Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication

In this study, acrylonitrile butadiene styrene (ABS) polymer was reinforced with different percentages of kenaf fibres to produce fused filament fabrication (FFF) filaments. The degradation temperature, glass transition temperature (Tg), and melting temperature (Tm) of these newly developed filament...

Full description

Saved in:

Bibliographic Details
Main Author:	Mohd Farhan Han, Syaza Najwa
Format:	Thesis
Language:	English English
Published:	2021
Subjects:	T Technology (General)
Online Access:	http://eprints.utem.edu.my/id/eprint/25413/1/Characterisation%20Of%20Kenaf%20Fibre%20Reinforced%20Acrylonitrile%20Butadiene%20Styrene%20Composites%20For%20Fused%20Filament%20Fabrication.pdf http://eprints.utem.edu.my/id/eprint/25413/2/Characterisation%20Of%20Kenaf%20Fibre%20Reinforced%20Acrylonitrile%20Butadiene%20Styrene%20Composites%20For%20Fused%20Filament%20Fabrication.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-utem-ep.25413
record_format	uketd_dc
institution	Universiti Teknikal Malaysia Melaka
collection	UTeM Repository
language	English English
advisor	Mohammad Taha, Mastura
topic	T Technology (General) T Technology (General)
spellingShingle	T Technology (General) T Technology (General) Mohd Farhan Han, Syaza Najwa Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
description	In this study, acrylonitrile butadiene styrene (ABS) polymer was reinforced with different percentages of kenaf fibres to produce fused filament fabrication (FFF) filaments. The degradation temperature, glass transition temperature (Tg), and melting temperature (Tm) of these newly developed filaments were evaluated via the thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The rheological properties of these filaments were also investigated based on viscosity and shear rate. Then, the FFF technology was used to produce three-dimensional (3-D) printed parts with kenaf fibre-reinforced ABS (K-ABS) polymer composites with different kenaf fibre fractions to investigate the mechanical behaviours of these parts. Tensile and flexural testings were performed on these 3-D printed samples. In general, the degradation temperature of K-ABS polymer composites decreased, as the content of kenaf fibre in K-ABS composites increased. Meanwhile, the Tg and Tm of samples increased when the content of kenaf fibre in K-ABS composites increased from 0% to 5%. However, the further increment of kenaf fibre content from 5% to 10% in K-ABS composite decreased the Tg and Tm of composites. For rheological properties, the viscosity decreased with increasing shear rate, but with no apparent difference observed the viscosities for K-ABS composites with different percentages of kenaf fibre. Tensile strength and tensile modulus of K-ABS polymer composites decreased by 50.5% and 43.8% for K-ABS composites with kenaf content of 0% and 5%, respectively. The increasing content of kenaf fibre from 5% to 10% in K-ABS composites increased the tensile strength by 61.9% and tensile modulus by 49.4%. Flexural strength and flexural modulus decreased by 34.7% and 46.9% in K-ABS composites with kenaf fibre of 0% and 5%, respectively. Further addition of kenaf fibre in K-ABS from 5% to 10% increased the flexural strength and flexural modulus by 23.3% and 47.4%, respectively. The presence of porosity and poor interfacial adhesion between kenaf fibre and ABS matrix, as revealed in failure mode, may have caused the decrease of mechanical properties. Overall, K-ABS composite with 2.5% kenaf fibre was the best materials with better performance in the testing of thermal, rheological and mechanical properties and failure mode analysis. This research successfully demonstrated the capability of K-ABS composites with different kenaf fibre content serving as FFF filaments.
format	Thesis
qualification_name	Master of Philosophy (M.Phil.)
qualification_level	Master's degree
author	Mohd Farhan Han, Syaza Najwa
author_facet	Mohd Farhan Han, Syaza Najwa
author_sort	Mohd Farhan Han, Syaza Najwa
title	Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
title_short	Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
title_full	Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
title_fullStr	Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
title_full_unstemmed	Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication
title_sort	characterisation of kenaf fibre reinforced acrylonitrile butadiene styrene composites for fused filament fabrication
granting_institution	Universiti Teknikal Malaysia Melaka
granting_department	Faculty Of Mechanical Engineering
publishDate	2021
url	http://eprints.utem.edu.my/id/eprint/25413/1/Characterisation%20Of%20Kenaf%20Fibre%20Reinforced%20Acrylonitrile%20Butadiene%20Styrene%20Composites%20For%20Fused%20Filament%20Fabrication.pdf http://eprints.utem.edu.my/id/eprint/25413/2/Characterisation%20Of%20Kenaf%20Fibre%20Reinforced%20Acrylonitrile%20Butadiene%20Styrene%20Composites%20For%20Fused%20Filament%20Fabrication.pdf
_version_	1747834122349314048
spelling	my-utem-ep.254132021-12-07T16:05:30Z Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication 2021 Mohd Farhan Han, Syaza Najwa T Technology (General) TA Engineering (General). Civil engineering (General) In this study, acrylonitrile butadiene styrene (ABS) polymer was reinforced with different percentages of kenaf fibres to produce fused filament fabrication (FFF) filaments. The degradation temperature, glass transition temperature (Tg), and melting temperature (Tm) of these newly developed filaments were evaluated via the thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The rheological properties of these filaments were also investigated based on viscosity and shear rate. Then, the FFF technology was used to produce three-dimensional (3-D) printed parts with kenaf fibre-reinforced ABS (K-ABS) polymer composites with different kenaf fibre fractions to investigate the mechanical behaviours of these parts. Tensile and flexural testings were performed on these 3-D printed samples. In general, the degradation temperature of K-ABS polymer composites decreased, as the content of kenaf fibre in K-ABS composites increased. Meanwhile, the Tg and Tm of samples increased when the content of kenaf fibre in K-ABS composites increased from 0% to 5%. However, the further increment of kenaf fibre content from 5% to 10% in K-ABS composite decreased the Tg and Tm of composites. For rheological properties, the viscosity decreased with increasing shear rate, but with no apparent difference observed the viscosities for K-ABS composites with different percentages of kenaf fibre. Tensile strength and tensile modulus of K-ABS polymer composites decreased by 50.5% and 43.8% for K-ABS composites with kenaf content of 0% and 5%, respectively. The increasing content of kenaf fibre from 5% to 10% in K-ABS composites increased the tensile strength by 61.9% and tensile modulus by 49.4%. Flexural strength and flexural modulus decreased by 34.7% and 46.9% in K-ABS composites with kenaf fibre of 0% and 5%, respectively. Further addition of kenaf fibre in K-ABS from 5% to 10% increased the flexural strength and flexural modulus by 23.3% and 47.4%, respectively. The presence of porosity and poor interfacial adhesion between kenaf fibre and ABS matrix, as revealed in failure mode, may have caused the decrease of mechanical properties. Overall, K-ABS composite with 2.5% kenaf fibre was the best materials with better performance in the testing of thermal, rheological and mechanical properties and failure mode analysis. This research successfully demonstrated the capability of K-ABS composites with different kenaf fibre content serving as FFF filaments. 2021 Thesis http://eprints.utem.edu.my/id/eprint/25413/ http://eprints.utem.edu.my/id/eprint/25413/1/Characterisation%20Of%20Kenaf%20Fibre%20Reinforced%20Acrylonitrile%20Butadiene%20Styrene%20Composites%20For%20Fused%20Filament%20Fabrication.pdf text en public http://eprints.utem.edu.my/id/eprint/25413/2/Characterisation%20Of%20Kenaf%20Fibre%20Reinforced%20Acrylonitrile%20Butadiene%20Styrene%20Composites%20For%20Fused%20Filament%20Fabrication.pdf text en validuser https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=119714 mphil masters Universiti Teknikal Malaysia Melaka Faculty Of Mechanical Engineering Mohammad Taha, Mastura 1. Abdelhaleem, A.M., Abdellah, M.Y., Fathi, H.I. and Dewidar, M., 2016. Mechanical properties of ABS embedded with basalt fiber fillers. Journal for Manufacturing Science and Production, 16(2), pp. 69–74. 2. Agag, T., Koga, T. and Takeichi, T., 2001. Studies on thermal and mechanical properties of polyimide–clay nanocomposites. Polymer, 42(8), pp. 3399–3408. 3. Ahmad, F., Choi, H.S. and Park, M.K., 2015. A review: Natural fiber composites selection in view of mechanical, light weight, and economic properties. Macromolecular Materials and Engineering, 300(1), pp. 10–24. 4. Ahmed, M.S., Attia, T., El-Wahab, A.A., Elgamsy, R. and El-latif, M.A., 2019. Assessment of the physical properties of banana pseudo stem/ ABS composites. In IOP Conference Series: Materials Science and Engineering, 634(1), p. 012023. 5. Akil, H., Omar, M.F., Mazuki, A.A.M., Safiee, S.Z.A.M., Ishak, Z.M. and Bakar, A.A., 2011. Kenaf fibre reinforced composites: A review. Materials & Design, 32(8–9), pp. 4107–4121. 6. Ananthapadmanabha, G.S. and Deshpande, V.V., 2016. Thermal Properties of Acrylonitrile Butadiene Styrene Composites. Indian Journal of Advances in Chemical Science S1, pp. 279–282. 7. Anbukarasi, K. and Kalaiselvam, S., 2014. Study of effect of fibre volume and dimension on mechanical, thermal, and water absorption behaviour of luffa reinforced epoxy composites. Materials & Design, 66, pp. 321–330. 8. Arslan, C. and Dogan, M., 2019. The effects of fiber silane modification on the mechanical performance of chopped basalt fiber / ABS composites. Journal of Thermoplastic Composite Materials, pp. 1–17. 9. Atiqah, A., Jawaid, M., Sapuan, S. M. and Ishak, M. R., 2018. Mechanical and Thermal Properties of Sugar Palm Fiber Reinforced Thermoplastic Polyurethane Composites: Effect of Silane Treatment and Fiber Loading. Journal of Renewable Materials, 6(5), pp. 477–492. 10. Avella, M., Bogoeva-Gaceva, G., Bužarovska, A., Errico, M.E., Gentile, G. and Grozdanov, A., 2008. Poly (lactic acid)‐based biocomposites reinforced with kenaf fibers. Journal of Applied Polymer Science, 108(6), pp. 3542–3551. 11. Ayrilmis, N., Kariz, M., Kwon, J.H. and Kuzman, M.K., 2019. Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials. The International Journal of Advanced Manufacturing Technology, 102(5-8), pp.2195-2200. 12. Azammi, A.N., Sapuan, S.M., Ishak, M.R. and Sultan, M.T.H., 2018. Mechanical and Thermal Properties of Kenaf Reinforced Thermoplastic Polyurethane (TPU)-Natural Rubber (NR) Composites. Fibers and Polymers, 19(2), pp. 446–451. 13. Azwa, Z. N. and Yousif, B. F., 2013. Thermal degredation study of kenaf fibre/epoxy composites using thermo gravimetric analysis. In Proceedings of the 3rd Malaysian Postgraduate Conference (MPC 2013), pp. 256–264. 14. Baba, B.O., Ozmen, U. and Faculty, E., 2015. Preparation and Mechanical Characterization of Chicken Feather / PLA Composites. Polymer Composites, 38(5), pp. 837-845. 15. Baghaei, B., Skrifvars, M. and Berglin, L., 2013. Manufacture and characterisation of thermoplastic composites made from PLA / hemp co-wrapped hybrid yarn prepregs. Composites Part A: Applied Science and Manufacturing, 50, pp. 93–101. 16. Beg, M.D.H. and Pickering, K.L., 2008. Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites. Polymer Degradation and Stability, 93(10), pp. 1939–1946. 17. Bĕhálek, L., Seidl, M. and Dobránsky, J., 2014. Crystallization of Polylactic Acid Composites with Banana and Hemp Fibres by Means of DSC and XRD Methods. Applied Mechanics and Materials, 616, pp. 325–332. 18. Bernard, M., Khalina, A., Ali, A., Janius, R., Faizal, M., Hasnah, K.S. and Sanuddin, A.B., 2011. The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite. Materials and Design, 32(2), pp. 1039–1043. 19. Bikas, H., Stavropoulos, P. and Chryssolouris, G., 2016. Additive manufacturing methods and modeling approaches: A critical review. International Journal of Advanced Manufacturing Technology, 83(1–4), pp. 389–405. 20. Blok, L.G., Longana, M.L., Yu, H. and Woods, B.K., 2018. An investigation into 3D printing of fibre reinforced thermoplastic composites. Additive Manufacturing, 22, pp. 176–186. 21. Boland, C.S., De Kleine, R., Keoleian, G.A., Lee, E.C., Kim, H.C. and Wallington, T.J., 2016. Life cycle impacts of natural fiber composites for automotive applications: effects of renewable energy content and lightweighting. Journal of Industrial Ecology, 20(1), pp. 179–189. 22. Carneiro, O., Silva, A. and Gomes, R., 2015. Fused deposition modeling with polypropylene. Materials & Design, 83, pp. 768–776. 23. Cerneels, J., Voet, A., Ivens, J. and Kruth, J.P., 2013. Additive manufacturing of thermoplastic composites. Composites Week at Leuven, pp. 1–7. 24. Chee, S.S., Jawaid, M., Sultan, M.T.H., Alothman, O.Y. and Abdullah, L.C., 2019. Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforecd epoxy hybrid composites. Composites Part B: Engineering, 163, pp. 165–174. 25. Cherizol, R., Sain, M. and Tjong, J., 2015. Evaluation of the Influence of Fibre Aspect Ratio and Fibre Content on the Rheological Characteristic of High Yield Pulp Fibre Reinforced Polyamide 11 “HYP/PA11” Green Composite. Open Journal of Polymer Chemistry, 5(01), p. 1. 26. Choe, S. (1998) Rheological Properties of Polymers. Korea: Inha University, Inchon. 27. Chohan, J.S., Singh, R., Boparai, K.S., Penna, R. and Fraternali, F., 2017. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications. Composites Part B: Engineering, 117, pp. 138–149. 28. Chung, T.J., Park, J.W., Lee, H.J., Kwon, H.J., Kim, H.J., Lee, Y.K. and Tai Yin Tze, W., 2018. The improvement of mechanical properties, thermal stability, and water absorption resistance of an eco-friendly PLA/kenaf biocomposite using acetylation. Applied Sciences, 8(3), p. 376. 29. Costa, S. F., Duarte, F. M. and Covas, J. A., 2017. Estimation of filament temperature and adhesion development in fused deposition techniques. Journal of Materials Processing Technology, 245, pp. 167–179. 30. Croccolo, D., De Agostinis, M. and Olmi, G., 2013. Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30. Computational Materials Science, 79, pp. 506–518. 31. Dixit, S., Goel, R., Dubey, A., Shivhare, P.R. and Bhalavi, T., 2017. Natural fibre reinforced polymer composite materials - A review. Polymers from Renewable Resources, 8(2), pp. 71-78. 32. El-Shekeil, Y.A., Sapuan, S.M., Abdan, K. and Zainudin, E.S., 2012. Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites. Materials and Design, 40, pp. 299–303. 33. El-Shekeil, Y.A., Sapuan, S.M., Jawaid, M. and Al-Shuja’a, O.M., 2014. Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites. Materials and Design, 58, pp. 130–135. 34. Elsabbagh, A., Steuernagel, L. and Ring, J., 2017. Natural Fibre/PA6 composites with flame retardance properties: Extrusion and characterisation. Composites Part B: Engineering, 108, pp. 325–333. 35. Fakhrul, T. and Islam, M. A., 2013. Degradation behavior of natural fiber reinforced polymer matrix composites. Procedia Engineering, 56, pp. 795–800. 36. Fauzi, F.A., Siregar, J.P. and Tezara, C., 2016. Investigation of thermal behavior for natural fibres reinforced epoxy using thermogravimetric and differential scanning calorimetric analysis. MATEC Web of Conferences, 78. 37. Fernandes, E.M., Correlo, V.M., Mano, J.F. and Reis, R.L., 2013. Novel cork-polymer composites reinforced with short natural coconut fibres: Effect of fibre loading and coupling agent addition. Composites Science and Technology, 78, pp. 56–62. 38. Fischer, F., 2011. Thermoplastics: the best choice for 3D printing. White Paper, Stratasys Inc. 39. Friedrich, K. and Almajid, A. A., 2013. Manufacturing aspects of advanced polymer composites for automotive applications. Applied Composite Materials, 20(2), pp. 107–128. 40. Gamon, G., Evon, P. and Rigal, L., 2013. Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites. Industrial Crops and Products, 46, pp. 173–185. 41. Gibson, I., Rosen, D. W. and Stucker, B., 2010. Design for additive manufacturing. In Additive manufacturing technologies, pp. 299–332. 42. Goh, G.D., Dikshit, V., Nagalingam, A.P., Goh, G.L., Agarwala, S., Sing, S.L., Wei, J. and Yeong, W.Y., 2018. Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics. Materials & Design, 137, pp.79-89. 43. Gopinath, A., Kumar, M. S. and Elayaperumal, A., 2014. Experimental investigations on mechanical properties of jute fiber reinforced composites with polyester and epoxy resin matrices. Procedia Engineering, 97, pp. 2052–2063. 44. Gordeev, E. G., Galushko, A. S. and Ananikov, V. P., 2018. Improvement of quality of 3D printed objects by elimination of microscopic structural defects in fused deposition modeling. PloS one, 13(6), p. e0198370. 45. Grujovic, N., Zivic, F., Zivkovic, M., Sljivic, M., Radovanovic, A., Bukvic, L., Mladenovic, M. and Sindjelic, A., 2017. Custom design of furniture elements by fused filament fabrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(1), pp. 88–95. 46. Gunti, R., V, R. P. A. and Gupta, A. V. S. S. K. S., 2018. Mechanical and degradation properties of natural fiber‐reinforced PLA composites: Jute, sisal, and elephant grass. Polymer Composites, 39(4), pp. 1125–1136. 47. Gurunathan, T., Mohanty, S. and Nayak, S. K., 2015. A review of the recent developments in biocomposites based on natural fibres and their application perspectives. Composites Part A: Applied Science and Manufacturing, 77, pp. 1-25. 48. Halim, N.A., Siregar, J.P., Mathivanan, D., Bachtiar, D., Ghazali, Z., Rejab, M.R.M. and Tezara, C., 2018. The performance of mengkuang leaf fiber reinforced low density polyethylene composites. Journal of Mechanical Engineering and Sciences, 12(2), pp. 3645–3655. 49. Hassan, F., Zulkifli, R., Ghazali, M.J. and Azhari, C.H., 2017. Kenaf fiber composite in automotive industry: an overview. International Journal on Advanced Science, Engineering and Information Technology, 7(1), pp.315-321. 50. Ibrahim, N.A., Yunus, W.M.Z.W., Othman, M., Abdan, K. and Hadithon, K.A., 2010. Poly(Lactic Acid) (PLA)-reinforced Kenaf Bast Fiber Composites: The Effect of Triacetin. Journal of reinforced plastics and composites, 29(7), pp. 1099–1111. 51. Ismail, H., Hamid Abdullah, A. and Abu Bakar, A., 2010. Kenaf core reinforced high-density polyethylene/soya powder composites: The effects of filler loading and compatibilizer. Journal of Reinforced Plastics and Composites, 29(16), pp. 2489–2497. 52. Jawaid, M., Khalil, H.A., Hassan, A., Dungani, R. and Hadiyane, A., 2013. Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites. Composites Part B: Engineering, 45(1), pp. 619–624. 53. Jonoobi, M., Harun, J., Mathew, A.P., Hussein, M.Z.B. and Oksman, K., 2010. Preparation of cellulose nanofibers with hydrophobic surface characteristics. Cellulose, 17(2), pp. 299–307. 54. Kant, S., Jawalkar, C. and Kumar, S., 2017. A Review on processing and mechanical performance of natural fiber composites. Journal of Industrial Engineering and Advances, 2(2), pp. 1–8. 55. Kariz, M., Sernek, M., Obućina, M. and Kuzman, M.K., 2018. Effect of wood content in FDM filament on properties of 3D printed parts. Materials Today Communications, 14, pp. 135–140. 56. Kaseem, M., Hamad, K., Park, J.H. and Ko, Y.G., 2015. Rheological properties of ABS / wood composites. European Journal of Wood and Wood Products, 73(5), pp. 701–703. 57. Kengkhetkit, N. and Amornsakchai, T., 2014. A new approach to “Greening” plastic composites using pineapple leaf waste for performance and cost effectiveness. Materials & Design, 55, pp. 292–299. 58. Khalina, A., Zainuddin, E.S. and Aji, I.S., 2011. Rheological behaviour of polypropylene/kenaf fibre composite: effect of fibre size. In Key Engineering Materials, 471, pp. 513-517. 59. Kim, N. K., Lin, R. J. T. and Bhattacharyya, D., 2015. Effects of wool fibres, ammonium polyphosphate and polymer viscosity on the flammability and mechanical performance of PP/wool composites. Polymer Degradation and Stability, 119, pp. 167–177. 60. Ku, H., Wang, H., Pattarachaiyakoop, N. and Trada, M., 2011. A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering, 42(4), pp. 856–873. 61. Kumar, L. J. and Nair, C. G. K., 2017. Current trends of additive manufacturing in the aerospace industry. In Advances in 3D printing & additive manufacturing technologies, pp. 39–54. 62. Le Duigou, A., Castro, M., Bevan, R. and Martin, N., 2016. 3D printing of wood fibre biocomposites: From mechanical to actuation functionality. Materials and Design, 96, pp. 106–114. 63. Lee, C.H., Sapuan, S.M. and Hassan, M.R., 2017. Mechanical and thermal properties of kenaf fiber reinforced polypropylene/magnesium hydroxide composites. Journal of Engineered Fibers and Fabrics, 12(2), p. 155892501701200206. 64. Leigh, S.J., Bradley, R.J., Purssell, C.P., Billson, D.R. and Hutchins, D.A., 2012. A simple, low-cost conductive composite material for 3D printing of electronic sensors. PloS one, 7(11), p. e49365. 65. Lewandowski, K., Piszczek, K., Zajchowski, S. and Mirowski, J., 2016. Rheological properties of wood polymer composites at high shear rates. Polymer Testing, 51, pp. 58–62. 66. Li, Y., Li, Q. and Ma, H., 2015. The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy composites. Composites Part A: Applied Science and Manufacturing, 72, pp. 40–48. 67. Li, Y. and Mai, Y.W., 2006. Interfacial characteristics of sisal fiber and polymeric matrices. The journal of adhesion, 82(5), pp. 527–554. 68. Lim, Z.Y., Putra, A., Nor, M.J.M. and Yaakob, M.Y., 2018. Sound absorption performance of natural kenaf fibres. Applied Acoustics, 130, pp. 107–114. 69. Lopresto, V., Leone, C. and De Iorio, I., 2011. Mechanical characterisation of basalt fibre reinforced plastic. Composites Part B: Engineering, 42(4), pp. 717–723. 70. Luo, Z., Li, P., Cai, D., Chen, Q., Qin, P., Tan, T. and Cao, H., 2017. Comparison of performances of corn fiber plastic composites made from different parts of corn stalk. Industrial Crops & Products, 95, pp. 521–527. 71. MacDonald, E. and Wicker, R., 2016. Multiprocess 3D printing for increasing component functionality. Science, 353(6307), p. aaf2093. 72. Mangat, A.S., Singh, S., Gupta, M. and Sharma, R., 2018. Experimental investigations on natural fiber embedded additive manufacturing-based biodegradable structures for biomedical applications. Rapid Prototyping Journal, 24(7), pp. 1221–1234. 73. Manshor, M.R., Anuar, H., Aimi, M.N., Fitrie, M.A., Nazri, W.W., Sapuan, S.M., El-Shekeil, Y.A. and Wahit, M.U., 2014. Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials and Design, 59, pp. 279–286. 74. Masood, S. H., 1996. Intelligent rapid prototyping with fused deposition modelling. Rapid Prototyping Journal, 2(1), pp. 24–33. 75. Masood, S. H. and Song, W. Q., 2004. Development of new metal/polymer materials for rapid tooling using Fused deposition modelling. Materials and Design, 25(7), pp. 587–594. 76. Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A. and Hirano, Y., 2016. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Scientific Reports, 6, p. 23058. 77. Mazzanti, V., Mollica, F. and El Kissi, N., 2016. Rheological and mechanical characterization of polypropylene‐based wood plastic composites. Polymer Composites, 37(12), pp. 3460–3473. 78. Meints, P.D. and Smith, C.A., 2003. Kenaf seed storage duration on germination, emergence, and yield. Industrial crops and products, 17(1), pp. 9-14. 79. Methacanon, P., Weerawatsophon, U., Sumransin, N., Prahsarn, C. and Bergado, D.T., 2010. Properties and potential application of the selected natural fibers as limited life geotextiles. Carbohydrate Polymers, 82(4), pp. 1090–1096. 80. Mirbagheri, J., Tajvidi, M., Hermanson, J.C. and Ghasemi, I., 2007. Tensile properties of wood flour/kenaf fiber polypropylene hybrid composites. Journal of applied polymer science, 105(5), pp. 3054–3059. 81. Mohamed, O. A., Masood, S. H. and Bhowmik, J. L., 2015. Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Advances in Manufacturing, 3(1), pp. 42–53. 82. Mohammad, N.B. and Arsad, A., 2013. Mechanical, thermal and morphological study of kenaf fiber reinforced rPET/ABS composites. Malaysian Polymer Journal, 8(1), pp. 8–13. 83. Mohammed, L., Ansari, M.N., Pua, G., Jawaid, M. and Islam, M.S., 2015. A Review on Natural Fiber Reinforced Polymer Composite and Its Applications. International Journal of Polymer Science, 2015. 84. Mohan, N., Senthil, P., Vinodh, S. and Jayanth, N., 2017. A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual and Physical Prototyping, 12(1), pp. 47–59. 85. Navarrete, J.I.M., Hidalgo-Salazar, M.A., Nunez, E.E. and Arciniegas, A.J.R., 2018. Thermal and mechanical behavior of biocomposites using additive manufacturing. International Journal on Interactive Design and Manufacturing, 12(2), pp. 449–458. 86. Navarrete, J.I.M. and Hidalgo-Salazar, M.A., 2018. 3D printing with natural reinforced filaments. In: Solid Freeform Fabrication Symposium, pp. 922–934. 87. Neher, B., Bhuiyan, M.M.R., Kabir, H., Gafur, M.A., Qadir, M.R. and Ahmed, F., 2016. Thermal properties of palm fiber and palm fiber-reinforced ABS composite. Journal of Thermal Analysis and Calorimetry, 124(3), pp. 1281–1289. 88. Ning, F., Cong, W., Hu, Y. and Wang, H., 2017. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties. Journal of Composite Materials, 51(4), pp. 451–462. 89. Ning, F., Cong, W., Hu, Z. and Huang, K., 2017. Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements. Journal of Composite Materials, 51(27), pp. 3733–3742. 90. Ning, H., Pillay, S. and Vaidya, U. K., 2009. Design and development of thermoplastic composite roof door for mass transit bus. Materials and Design, 30(4), pp. 983–991. 91. Nishimura, A., Katayama, H., Kawahara, Y. and Sugimura, Y., 2012. Characterization of kenaf phloem fibers in relation to stem growth. Industrial Crops & Products, 37(1), pp. 547–552. 92. Ochi, S., 2015. Flexural Properties of Long Bamboo Fiber/ PLA Composites. Open Journal of Composite Materials, pp. 70–78. 93. Pang, C., Shanks, R.A. and Daver, F., 2015. Characterization of kenaf fiber composites prepared with tributyl citrate plasticized cellulose acetate. Composites Part A: Applied Science and Manufacturing, 70, pp. 52–58. 94. Parandoush, P. and Lin, D., 2017. A review on additive manufacturing of polymer-fiber composites. Composite Structures, 182, pp. 36–53. 95. Pickering, K.L., Efendy, M.G.A. and Le, T.M., 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing, 83, pp. 98–112. 96. Pickering, K. and Stoof, D., 2017. Sustainable Composite Fused Deposition Modelling Filament Using Post-Consumer Recycled Polypropylene. Journal of Composites Science, 1(2), p. 17. 97. Radzi, A.M., Sapuan, S.M., Jawaid, M. and Mansor, M.R., 2018. Mechanical and thermal performances of roselle fiber-reinforced thermoplastic polyurethane composites. Polymer-Plastics Technology and Engineering, 57(7), pp. 601–608. 98. Rahim, N.A., Ariff, Z.M., Ariffin, A. and Jikan, S.S., 2011. Study on effect of filler loading on the flow and swelling behaviors of polypropylene‐kaolin composites using single‐screw extruder. Journal of Applied Polymer Science, 119(1), pp. 73–83. 99. Rahim, T.N.A.T., Abdullah, A.M. and Md Akil, H., 2019. Recent developments in fused deposition modeling-based 3D printing of polymers and their composites. Polymer Reviews, 59(4), pp.589-624. 100. Rajpurohit, S.R. and Dave, H.K., 2018. Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer. Advances in Manufacturing, 6(4), pp.430-441. 101. Rajpurohit, S.R. and Dave, H.K., 2019. Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer. The International Journal of Advanced Manufacturing Technology, 101(5-8), pp.1525-1536. 102. Ramamoorthy, S.K., Skrifvars, M. and Persson, A., 2015. A review of natural fibers used in biocomposites: Plant, animal and regenerated cellulose fibers. Polymer Reviews, 55(1), pp. 107–162. 103. Ramaraj, B., 2006. Mechanical and thermal properties of ABS and leather waste composites. Journal of Applied Polymer Science, 101(5), pp. 3062–3066. 104. Roberson, D. A., Espalin, D. and Wicker, R. B., 2013. 3D printer selection: A decision-making evaluation and ranking model. Virtual and Physical Prototyping, 8(3), pp. 201–212. 105. Rocha, C.R., Perez, A.R.T., Roberson, D.A., Shemelya, C.M., MacDonald, E. and Wicker, R.B., 2014. Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing. Journal of Materials Research, 29(17), pp. 1859–1866. 106. Russo, P., Simeoli, G., Vitiello, L. and Filippone, G., 2019. Bio-Polyamide 11 Hybrid Composites Reinforced with Basalt / Flax Interwoven Fibers : A Tough Green Composite for Semi-Structural Applications. Fibers, 7(5), p. 41. 107. Sapuan, S.M., Ishak, M.R., Sahari, J. and Sanyang, M.L., 2018. Kenaf fibers and composites. 1st Editio. Boca Raton: Taylor & Francis Group, LLC. 108. Šafka, J., Ackermann, M., Bobek, J., Seidl, M., Habr, J. and Bĕhálek, L., 2016. Use of composite materials for FDM 3D print technology. Materials Science Forum, 862, pp. 174–181. 109. Saheb, D. N. and Jog, J. P., 1999. Natural fiber polymer composites: a review. Advances in Polymer Technology: Journal of the Polymer Processing Institute, 18(4), pp. 351–363. 110. Salem Bala, A. and bin Wahab, S., 2016. Elements and materials improve the FDM products: A review. In Advanced Engineering Forum, 16, pp. 33–51. 111. Salleh, F.M., Hassan, A., Yahya, R. and Azzahari, A.D., 2014. Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites. Composites Part B: Engineering, 58, pp. 259–266. 112. Sanjay, M. A. and Yogesha, B., 2016. Studies on mechanical properties of jute/E-glass fiber reinforced epoxy hybrid composites. Journal of minerals and materials characterization and engineering, 4(01), p. 15. 113. Sarifuddin, N., Ismail, H. and Ahmad, Z., 2013. The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science, 24(2), pp. 97–115. 114. Singh, R., Singh, S. and Mankotia, K., 2016. Development of ABS based wire as feedstock filament of FDM for industrial applications. Rapid Prototyping Journal, 22(2), pp. 300-310. 115. Singh, S., Ramakrishna, S. and Singh, R., 2017. Material issues in additive manufacturing: A review. Journal of Manufacturing Processes, pp. 185–200. 116. Sitticharoen, W., Uthiyoung, C., Passadee, N. and Wongprom, C., 2018. Surface treated bagasse fiber ash on rheological , mechanical properties of PLA / BFA biocomposites. Polímeros, 28(3), pp. 187–195. 117. Sood, A. K., Ohdar, R. K. and Mahapatra, S. S., 2010. Parametric appraisal of mechanical property of fused deposition modelling processed parts. Materials and Design, 31(1), pp. 287–295. 118. Srinivasan, V.S., Boopathy, S.R., Sangeetha, D. and Ramnath, B.V., 2014. Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite. Materials and Design, 60, pp. 620–627. 119. Stanek, M., Manas, D., Manas, M., Navratil, J., Kyas, K., Senkerik, V. and Skrobak, A., 2012. Comparison of different rapid prototyping methods. Internional Journal Math Computation Simulation, 6, pp. 550–557. 120. Stoof, D. and Pickering, K., 2018. Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene. Composites Part B: Engineering, 135, pp. 110–118. 121. Stoof, D., Pickering, K. and Zhang, Y., 2017. Fused deposition modelling of natural fibre/polylactic acid composites. Journal of Composites Science, 1(1), p. 8. 122. Subramaniam, K., Dhar Malingam, S., Feng, N.L. and Bapokutty, O., 2019. The effects of stacking configuration on the response of tensile and quasi‐static penetration to woven kenaf/glass hybrid composite metal laminate. Polymer Composites, 40(2), pp. 568–577. 123. Sukri, S.M., Suradi, N.L., Arsad, A., Rahmat, A.R. and Hassan, A., 2012. Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: Mechanical, thermal and morphological properties. Journal of Polymer Engineering, 32(4–5), pp. 291–299. 124. Tanguy, M., Bourmaud, A., Beaugrand, J., Gaudry, T. and Baley, C., 2018. Polypropylene reinforcement with flax or jute fibre; Influence of microstructure and constituents properties on the performance of composite. Composites Part B: Engineering, 139, pp. 64–74. 125. Taufiq, M.J., Mansor, M.R. and Mustafa, Z., 2018. Characterisation of wood plastic composite manufactured from kenaf fibre reinforced recycled-unused plastic blend. Composite Structures, 189, pp. 510–515. 126. Tawakkal, I.S.M.A., Cran, M.J. and Bigger, S.W., 2014. Effect of kenaf fibre loading and thymol concentration on the mechanical and thermal properties of PLA/kenaf/thymol composites. Industrial Crops and Products, 61, pp. 74–83. 127. Thakur, V.K., Thakur, M.K. and Gupta, R.K., 2014. Review: Raw Natural Fiber-Based Polymer Composites. International Journal of Polymer Analysis and Characterization, 19(3), pp. 256–271. 128. Tharazi, I., Sulong, A.B., Muhamad, N., Haron, C.H.C., Tholibon, D., Ismail, N.F., Radzi, M.K.F.M. and Razak, Z., 2017. Optimization of hot press parameters on tensile strength for unidirectional long kenaf fiber reinforced polylactic-acid composite. Procedia Engineering, 184, pp. 478–485. 129. Torrado, A.R., Shemelya, C.M., English, J.D., Lin, Y., Wicker, R.B. and Roberson, D.A., 2015. Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing. Additive Manufacturing, 6, pp. 16–29. 130. Torres, J., Cole, M., Owji, A., DeMastry, Z. and Gordon, A.P., 2016. An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments. Rapid Prototyping Journal, 22(2), pp. 387–404. 131. Turner, B.N. and Gold, S.A., 2015. A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness. Rapid Prototyping Journal, 21(3), pp. 250–261. 132. Turner, B.N., Strong, R. and Gold, S.A., 2014. A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyping Journal, 20(3), pp. 192–204. 133. Villalpando, L., Eiliat, H. and Urbanic, R. J., 2014. An optimization approach for components built by fused deposition modeling with parametric internal structures. Procedia CIRP, 17, pp. 800–805. 134. Vinogradov, G. V. and Ya. Malkin, A., 1966. Rheological properties of polymer melts. Journal of Polymer Science Part A‐2: Polymer Physics, 4(1), pp. 135–154. 135. Wang, J., Ge, X., Liu, Y., Qi, Z., Li, L., Sun, S. and Yang, Y., 2019. A review on theoretical modelling for shearing viscosities of continuous fibre-reinforced polymer composites. Rheologica Acta, pp. 1–11. 136. Wang, X., Jiang, M., Zhou, Z., Gou, J. and Hui, D., 2017. 3D printing of polymer matrix composites: A review and prospective. Composites Part B: Engineering, 110, pp. 442–458. 137. Wang, X., Zhao, L., Fuh, J.Y.H. and Lee, H.P., 2019. Effect of Porosity on Mechanical Properties of 3D Printed Polymers : Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis. Polymers, 11(7), p. 1154. 138. Wong, K.V. and Hernandez, A., 2012. A review of additive manufacturing. ISRN Mechanical Engineering, 2012, pp. 1–10. 139. Wötzel, K., Wirth, R. and Flake, M., 1999. Life cycle studies on hemp fibre reinforced components and ABS for automotive parts. Die Angewandte Makromolekulare Chemie, 272(1), pp. 121–127. 140. Wu, C.S., Liao, H.T. and Cai, Y.X., 2017. Characterisation, biodegradability and application of palm fibre-reinforced polyhydroxyalkanoate composites. Polymer Degradation and Stability, 140, pp. 55–63. 141. Wu, Y., Xia, C., Cai, L., Garcia, A.C. and Shi, S.Q., 2018. Development of natural fiber-reinforced composite with comparable mechanical properties and reduced energy consumption and environmental impacts for replacing automotive glass-fiber sheet molding compound. Journal of Cleaner Production, 184, pp. 92–100. 142. Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z. and Zainudin, E.S., 2018. Review of Kenaf Reinforced Hybrid Biocomposites: Potential for Defence Applications. Current Analytical Chemistry, 14(3), pp. 226-240. 143. Yeh, S., Agarwal, S. and Gupta, R.K., 2009. Wood – plastic composites formulated with virgin and recycled ABS. Composites Science and Technology, 69(13), pp. 2225–2230. 144. Yuhazri, M., Phongsakorn, P.T., Haeryip, S., Jeefferie, A.R., Puvanasvaran, P., Kamarul, A.M. and Kannan, R., 2011. Mechanical properties of kenaf/polyester composite. International Journal of Engineering & Technology, 11, pp. 127–131. 145. Zhang, W., Wu, A.S., Sun, J., Quan, Z., Gu, B., Sun, B., Cotton, C., Heider, D. and Chou, T.W., 2017. Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens. Composites Science and Technology, 150, pp. 102–110.

Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication

Similar Items