出版: (2013)

Optimizing Of Injection Moulding Process Parameters For Recycled Plastic Material Using Taguchi Method
由: Mehat, Nik Mizamzul
出版: (2010)

CFD Simulation Of Underfill Encapsulation Process In Flip Chip Packaging With Various Dispensing Methods
由: Khor , Chu Yee
出版: (2010)

A Development Of Optimal Buffer Allocation Determination Method For Μ-Unbalanced Unpaced Production Line
由: Ismail, Mohd Shihabudin
出版: (2009)

An Integration Of Taguchi Method And Response Surface Methodology (Rsm) On Injection Moulded Pp Gears For Parameters Optimization
由: Jamaludin, Amirul Aliff
出版: (2015)

A New Hybrid Optimization Method Using Design Of Experiment Together With Artificial Neural Genetic Algorithm
由: Yahaya, Nor Zaiazmin
出版: (2011)

An Integration Of Taguchi Method And Grey Relational Analysis In Optimizing Injection Moulding Processing Parameter Of Recycled Plastic
由: Zakarria, Noor Syuhadah
出版: (2014)

Feasibility Study Of Reprocessed Acrylonitrile Butadiene Styrene (ABS) And Optimization Of Injection Moulding Parameters Via Taguchi Method
由: Ng, Chin Fei
出版: (2011)

Study on effect of abs control system to the vehicle dynamic behavior during braking on various speed and road condition
由: Muhamad Zulhilmi, Ismail
出版: (2021)

Services hosted by the Perpustakaan Sultan Abdul Samad, Universiti Putra Malaysia with Cooperation MySyL Group