Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings

Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings

The rational of this research is to study the effect of quarry dust composition on the properties of nickel-quarry dust (Ni-QD) composite coating on aluminium alloy 6061 (AA6061) substrate. AA6061 is widely used in aircraft industries due to its low density to weight ratio and high strength. As alum...

Full description

Saved in:
Bibliographic Details
Main Author: Azhar, Emmy Nurulazwana
Format: Thesis
Language:English
English
Published: 2018
Subjects:
T Technology (General)
Online Access:http://eprints.utem.edu.my/id/eprint/23976/1/Effect%20Of%20Quarry%20Dust%20Composition%20On%20The%20Properties%20Of%20Nickel-Quarry%20Dust%20Composite%20Coatings.pdf
http://eprints.utem.edu.my/id/eprint/23976/2/Effect%20Of%20Quarry%20Dust%20Composition%20On%20The%20Properties%20Of%20Nickel-Quarry%20Dust%20Composite%20Coatings.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-utem-ep.23976
record_format uketd_dc
institution Universiti Teknikal Malaysia Melaka
collection UTeM Repository
language English
English
advisor Othman, Intan Sharhida
topic T Technology (General)
T Technology (General)
spellingShingle T Technology (General)
T Technology (General)
Azhar, Emmy Nurulazwana
Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
description The rational of this research is to study the effect of quarry dust composition on the properties of nickel-quarry dust (Ni-QD) composite coating on aluminium alloy 6061 (AA6061) substrate. AA6061 is widely used in aircraft industries due to its low density to weight ratio and high strength. As aluminum operates in aggressive environments in atmospheric air, the aluminium must be coated to prevent corrosion. However, aluminum and its alloys have a high affinity to oxygen which means it always be covered with a thin oxide film growing rapidly. Thus, surface pre-treatment should be done before proceed to electrodeposition. The composition of quarry dust in nickel Watt’s bath is varied from 10g/l to 50g/l. The characterization of quarry dust particles and Ni-QD composite coating on AA6061 substrate was characterized using X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM). Ni-QD composite coating also being tested to investigate the wear and hardness properties. From the results, the hardness of Ni-QD composite coating increased by increasing the quarry dust composition. Other than that, Ni-QD composite coatings also showed a good result in wear testing where the average of COF of Ni-QD composite coatings is lower than bare AA6061.
format Thesis
qualification_name Master of Philosophy (M.Phil.)
qualification_level Master's degree
author Azhar, Emmy Nurulazwana
author_facet Azhar, Emmy Nurulazwana
author_sort Azhar, Emmy Nurulazwana
title Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
title_short Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
title_full Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
title_fullStr Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
title_full_unstemmed Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
title_sort effect of quarry dust composition on the properties of nickel-quarry dust composite coatings
granting_institution Universiti Teknikal Malaysia Melaka
granting_department Faculty of Manufacturing Engineering
publishDate 2018
url http://eprints.utem.edu.my/id/eprint/23976/1/Effect%20Of%20Quarry%20Dust%20Composition%20On%20The%20Properties%20Of%20Nickel-Quarry%20Dust%20Composite%20Coatings.pdf
http://eprints.utem.edu.my/id/eprint/23976/2/Effect%20Of%20Quarry%20Dust%20Composition%20On%20The%20Properties%20Of%20Nickel-Quarry%20Dust%20Composite%20Coatings.pdf
_version_ 1747834064445898752
spelling my-utem-ep.239762022-04-06T10:47:27Z Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings 2018 Azhar, Emmy Nurulazwana T Technology (General) TA Engineering (General). Civil engineering (General) The rational of this research is to study the effect of quarry dust composition on the properties of nickel-quarry dust (Ni-QD) composite coating on aluminium alloy 6061 (AA6061) substrate. AA6061 is widely used in aircraft industries due to its low density to weight ratio and high strength. As aluminum operates in aggressive environments in atmospheric air, the aluminium must be coated to prevent corrosion. However, aluminum and its alloys have a high affinity to oxygen which means it always be covered with a thin oxide film growing rapidly. Thus, surface pre-treatment should be done before proceed to electrodeposition. The composition of quarry dust in nickel Watt’s bath is varied from 10g/l to 50g/l. The characterization of quarry dust particles and Ni-QD composite coating on AA6061 substrate was characterized using X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM). Ni-QD composite coating also being tested to investigate the wear and hardness properties. From the results, the hardness of Ni-QD composite coating increased by increasing the quarry dust composition. Other than that, Ni-QD composite coatings also showed a good result in wear testing where the average of COF of Ni-QD composite coatings is lower than bare AA6061. 2018 Thesis http://eprints.utem.edu.my/id/eprint/23976/ http://eprints.utem.edu.my/id/eprint/23976/1/Effect%20Of%20Quarry%20Dust%20Composition%20On%20The%20Properties%20Of%20Nickel-Quarry%20Dust%20Composite%20Coatings.pdf text en public http://eprints.utem.edu.my/id/eprint/23976/2/Effect%20Of%20Quarry%20Dust%20Composition%20On%20The%20Properties%20Of%20Nickel-Quarry%20Dust%20Composite%20Coatings.pdf text en public https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=114789 mphil masters Universiti Teknikal Malaysia Melaka Faculty of Manufacturing Engineering Othman, Intan Sharhida 1. Amadeh, A., Rahimi, A., Farshchian, B. and Moradi, H., 2010. Corrosion Behavior of Pulse Electrodeposited Nanostructure Ni.SiC Composite Coatings. Journal of nanoscience and nanotechnology, 10(8), pp.5383-5388. 2. Andersen, T.N., Kerby, R.C. and O.f.Keefe, T.J., 1985. Control techniques for industrial electrodeposition from aqueous solutions. JOM Journal of the Minerals, Metals and Materials Society, 37(1), pp.36-43. 3. Arghavanian, R., Ahmadi, N.P., Yazdani, S. and Bostani, B., 2012. Investigations on corrosion proceeding path and EIS of Ni.ZrO2 composite coating. Surface Engineering, 28(7), pp.508- 512. 4. Backovi., N., Janc.i., M. and Radonji., L.J., 1979. Study of electroless Ni-P deposition on aluminium. Thin Solid Films, 59(1), pp.1-12. 5. Berry, E.E. and Malhotra, V.M., 1980, March. Fly ash for use in concrete-a critical review. In Journal Proceedings (Vol. 77, No. 2, pp. 59-73). 6. Bibber, J.W., 2009. Zincate-or stannate-free plating of magnesium, aluminum, and titanium. Metal Finishing, 107(7-8), pp.28-30. 7. Blum, W. and Kasper, C., 1935. Structure and properties of nickel deposited at high current densities. Transactions of the Faraday Society, 31, pp.1203-1211. 8. Brittain, C.P., Armstrong, R.W. and Smith, G., 1985. Hall-petch dependence for ultrafine grain size electrodeposited chromium. Scripta metallurgica, 19(1), pp.89-91. 9. Chandler, H. ed., 1999. Hardness testing. ASM international. 10. Chen, C.Y., 2016. Electro-Codeposition of Pigment Particles in Ni-Based Composite Coatings (Doctoral dissertation, University of Toronto (Canada)). 11. Chen, L., Wang, L., Zeng, Z. and Xu, T., 2006. Influence of pulse frequency on the microstructure and wear resistance of electrodeposited Ni.Al2O3 composite coatings. Surface and Coatings Technology, 201(3), pp.599-605. 12. Chen, W.X., Tu, J.P., Wang, L.Y., Gan, H.Y., Xu, Z.D. and Zhang, X.B., 2003. Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon, 41(2), pp.215-222. 13. Chen, W.X., Tu, J.P., Wang, L.Y., Gan, H.Y., Xu, Z.D. and Zhang, X.B., 2003. Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon, 41(2), pp.215-222. 14. Chen, X.H., Cheng, F.Q., Li, S.L., Zhou, L.P. and Li, D.Y., 2002. Electrodeposited nickel composites containing carbon nanotubes. Surface and Coatings Technology, 155(2), pp.274- 278. 15. Chen, Z., Shao, G., Ma, Z., Song, J., Wang, G. and Huang, W., 2015. Preparation of Ni.CeO 2 composite coatings with high catalytic activity for hydrogen evolution reaction. Materials Letters, 160, pp.34-37. 16. Clyne, T.W. and Withers, P.J., 1995. An introduction to metal matrix composites. Cambridge University Press. 17. Davis, J.R. ed., 2000. Corrosion: Understanding the basics. ASM International. 18. Davis, J.R. ed., 2001. Surface engineering for corrosion and wear resistance (No. 751). ASM international. 19. Dennis, J.K. and Such, T.E., 1993. Nickel and chromium plating. Elsevier. 20. Devaneyan, S.P. and Senthilvelan, T., 2014. Electro Co-deposition and characterization of SiC in nickel metal matrix composite coatings on aluminium 6061. Procedia Engineering, 97, pp.1496-1505. 21. Diaz, O.G. and Axinte, D.A., 2017. Towards understanding the cutting and fracture mechanism in Ceramic Matrix Composites. International Journal of Machine Tools and Manufacture, 118, pp.12-25. 22. DiBari, G.A., 1996. Nickel electroplating applications & trends. Plating and surface finishing, 83(10), pp.10-14. 23. Dini, J.W., 1993. The Materials Science of Coatings and Substrates. 24. Dini, J.W., Johnson, H.R. and West, L., 1978. High Temperature Ductility Properties of Electrodeposited Sulfamate Nickel. Plating Surf. Finish., 65(2), pp.36-40. 25. Du, L., Xu, B., Dong, S., Yang, H. and Tu, W., 2004. Study of tribological characteristics and wear mechanism of nano-particle strengthened nickel-based composite coatings under abrasive contaminant lubrication. Wear, 257(9), pp.1058-1063. 26. Eddy, N.O., 2011. Green corrosion chemistry and engineering: opportunities and challenges. John Wiley & Sons. 27. Farzaneh, A., Sarvari, M., Ehteshamzadeh, M. and Mermer, O., 2016. Effect of Zincating bath additives on structural and electrochemical properties of electroless Ni-P coating on AA6061. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 11(11), pp.9676-9686. 28. Feng, Q., Li, T., Teng, H., Zhang, X., Zhang, Y., Liu, C. and Jin, J., 2008. Investigation on the corrosion and oxidation resistance of Ni.Al2O3 nano-composite coatings prepared by sediment co-deposition. Surface and Coatings Technology, 202(17), pp.4137-4144. 29. Fontana, M.G., 2005. Corrosion engineering. Tata McGraw-Hill Education. 30. Georgiza, E., Novakovic, J. and Vassiliou, P., 2013. Characterization and corrosion resistance of duplex electroless Ni-P composite coatings on magnesium alloy. Surface and Coatings Technology, 232, pp.432-439. 31. Golby, J.W., 1981. Electrodeposition on aluminium and its alloys. sea, 10, p.4. 32. Gomes, A., Pereira, I., Fernandez, B. and Pereiro, R., 2011. Electrodeposition of metal matrix nanocomposites: improvement of the chemical characterization techniques. In Advances in nanocomposites-synthesis, characterization and industrial applications. InTech. 33. Gupta, N. and Rohatgi, P.K. eds., 2014. Metal matrix syntactic foams: processing, microstructure, properties and applications. DEStech Publications, Inc. 34. Hafiz, M.H. and Mahdi, B.S., 2007. Surface preparation of aluminium for plating by Zincating. Engineering & Technology, 25(10), pp.1184-1193. 35. Hino, Makoto, Koji Murakami, Yutaka Mitooka, Ken Muraoka, Ryosuke Furukawa, and Teruto Kanadani. "Effect of zincate treatment on adhesion of electroless Ni-P coating onto various aluminum alloys." Materials transactions 50, no. 9 (2009): 2235-2241. 36. Hongmin, K., Zhaoyi, Y. and Ning, Z., 2015. Preparation of Ni-SiC Composite Coating by Electrochemical Deposition. Rare Metal Materials and Engineering, 44(12), pp.2960-2964. 37. Hovestad, A. and Janssen, L.J., 2005. Electroplating of metal matrix composites by codeposition of suspended particles. Modern aspects of electrochemistry, 38, p.475. 38. Hovestad, A. and Janssen, L.J.J., 1995. Electrochemical codeposition of inert particles in a metallic matrix. Journal of Applied Electrochemistry, 25(6), pp.519-527. 39. Hughes, G.D., Smith, S.D., Pande, C.S., Johnson, H.R. and Armstrong, R.W., 1986. Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel. Scripta Metallurgica, 20(1), pp.93-97. 40. Ilangovana, R., Mahendrana, N. and Nagamanib, K., 2008. Strength and durability properties of concrete containing quarry rock dust as fine aggregates. In ARPN Journal of Engineering and Applied science. 41. Jebin, V.D. and Rino, J.J., 2013. Wear behavior of AL6063-alumina metal Matrix composite. 42. Jiang, S.W., Yang, L., Pang, J.N., Lin, H. and Wang, Z.Q., 2016. Electrodeposition of Ni-Al2O3 composite coatings with combined addition of SDS and HPB surfactants. Surface and Coatings Technology, 286, pp.197-205. 43. Jing, G., 2016. Effect of Electrodeposition Method on Ni/SiC Composite Coating. 44. Jones, D.A., 1996. Principles and Preventation of Corrosion, 2nd Englewood Cliffs. 45. Kershman, J.R., 2010. Electrodeposition and speciation study of different transition metal antimonides for application into lithium ion batteries (Doctoral dissertation, Colorado State University). 46. Keshavaram, B.N., Satyanarayana, K.G., Majumdar, B., Rohatgi, P.K. and Dattaguru, B., Studies on fracture and strength behaviour of Al-glass and Al-flyash particulate composites. In ICF6, New Delhi (India) 1984. 47. Landau, U., 1982. Plating.New Prospects for an Old Art. In Electrochemistry in Industry (pp. 215-245). Springer, Boston, MA. 48. Li, L., An, M. and Wu, G., 2006. A new electroless nickel deposition technique to metallise SiC p/Al composites. Surface and Coatings Technology, 200(16), pp.5102-5112. 49. Li, S.M., Zhang, H.R. and Liu, J.H., 2007. Corrosion behavior of aluminum alloy 2024-T3 by 8-hydroxy-quinoline and its derivative in 3.5% chloride solution. Transactions of Nonferrous Metals Society of China, 17(2), pp.318-325. 50. Lindroos, V.K. and Talvitie, M.J., 1995. Recent advances in metal matrix composites. Journal of Materials Processing Technology, 53(1-2), pp.273-284. 51. Low, C.T.J., Wills, R.G.A. and Walsh, F.C., 2006. Electrodeposition of composite coatings containing nanoparticles in a metal deposit. Surface and Coatings Technology, 201(1), pp.371- 383. 52. Makoto, H.I.N.O., Murakami, K., Mitooka, Y., Muraoka, K. and Kanadani, T., 2009. Effects of zincate treatment on adhesion of electroless Ni-P coating onto various aluminum alloys. Transactions of Nonferrous Metals Society of China, 19(4), pp.814-818. 53. Malhotra, V.M., 1989. Fly ash, silica fume, slag, and natural pozzolans in concrete (No. CONF-890607--). Detroit, MI (USA); American Concrete Institute. 54. Martyak, N.M. and Seefeldt, R., 2005. Effects of chloride in acid tin methanesulphonate electrolytes on the deposit thickness, morphologies and compositions. Transactions of the IMF, 83(1), pp.43-50. 55. Miserez, A., Muller, R., Rossoll, A., Weber, L. and Mortensen, A., 2004. Particle reinforced metals of high ceramic content. Materials Science and Engineering: A, 387, pp.822-831. 56. Modi, O. P., Jha, A. K., Dasgupta, R., Das, S., Mondal, D. P., & Yegneswaran, A. H., 2001. Erosion-corrosion-abrasion characteristics in slurry of a zinc based alloy and its composite containing alumina particle dispersoid. Materials science and technology, 17(11), 1444-1450. 57. Monteiro, F.J., Barbosa, M.A., Gabe, D.R. and Ross, D.H., 1988. Surface pretreatments of aluminium for electroplating. Surface and Coatings Technology, 35(3-4), pp.321-331. 58. Mortensen, A., 1991. Interfacial phenomena in the solidification processing of metal matrix composites. Materials Science and Engineering: A, 135, pp.1-11. 59. Naik, T.R., Singh, S.S. and Hossain, M.M., 1994. Permeability of concrete containing large amounts of fly ash. Cement and concrete research, 24(5), pp.913-922. 60. Nartey, V.K., Nanor, J.N. and Klake, R.K., 2012. Effects of quarry activities on some selected communities in the lower Manya Krobo District of the Eastern Region of Ghana. Atmospheric and Climate Sciences, 2(03), p.362. 61. Oduoza, C.F. and Khan, E., 2011. Nickel-Phosphorus Deposition on Pretreated Aluminium Alloys during Immersion in Electroless Nickel Bath. Journal of Materials Science and Engineering. A, 1(4A), p.457. 62. Paloumpa, I., Yfantis, A., Hoffmann, P., Burkov, Y., Yfantis, D. and Schmeiser, D., 2004. Mechanisms to inhibit corrosion of Al alloys by polymeric conversion coatings. Surface and Coatings Technology, 180, pp.308-312. 63. Paloumpa, I., Yfantis, A., Hoffmann, P., Burkov, Y., Yfantis, D. and Schmeiser, D., 2004. Mechanisms to inhibit corrosion of Al alloys by polymeric conversion coatings. Surface and Coatings Technology, 180, pp.308-312. 64. Panagopoulos, C.N. and Georgiou, E.P., 2009. Surface mechanical behaviour of composite Ni.P.fly ash/zincate coated aluminium alloy. Applied Surface Science, 255(13), pp.6499- 6503. 65. Panagopoulos, C.N., Georgiou, E.P., Tsopani, A. and Piperi, L., 2011. Composite Ni.Co.fly ash coatings on 5083 aluminium alloy. Applied Surface Science, 257(11), pp.4769-4773. 66. Parida, G., Chaira, D. and Basu, A., 2013. Ni.ZrO2 Composite Coating by Electro-Co- Deposition. Transactions of the Indian Institute of Metals, 66(1), pp.5-11. 67. Pearson, T. and Wake, S.J., 1997. Improvements in the pretreatment of aluminium as a substrate for electrodeposition. Transactions of the IMF, 75(3), pp.93-97. 68. Pidaparti, R.M. and Rao, A.S., 2008. Analysis of pits induced stresses due to metal corrosion. Corrosion Science, 50(7), pp.1932-1938. 69. Pourbaix, M. 1966. Atlas of electrochemical equilibria in aqueous solutions. Prasad, B. K., 70. Qi, G., Chen, X. and Shao, Z., 2002. Influence of bath chemistry on zincate morphology on aluminum bond pad. Thin solid films, 406(1), pp.204-209. 71. Rajan, T.P.D., Pillai, R.M., Pai, B.C., Satyanarayana, K.G. and Rohatgi, P.K., 2007. Fabrication and characterisation of Al.7Si.0.35 Mg/fly ash metal matrix composites processed by different stir casting routes. Composites Science and Technology, 67(15), pp.3369-3377. 72. Ramesh, C. S., Seshadri, S. K., & Iyer, K. J. L., 1991. A survey of aspects of wear of metals. Indian journal of technology, 29(4), 179-185. 73. Ramesh, C.S. and Seshadri, S.K., 2003. Tribological characteristics of nickel based composite coatings. Wear, 255(7), pp.893-902. 74. Ramesh, C.S., Seshadri, S.K. and Iyer, K.J.L., 1991. Corrosion studies on nickel-silicon nitride composite coatings. Surface Engineering, 7(3), pp.216-220. 75. Ramesh, C.S., Seshadri, S.K. and Iyer, K.J.L., 1991. Wear resistance of nickel-fly ash composite coatings. Wear, 145(1), pp.189-195. 76. Ramesh, C.S., Seshadri, S.K. and Iyer, K.J.L., 1992. A model for wear rates of composite coatings. Wear, 156(2), pp.205-209. 77. Ramesh, C.S., Seshadri, S.K. and Iyer, K.J.L., 1993. Fatigue behaviour of nickel-flyash composite coatings. Journal of materials science letters, 12(10), pp.746-746. 78. Ramesh, M., Karthikeyan, T. and Kumaravel, A., 1970. Effect of Reinforcement of Natural 79. Residue (Quarry Dust) to Enhance the Properties of Aluminium Metal. I Control Pollution, 30(1). 80. Rao, A., Jha, K.N. and Misra, S., 2007. Use of aggregates from recycled construction and demolition waste in concrete. Resources, conservation and Recycling, 50(1), pp.71-81. 81. Reddy, V.V.N., Ramamoorthy, B. and Nair, P.K., 2000. A study on the wear resistance of electroless Ni.P/Diamond composite coatings. Wear, 239(1), pp.111-116. 82. Rockliff, D., 1996. Low-grade quarry products, reclaimed aggregates and inert wastes.Their use in unbound mixtures for road pavements. Waste Management, 16(1), pp.83-85. 83. Rohatgi, P.K., Guo, R.Q., Iksan, H., Borchelt, E.J. and Asthana, R., 1998. Pressure infiltration technique for synthesis of aluminum.fly ash particulate composite. Materials Science and Engineering: A, 244(1), pp.22-30. 84. Rohatgi, P.K., Guo, R.Q., Iksan, H., Borchelt, E.J. and Asthana, R., 1998. Pressure infiltration technique for synthesis of aluminum.fly ash particulate composite. Materials Science and Engineering: A, 244(1), pp.22-30. 85. Rohatgi, P.K., Schultz, B.F., Daoud, A. and Zhang, W.W., 2010. Tribological performance of A206 aluminum alloy containing silica sand particles. Tribology International, 43(1), pp.455- 466. 86. Rudnik, E. and Jucha, T., 2013. Electroless and electrolytic deposition of Co.SiC composite coatings on aluminum. Surface and Coatings Technology, 232, pp.389-395. 87. Safranek, W.H., 1986. The Properties of Electrodeposited Metals and Alloys: a Handbook. American Electroplaters and Surface Finishers Society, 1986,, p.550. 88. Sample, C. and Knapp, B., 1962, January. Physical and mechanical properties of electroformed nickel at elevated and subzero temperatures. In Symposium on Electroforming.Applications, Uses, and Properties of Electroformed Metals. ASTM International. 89. Schlesinger, M., 2000. Electroless deposition of nickel. Modern electroplating, 4, pp.667-684. 90. Schweitzer, P.A., 2009. Fundamentals of corrosion: mechanisms, causes, and preventative methods. CRC Press. 91. Shanmughasundaram, P., Subramanian, R. and Prabhu, G., 2011. Some studies on aluminium. fly ash composites fabricated by two step stir casting method. European journal of scientific research, 63(2), pp.204-218. 92. Shao, I., Vereecken, P.M., Chien, C.L., Searson, P.C. and Cammarata, R.C., 2002. Synthesis and characterization of particle-reinforced Ni/Al2O3 nanocomposites. Journal of materials research, 17(6), pp.1412-1418. 93. Shorowordi, K.M., Haseeb, A.S.M.A. and Celis, J.P., 2006. Tribo-surface characteristics of Al.B 4 C and Al.SiC composites worn under different contact pressures. Wear, 261(5), pp.634-641. 94. Shrestha, N.K., Sakurada, K., Masuko, M. and Saji, T., 2001. Composite coatings of nickel and ceramic particles prepared in two steps. Surface and coatings technology, 140(2), pp.175- 181. 95. Singh, N. and Khanna, K.G., 2010. Effect of Thermal Ageing on Al Alloy Metal Matrix Composite (Doctoral dissertation). 96. Sivakumar, N., Hashim, A.R. and Nadzriah, A.H.S., 2012. Effect of quarry dust addition on the performance of controlled low-strength material made from industrial waste incineration bottom ash. International Journal of Minerals, Metallurgy, and Materials, 19(6), pp.536-541. 97. Smerd, R., Winkler, S., Salisbury, C., Worswick, M., Lloyd, D. and Finn, M., 2005. High strain rate tensile testing of automotive aluminum alloy sheet. International Journal of Impact Engineering, 32(1), pp.541-560. 98. Sridhar, N. and Udaya Bhat, K., 2013. Effect of Deposition Time on the Morphological Features and Corrosion Resistance of Electroless Ni-High P Coatings on Aluminium. Journal of Materials, 2013. 99. Sridharan, A., Soosan, T.G., Jose, B.T. and Abraham, B.M., 2006. Shear strength studies on soil-quarry dust mixtures. Geotechnical and Geological Engineering, 24(5), pp.1163-1179. 100. Sun, W.C., Zhang, P., Zhao, K., Tian, M.M. and Wang, Y., 2015. Effect of graphite concentration on the friction and wear of Ni.Al2O3/graphite composite coatings by a combination of electrophoresis and electrodeposition. Wear, 342, pp.172-180. 101. Szczygie., B. and Ko.odziej, M., 2005. Composite Ni/Al2O3 coatings and their corrosion resistance. Electrochimica Acta, 50(20), pp.4188-4195. 102. Szklarska-Smialowska, Z., 1992. Insight into the pitting corrosion behavior of aluminum alloys. Corrosion science, 33(8), pp.1193-1202. 103. Takacs, D., Sziraki, L., Torok, T.I., Solyom, J., Gacsi, Z. and Gal-Solymos, K., 2007. Effects of pre-treatments on the corrosion properties of electroless Ni.P layers deposited on AlMg2 alloy. Surface and Coatings Technology, 201(8), pp.4526-4535. 104. Teti, R., 2002. Machining of composite materials. CIRP Annals-Manufacturing Technology,51(2), pp.611-634. 105. Triantou, K.I., Pantelis, D.I., Guipont, V. and Jeandin, M., 2015. Microstructure and tribological behavior of copper and composite copper+ alumina cold sprayed coatings for various alumina contents. Wear, 336, pp.96-107. 106. Ul-Hamid, A., Quddus, A., Al-Yousef, F.K., Mohammed, A.I., Saricimen, H. and Al-Hadhrami, 107. L.M., 2010. Microstructure and surface mechanical properties of electrodeposited Ni coating on Al 2014 alloy. Surface and Coatings Technology, 205(7), pp.2023-2030. 108. Vaezi, M.R., Sadrnezhaad, S.K. and Nikzad, L., 2008. Electrodeposition of Ni.SiC nanocomposite coatings and evaluation of wear and corrosion resistance and electroplating characteristics. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 315(1), pp.176-182. 109. Vijayanand, M. and Elansezhian, R., 2014. Effect of Different Pretreatments and Heat Treatment on Wear Properties of Electroless Ni-B Coatings on 6061-T6 Aluminum Alloy. Procedia Engineering, 97, pp.1707-1717. 110. Wainwright, P.J., Cresswell, D.J.F. and Van der Sloot, H.A., 2002. The production of synthetic aggregate from a quarry waste using an innovative style rotary kiln. Waste Management & Research, 20(3), pp.279-289. 111. Wang, W., Hou, F.Y., Wang, H. and Guo, H.T., 2005. Fabrication and characterization of Ni. 112. ZrO 2 composite nano-coatings by pulse electrodeposition. Scripta Materialia, 53(5), pp.613-618. 113. Wesley, W.A. and Carey, J.W., 1939. The electrodeposition of nickel from nickel chloride solutions. Transactions of The Electrochemical Society, 75(1), pp.209-236. 114. Wood, G.C., 1973. Porous anodic films on aluminum. Paper from" Oxides and Oxide Films",,2. 115. Wu, Z., Shen, B. and Liu, L., 2012. Effect of ƒ¿-Al 2 O 3 coatings on the interface of Ni/SiC composites prepared by electrodeposition. Surface and Coatings Technology, 206(14), pp.3173-3178. 116. Yap, S.P., ALENGARAM, U., JUMAAT, M. and FOONG, K., 2013. Waste Materials in Malaysia for Development of Sustainable Concrete: A Review. Electronic Journal of Structural Engineering, 13, p.1. 117. Zhou, Z.F., Yong, P. and Lei, W.X., 2010. Ni nanocomposite films formed by Ni nanowires embedded in Ni matrix using electrodeposition. Transactions of Nonferrous Metals Society of China, 20(4), pp.637-642.

Similar Items