Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2

Grooving is the process of making a narrow channel on a surface of flat or cylindrical workpiece. Often it is performed on workpiece shoulders to ensure the correct fit for mating parts. Groove is widely used in automotive industry, biomedical implants and electronic devices. Though, laser machining...

Full description

Saved in:
Bibliographic Details
Main Author: Abdul Khalim, Abdul Zuhair
Format: Thesis
Language:English
English
Published: 2020
Subjects:
Online Access:http://eprints.utem.edu.my/id/eprint/25427/1/Artificial%20Neural%20Network%20Modelling%20To%20Predict%20Laser%20Micro%20Grooving%20Quality%20Of%20Commercially%20Pure%20Titanium%20Grade%202.pdf
http://eprints.utem.edu.my/id/eprint/25427/2/Artificial%20Neural%20Network%20Modelling%20To%20Predict%20Laser%20Micro%20Grooving%20Quality%20Of%20Commercially%20Pure%20Titanium%20Grade%202.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-utem-ep.25427
record_format uketd_dc
institution Universiti Teknikal Malaysia Melaka
collection UTeM Repository
language English
English
advisor Subramonian, Sivarao

topic T Technology (General)
TJ Mechanical engineering and machinery
spellingShingle T Technology (General)
TJ Mechanical engineering and machinery
Abdul Khalim, Abdul Zuhair
Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2
description Grooving is the process of making a narrow channel on a surface of flat or cylindrical workpiece. Often it is performed on workpiece shoulders to ensure the correct fit for mating parts. Groove is widely used in automotive industry, biomedical implants and electronic devices. Though, laser machining is known as advanced machining process is an alternative machining used by high precision industries as cutting tool. Due to its ultra- flexibility, high quality end product, tight tolerance, quick set up, high repeatability, and many other advantageous, it is being widely accepted and explored for it potential in machining industries. Unfortunately, machining of groove especially micro-groove by traditional machining is very much challenged in dimensional control due to mechanical contact. A micro groove is a basic geometric feature of a micro part. The disadvantages of traditional machining become much severe when it deals with micro-grooving where, not only the external dimensions, but also the metallurgy of the end product is being affected. Although laser lathing is available, it is very complex and expensive where most commonly used in the industries are flat stock laser machining. Thus, an existing 4 by 8 feet 3KW CO2 flatbed laser cutting machine has been transformed to perform laser lathing. The transformation of 2D flatbed laser cutting machine into 3D laser cutting ability is explored of its performance in producing micro-grooves on a Titanium Grade 2. This research work presents the modelling study of micro-grooving in laser machining of commercially pure titanium grade 2 material with CO2 laser by considering the power, gas pressure, cutting speed, depth of cut and focal distance as the designed process parameters. This research focuses on experimental of laser micro-grooving quality and development of artificial neural network (ANN) model. The experimental plans were conducted according to the design of experiment (DOE) to accommodate full range of experimental analysis. Therefore, three significant responses namely groove depth, groove width and groove corner radius were investigated to fall within desired values. Analysis found that an experimental error such as the discovery of an unknown effect, inherent variability in the system, inability to control complex variables, temperature or unexpected mechanical machining tolerance have influenced the predictive model. Two types of model are introduced which are namely singleton output model and multiple output model. The results indicate that, there is a difference of 2% between the two models. Therefore the significant error in predictive model occur due to the factors of pattern recognition. However, the developed ANN model is found valid through data testing where the mean absolute percentage error (MAPE) is less than 20 per cent.
format Thesis
qualification_name Doctor of Philosophy (PhD.)
qualification_level Doctorate
author Abdul Khalim, Abdul Zuhair
author_facet Abdul Khalim, Abdul Zuhair
author_sort Abdul Khalim, Abdul Zuhair
title Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2
title_short Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2
title_full Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2
title_fullStr Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2
title_full_unstemmed Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2
title_sort artificial neural network modelling to predict laser micro grooving quality of commercially pure titanium grade 2
granting_institution Universiti Teknikal Malaysia Melaka
granting_department Faculty of Manufacturing Engineering
publishDate 2020
url http://eprints.utem.edu.my/id/eprint/25427/1/Artificial%20Neural%20Network%20Modelling%20To%20Predict%20Laser%20Micro%20Grooving%20Quality%20Of%20Commercially%20Pure%20Titanium%20Grade%202.pdf
http://eprints.utem.edu.my/id/eprint/25427/2/Artificial%20Neural%20Network%20Modelling%20To%20Predict%20Laser%20Micro%20Grooving%20Quality%20Of%20Commercially%20Pure%20Titanium%20Grade%202.pdf
_version_ 1747834126056030208
spelling my-utem-ep.254272021-12-07T13:41:37Z Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2 2020 Abdul Khalim, Abdul Zuhair T Technology (General) TJ Mechanical engineering and machinery Grooving is the process of making a narrow channel on a surface of flat or cylindrical workpiece. Often it is performed on workpiece shoulders to ensure the correct fit for mating parts. Groove is widely used in automotive industry, biomedical implants and electronic devices. Though, laser machining is known as advanced machining process is an alternative machining used by high precision industries as cutting tool. Due to its ultra- flexibility, high quality end product, tight tolerance, quick set up, high repeatability, and many other advantageous, it is being widely accepted and explored for it potential in machining industries. Unfortunately, machining of groove especially micro-groove by traditional machining is very much challenged in dimensional control due to mechanical contact. A micro groove is a basic geometric feature of a micro part. The disadvantages of traditional machining become much severe when it deals with micro-grooving where, not only the external dimensions, but also the metallurgy of the end product is being affected. Although laser lathing is available, it is very complex and expensive where most commonly used in the industries are flat stock laser machining. Thus, an existing 4 by 8 feet 3KW CO2 flatbed laser cutting machine has been transformed to perform laser lathing. The transformation of 2D flatbed laser cutting machine into 3D laser cutting ability is explored of its performance in producing micro-grooves on a Titanium Grade 2. This research work presents the modelling study of micro-grooving in laser machining of commercially pure titanium grade 2 material with CO2 laser by considering the power, gas pressure, cutting speed, depth of cut and focal distance as the designed process parameters. This research focuses on experimental of laser micro-grooving quality and development of artificial neural network (ANN) model. The experimental plans were conducted according to the design of experiment (DOE) to accommodate full range of experimental analysis. Therefore, three significant responses namely groove depth, groove width and groove corner radius were investigated to fall within desired values. Analysis found that an experimental error such as the discovery of an unknown effect, inherent variability in the system, inability to control complex variables, temperature or unexpected mechanical machining tolerance have influenced the predictive model. Two types of model are introduced which are namely singleton output model and multiple output model. The results indicate that, there is a difference of 2% between the two models. Therefore the significant error in predictive model occur due to the factors of pattern recognition. However, the developed ANN model is found valid through data testing where the mean absolute percentage error (MAPE) is less than 20 per cent. 2020 Thesis http://eprints.utem.edu.my/id/eprint/25427/ http://eprints.utem.edu.my/id/eprint/25427/1/Artificial%20Neural%20Network%20Modelling%20To%20Predict%20Laser%20Micro%20Grooving%20Quality%20Of%20Commercially%20Pure%20Titanium%20Grade%202.pdf text en public http://eprints.utem.edu.my/id/eprint/25427/2/Artificial%20Neural%20Network%20Modelling%20To%20Predict%20Laser%20Micro%20Grooving%20Quality%20Of%20Commercially%20Pure%20Titanium%20Grade%202.pdf text en validuser https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=119771 phd doctoral Universiti Teknikal Malaysia Melaka Faculty of Manufacturing Engineering Subramonian, Sivarao 1. Abedin, F., 2010. Review on Heat Affected Zone (HAZ) in Laser Machining. Proceedings of the 6th Annual GRASP Symposium, Eugene Hughes Metropolitan Complex, 23 April 2010. Wichita State University. 2. Amit, S., Vinod, Y., 2013. Modeling and Optimization of Cut Quality during Pulsed Nd:YAG Laser Cutting of Thin Al-Alloy Sheet for Curved Profile. Optics and Lasers in Engineering, 51, pp. 77–88. 3. Andrej, K., Janez B. Andrej, K. 2011. Introduction to the Artificial Neural Networks, Artificial Neural Networks - Methodological Advances and Biomedical Applications. [e- book] Rijeka: IntechOpen. Available through: http://www.intechopen.com/books/artificial- neural-networksmethodological-advances-and-biomedical-applications/introduction-to-the- artificial-neural-networks [Accessed on 30 March 2018]. 4. Aerospace specification metals Inc., n.d. Titanium Grade 2. [online] Available at http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=MTU020. [Accessed on May 2016]. 5. Agrawal, R., Wang, C. 2016. Laser Beam Machining. In Encyclopedia of Nanotechnology (Bhushan, B., ed.), pp. 1-15. Dordrecht: Springer. 6. Anonymous, 2010. Applications in Laser Machining: Introduction to Laser Machining of Metals. [online] Available at: http://www.mrl.columbia.edu/ntm/pgIndex.html. [Accessed on May 2010]. 7. Anonymous, 2010. Duty cycle. [online] Available at:http://www.teskolaser.com/laserglossaryd.html. [Accessed on June 2010]. 8. Anonymous, 2019. CO2 Laser Cutting (Industrial Application and Key Technology). [online] Available at: https://www.machinemfg.com/co2-laser-cutting-technology/ [Accessed on 18 April 2019]. 9. Arkadiusz J.A., Maciej N., Konrad, S., Jacek, P., Krzysztof M.A., 2013. The Influence of Organobentonite Clay on CO2 Laser Grooving of Nylon 6 Composites. International Journal Advanced Manufacturing Technology, 69, pp. 1389–1401. 10. Armarego, E.J.A., Zhao, H., 1996. Predictive Force Models For Point-Thinned and Circular Centre Edge Twist Drill Designs. CIRP Annals Technology, 45, pp. 65–70. 11. Armtage, K., Brandt, M., Masood, S., n.d. Laser Assisted Machining of Hard-To-Wear Materials, Chalapi Pomat-Weir Warman Ltd. 12. Atsushi, Y., Kosuke, K., Yasunobu, K., Naoyuki, M., Hiroshi, S., Kou, K., 2001. Development of laser turning using femtosecond laser ablation. In Isamu Miyamoto, Yong Feng Lu, Koji Sugioka, Jan J. Dubowski, Proceeding of Second International Symposium on Laser Precision Microfabrication, Singapore, 16 May 2001. SPIE publisher. 13. Bappa, A., Subrata, M., Bipan, T., Dipten, M., 2011. Application of Artificial Neural Network for Predicting Weld Quality in Laser Transmission Welding of Thermoplastics. Applied Soft Computing 11, pp. 2548–2555. 14. Bartels, F., Suess, B., Wagner, A., Hauptmann, J., Wetzig, A., Beyer, E., 2011. “Agility” – Complexity Description in a New Dimension applied for Laser Cutting. Physics Procedia, 12, pp. 543–547. 15. Basem, F., Yousef, George, K., Knopf, Evgueni V., Bordatchev, Suwas, K., Nikumb, 2003. Neural Network Modeling and Analysis of the Material Removal Process during Laser Machining. International Journal Advanced Manufacturing Technology, 22, pp. 41-53. 16. Basheer, I.A. and Hajmeer, M., 2000. Artificial Neural Networks: Fundamentals, Computing, Design, and Application. Journal of Microbiological Methods, 43, pp. 3-31. 17. Bayoumi, A.E., Yücesan, G.D., Hutton, V., 1994. On The Closed Form Mechanistic Modeling of Milling: Specific Cutting Energy, Torque, and Power. Journal of Materials Engineering and Performance, 3 (1), pp. 151-158. 18. Benardos, P.G. and Vosniakos, G., 2003. Predicting Surface Roughness in Machining: A Review. International Journal Machine Tools Manufacturing, 43, pp. 833–844. 19. Borowiecand, A. and Haugen, H.K., 2004. Femtosecond Laser Micromachining of Grooves in Indium Phosphide. Applied. Physics. A, 79, pp. 521–529. Box, G.E.P. and Draper, N.R., 1987. Wiley Series in Probability and Mathematical Statistics. Empirical Model-Building and Response Surfaces. Oxford, England: John Wiley & Sons. 20. Bridgman, P.W., 1952. Metallurgy and metallurgical engineering series, New York: McGraw-Hill. 21. Bunting, K.A., Cornfield, G., 1975. Toward A General Theory of Cutting: A Relationship between the Incident Power Density and the Cut Speed. Journal of Heat Transfer, pp. 116- 122. 22. Campanelli, S.L., Casalino, G., Ludovico, A.D., Bonserio, C., 2013. An Artificial Neural Network Approach for the Control of the Laser Milling Process. International Journal Advanced Manufacturing Technology, 66, pp. 1777–1784. 23. Campanelli, S.L., Ludovico, A.D., Bonserio, C., Cavalluzzi, P., Cinquepalmi, M., 2007. Experimental Analysis of the Laser Milling Process Parameters. Journal of Materials Processing Technology, 191, pp. 220–223. 24. Cember, H., 1987. Introduction to Health Physics, Germany: Pergamon Press. 25. Cenna, A.A., Mathew, P., 2002. Analysis and Prediction of Laser Cutting Parameters of Fibre Reinforced Plastics (FRP) Composite Materials. International Journal of Machine Tools and Manufacture, 42, pp. 105–113. 26. Ceretti, E., Lazzaroni, C., Menegardo, L., Altan, T., 2000. Turning Simulations Using a Three-Dimensional FEM Code. Journal Material Processing Technology, 98 (1), pp. 99–103. 27. Chen, C., Li, J., Zhan, S., Yu, Z., Xu, W., 2016. Study of Micro Groove Machining By Micro ECM. Procedia CIRP, 42, pp. 418-422. 28. Cheraghi, S. H., Rajaram, N., Sheikh-Ahmad, J., 2003. CO2 Laser Cut Quality of 4130 Steel. International Journal of Machine Tools & Manufacture, 43, pp. 351-358. 29. Childs, T.H.C., 1980. Elastic Effects in Metal Cutting Chip Formation. International Journal Mechanical Science, 22, pp. 457–466. 30. Ching-Chuan, M. and Jehnming, L., 2006. An Investigation of the Surface Contours in Laser Grooving. International Journal Advance Manufacturing Technology, 28, pp. 76-81. 31. Ching-Chuan, M. and Jehnming, L., 2003. Supersonic Flow Characteristics in Laser Grooving. Optics & Laser Technology, 35, pp. 597-604. 32. Chinmay, K.D. and Abdulhafiz S., 2012. Prediction of depth of cut for single-pass laser micro-milling process using semi-analytical, ANN and GP approaches. International Journal Advanced Manufacturing Technology 60, pp. 865–882. 33. Chopra, S., Chawla, H.M., 1992. Laser in Chemical and Biological Sciences. New Delhi: New Age International Publisher. 34. Chou, Y.K., Evans, C.J., Barash, M.M., 2003. Experimental Investigation on Cubic Boron Nitride Turning of Hardened AISI 52100 Steel. Journal Material Processing Technology, 134, pp. 1–9. 35. Choudhury, I.A., Shirley, S., 2010. Laser Cutting of Polymeric Materials: An Experimental Investigation. Optics & Laser Technology, 42, pp. 503–508. 36. Chryssolouris, G. M., 1986. Stock Removal by Laser Cutting. United State. Pat. 4625093. Chryssolouris, G., 1991. Laser Machining: Mechanical Engineering Series, New York: Springer. 37. Chryssolouris, G., 1991. Laser Machining: Theory and Practice, New York: Springer- Verlag. 38. Chryssolouris, G., Anastasia, N., Sheng, P., 1991c. Three-dimensional Laser Machining for Flexible Manufacturing. American Society of Mechanical Engineers, 50, pp. 163-178. 39. Chryssolouris, G., Bredt, J., Kordas, S., Wilson, E., 1988. Theoretical Aspects of a Laser Machine Tool. Journal of Engineering for Industry, 110 (1), pp. 65-70. 40. Chryssolouris, G., Sheng, P., 1991b. Recent Developments in Three-dimensional Laser Machining. Laser Institute of America (LIA), 71, pp. 281-293. 41. Chryssolouris, G., Sheng, P., Anastasia, N., 1991a. Development of Three-dimensional Laser Machining Techniques. Society of Automotive Engineers (SAE) Transactions, 100, pp. 916-924. 42. Chryssolouris, G., Sheng, P., Choi, W.C., 1990. Three-dimensional Laser Machining of Composite Materials. Journal of Engineering Materials and Technology, Transactions of the ASME, 112 (4), pp. 387-392. 43. Chryssolouris, G., Sheng, P., Choi, W.C., 1988. Investigation of Laser Grooving for composite Material. CIRP Annals, 37 (1), pp. 161-164. 44. Chryssolouris, G., Bredt, J., Kordas, S., 1985. Laser Turning for Difficult to Machine Materials. American Society of Mechanical Engineers, 17, pp. 9-17. 45. Chwan-Huei Tsai, Hong-Wen Chen, 2003. Laser Milling of Cavity in Ceramic Substrate by Fracture-Machining Element Technique. Journal of Materials Processing Technology, 136, pp. 158–165. 46. Cihan, K., Omer, K., Ibrahim, U., Yusuf, U., 2006. Laser Cutting of Steel Sheets: Influence of Workpiece Thickness and Beam Waist Position on Kerf Size and Stria Formation. Journal of Materials Processing Technology, 172, pp. 22–29. 47. Colding, B.N., 1991. A Tool-Temperature/Tool-Life Relationship Covering a Wide Range of Cutting Data. CIRP Annals Technology, 40, pp. 35–40. 48. Colding, B.N., 1958. A Three-dimensional, Tool-life Equation: Machining Economics. Journal Engineering Industrial, 81, pp. 239–250. 49. Corcoran, A., Sexton, L., Seaman, B., Ryan, P., Byrne, G., 2002. The Laser Drilling of Multi-layer Aerospace Material System. Journal of Materials Processing Technology, 123, pp. 100–106. 50. Dakić, P., Dakić, V., 2012. Machining of Hard-Workable Materials Using Two Laser Beams. Contemporary Materials, III-2, pp. 194-200. 51. Dasilva, I.N., Hernane, S.D., Andrade, F.R., Liboni, L.H.B., Dos, R.A.S.F., 2017. Artificial Neural Network Architectures and Training Processes. In: Artificial Neural Networks, pp. 21-28. Cham Switzerland: Springer International Publishing. 52. David, K., 2007. A Brief Introduction to Neural Networks. [e-book]. Available through: http://www.dkriesel.com [Accessed on 14 September 2017]. 53. Deile, J., LaManna, Greg., Fritz, Michael., Fischer, Axel., 2006. A New Approach to 3D Laser Cutting. In: ICALEO 2006 - 25th International Congress on Applications of Laser and Electro-Optics, 30 October- 2 November, 2006. Laser Institute of America publisher. 54. Dhaval, P.P., 2013. Review on CO2 Laser Cutting Process Parameter. GIT-Journal of Engineering and Technology 6, pp. 1-8. 55. Dhupal, D., Doloi, B., Bhattacharyya, B., 2009. Modeling and Optimization on Nd:YAG Laser Turned Micro-Grooving of Cylindrical Ceramic Material. Optics and Lasers in Engineering, 47, pp. 917–925. 56. Dhupal, D., Doloi, B., Bhattacharyya, B., 2008. Pulsed Nd:YAG Laser Turning of Micro- Groove on Aluminum Oxide Ceramic (Al2O3). International Journal of Machine Tools and Manufacture, 48, pp. 236–248. 57. Dhupal, D., Doloi, B., Bhattacharyya, B., 2007. Optimization of Process Parameters of Nd:YAG Laser Micro-Grooving of Al2TiO5 Ceramic Material By Response Surface Methodology and Artificial Neural Network Algorithm. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221, pp. 1341-1351. 58. Dirikolu, M.H., Childs, T.H.C., 2000. Modelling Requirements for Computer Simulation of Metal Machining. Turkish Journal Engineering Environment Science, 24, pp. 81–93. 59. Dirk, P., 2001. Laser Cutting, LIA Handbook of Laser Materials Processing, Laser Institute of America, pp. 425-433. 60. Dixit, S.R., Das, S.R., Dhupal, D., 2018. Parametric Optimization of Nd:YAG Laser Micro-grooving on Aluminum Oxide Using Integrated RSM‑ANN‑GA Approach. Journal of Industrial Engineering International, 15 (2), pp. 333-349. 61. Doriana, M., D’Addona, S.G., Claudio, L., Davide, M., 2016. Prediction of Poly-Methyl- Methacrylate Laser Milling Process Characteristics Based On Neural Networks and Fuzzy Data. Procedia CIRP, 41, pp. 981 – 986. 62. Eltawahni, H.A., Olabi A.G., Benyounis K.Y., 2011. Investigating the CO2 Laser Cutting Parameters of MDF Wood Composite Material. Optics & Laser Technology, 43, pp. 648–659. 63. Eltawahni, H.A., Olabi A.G., Benyounis K.Y., 2010. Effect of Process Parameters and Optimization of CO2 Laser Cutting of Ultra High-Performance Polyethylene. Materials and Design, 31, pp. 4029–4038. 64. Ernst, H. Merchant, M.E., 1941. Chip Formation, Friction and High Quality Machined Surfaces. Surface Treatment of Metals, 29, pp. 299–378. 65. Fasasi, A.Y., Mwenifumbo, S., Rahbar, N., Chen, J., Li, M., Beye, A.C., Arnold, C.B., Soboyejo, W.O., 2009. Nano-Second UV Laser Processed Micro-Grooves on Ti6Al4V for Biomedical Applications. Materials Science and Engineering C, 29, pp. 5-13. 66. Fausett, L.V., and Fausett, L., 1994. Fundamentals of Neural Networks: Architectures, Algorithms, and Applications. [e-book] United States: Prentice-Hall. Available through: http: //www.csbdu.in/csbdu-old/pdf/Fundamentals%20Of%20Neural%20Networks.pdf [Accessed on 15 May 2018]. 67. Feng, C.-X., Wang, X.-F., 2003. Surface Roughness Predictive Modeling: Neural Networks versus Regression. IIE Transactions, 35, pp. 11–27. 68. Finnie, I., 1963. Comparison of Stress-Strain Behavior in Cutting with That in Other Materials Tests. International Research Production Engineering, pp. 76–82. 69. Fisk Alloy Wire Inc., n.d. Wire Facts: Edges and Corners. [online] Available at https://fiskalloy.com/products/wire-facts/edges-and-corners/. [Accessed on May 2018]. 70. Giovanni, T., Luca T., Giampaolo C., 2003. Prediction of Melt Geometry in Laser Cutting. Applied Surface Science, 208-209, pp. 142-147. 71. Gokhan, A., Izzet K., Coskun, H., 2014. Artificial Neural Network and Regression Models for Performance Prediction of Abrasive Waterjet in Rock Cutting. International Journal Advanced Manufacturing Technology, 75, pp. 1321–1330. 72. Guo, Y.B., Liu, C.R., 2002. 3D FEA Modeling of Hard Turning. Journal Manufacturing Science Engineering, 124 (2), pp. 189-199. 73. Haitjema, H., 1997. International Comparison of Depth Setting Standards. Metrologia, 34, pp. 161-167. 74. Hans-Jochen, F., 2008. Principles of Lasers. In Lasers in Chemistry (Maximilian, L.), pp.3-32. Germany: Wiley-VCH. 75. Harničárová, M., Valíček, J., Kušnerová, M., Grznárik, R., Petrů, J., Čepová, L., 2012. A New Method for the Prediction of Laser Cut Surface Topography. Measurement Science Review, 12, (5) pp. 195-204. 76. Hayat, A.E., 2011. Optimisation of Process Parameters of High Power CO2 Laser Cutting For Advanced Materials. Doctoral Thesis, University of Dublin City. 77. Ion, J.C., 2005. Laser Processing of Engineering Materials, United Kingdom: Elsevier Butterworth Heinemann. 78. Ivester, R.W., Kennedy, M., Davies, M., Stevenson, R., Thiele, J., Furness, R., Athavale, S., 2000. Assessment of Machining Models: Progress Report. Machining Science Technology, 4, pp. 511–538. 79. Jahnavi, M., 2017. Introduction to Neural Networks, Advantages and Applications. [online] Available at: https://www.deeplearningtrack.com/single- post/2017/07/09/Introduction-to-Neural-Networks-Advantages-and-Applications 80. [Accessed on 8 May 2018]. 81. Jeremy, A.P., Eric J.W., 2007. An Ultra-Short Pulse Laser Lathe for Axisymmetric Micromachining of Explosives. In: Joseph Neev, Stefan Nolte, Alexander Heisterkamp, Christopher B. Schaffer, Proceeding of Commercial and Biomedical Applications of Ultrafast Lasers VII, San Jose, CA, USA, 21 January 2007. SPIE publisher. 82. Jure, Z., 1994. Introduction to Artificial Neural Network (ANN) Methods: What They Are and How to Use Them. Acta Chimica Slovenica, 41, (3), pp. 327-352. 83. Kannatey-Asibn, E., 2009. Principles of Laser Materials Processing, New Jersey: John Wiley & Sons. 84. Kardekar, A.D., 2005. Modeling and Optimization of Machining Performance Measures in Face Milling of Automotive Aluminum Alloy A380 Under Different Lubrication/Cooling Conditions For Sustainable Manufacturing. Doctoral Thesis, University of Kentucky. 85. Keye, W.R., 1990. Laser Surgery in Gynecology and Obstetrics. 2nd ed., Chicago: Year Book Medical Publishers. 86. Kibria, G., Doloi, B., Bhattacharyya, B., 2014. Modelling and Optimization of Nd:YAG Laser Micro-Turning Process during Machining of Aluminum Oxide (Al2O3) Ceramics Using Response Surface Methodology And Artificial Neural Network. Manufacturing Review, 1 (12), pp. 1-8. 87. Kibria, G., Doloi, B., Bhattacharyya, B., 2013. Predictive Model and Process Parameters Optimization of Nd:YAG Laser Micro-Turning of Ceramics. The International Journal of Advanced Manufacturing Technology, 65 (1-4), pp. 213-229. 88. Kibria, G., Doloi, B., Bhattacharyya, B., 2010. Experimental Analysis on Nd:YAG Laser Micro-Turning of Alumina Ceramic. The International Journal of Advanced Manufacturing Technology, 50 (5-8), pp. 643-650. 89. Klamecki, B.E., 1973. Incipient Chip Formation in Metal Cutting - A 3D Finite Element Analysis. Doctoral Thesis, University of Illinois. 90. Kobayashi, S., Thomsen, E.G., 1962. Metal-Cutting Analysis—I: Re-Evaluation and New Method of Presentation of Theories. Journal Manufacturing Science Engineering, 84, pp.63–70. 91. Komvopoulos, K., Erpenbeck, S.A., 1991. Finite Element Modeling of Orthogonal Metal Cutting. Journal Manufacturing Science Engineering, 113, pp. 253–267. 92. Kronenberg, M., 1966. Machining Science and Application. London: Pergamon Press. 93. Kudo, H., 1965. Some New Slip-Line Solutions for Two-Dimensional Steady-State Machining. International Journal Mechanical Science, 7, pp. 43–55. 94. Lallemand, G., Jacrot, G., Cicala, E., Grevey, D.F., 2000. Grooving By Nd:YAG Laser Treatment. Journal of Materials Processing Technology, 99, pp. 32-37. 95. Lamikiz, A., Lo´pez de Lacalle L.N., Sa´nchez J.A., Del Pozo D., Etayo J.M., Lo´pez J.M., 2005. CO2 Laser Cutting of Advanced High Strength Steels (AHSS). Applied Surface Science, 242, pp. 362–368. 96. Lange, F.J., Ruhland, G., 1989. Three-dimensional Laser Machining with Industrial Robots. Werkstatt und Betrieb, 122, pp. 39-44. 97. Lee, E.H., Shaffer, B.W., 1949. The Theory Of Plasticity Applied To A Problem Of Machining, United State: Division of Applied Mathematics, Brown. 98. Li, L., Kim, J.H., Shukor, M.H.A., 2005. Grit Blast Assisted Laser Milling/Grooving of Metallic Alloys. CIRP Annals, 54 (1), pp. 183-186. 99. Liang, W.L., Ngoi, B.K.A., Lim, L.E.N., Venkatakrishnan, K., Hee, C.W., 2003. Micromachining of Circular Ring Microstructure by Femtosecond Laser Pulses. Optics & Laser Technology, 35, pp. 285 – 290. 100. Li-fang, M., Gen-yu, C., Ming-jun Z., Xu-fei, L., Zujian, W., 2009. Study on Three- Dimensional Laser Cutting Technology in Auto-Body Panel. In: Dianyuan Fan, Horst Weber, Xiao Zhu, Dongsheng Jiang, Xiaochun Xiao, Weiwei Dong, Desheng Xu, Proceeding of Photonics and Optoelectronics Meetings (POEM) 2009: Industry Lasers and Applications. Wuhan, China, 8 August 2009. SPIE publisher. 101. Lin, Z.C., Lin, S.Y., 1992. A Coupled Finite Element Model of Thermo-Elastic-Plastic Large Deformation for Orthogonal Cutting. Journal Engineering Material Technology, 114 (2), pp. 218–226. 102. Liu, J.S., Li, L.J., Jin, X.Z., 1999. Accuracy Control of Three-dimensional Nd:YAG Laser Shaping by Ablation. Optics & Laser Technology, 31, pp. 419-423. 103. Low, D.K.Y., Li, L., 2001. An Investigation into Melt Flow Dynamics during Repetitive Pulsed Laser Drilling of Transparent Media. Optics & Laser Technology, 33, pp. 515–522. 104. Luttervelt, V.C.A., Childs, T.H.C., Jawahir, I.S., Klocke, F., Venuvinod, P.K., Altintas, Y., Armarego, E., Dornfeld, D., Grabec, I., Leopold, J., Lindstrom, B., Lucca, D., Obikawa, T., Sato, H., 1998. Present Situation and Future Trends in Modelling of Machining Operations Progress Report of the CIRP Working Group “Modelling of Machining Operations.” CIRP Annals Manufacturing. Technology, 47, pp. 587–626. 105. LVD, 2001. Manual of Helius 2513 Laser Machine, Technology & Variables 4, LVD Malaysia. 106. Madic, M., Radovanovic, M., 2012. An Artificial Intelligence Approach for the Prediction of Surface Roughness in CO2 Laser Cutting. Journal of Engineering Science and Technology 7 (6), pp. 679 – 689. 107. Madić, M., Radovanovića, M., Nedić, B., 2012. Correlation between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel. Tribology in Industry, 34 (4), pp. 232-238. 108. Madić, M.J., Radovanovic, M.R., 2012. Analysis of the Heat Affected Zone in CO2 Laser Cutting. Thermal Science, 16 (2) pp. 363-373. 109. Melhem, O.A., Yilbas, B.S., Shuja, S.Z., 2011. Three-dimensional Consideration of Jet Impingement on to the Kerf in Relation to Laser Cutting Process: Effect of Jet Velocity on Heat Transfer Rates. Optics and Lasers in Engineering, 49, pp. 384–395. 110. Merchant, M.E., 1945. Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip. Journal of Applied Physics, 16, pp. 267–275. 111. Miloš, J.M. and Miroslav, R.R., 2011. Optimal Selection of ANN Training and Architectural Parameters Using Taguchi Method: A Case Study. FME Transactions, 39 (2), pp. 79-86. 112. Miloš, M., Gheorghe, B., Miroslav, R., 2013. An Artificial Neural Network Approach for Analysis and Minimization of HAZ in CO2 Laser Cutting of Stainless Steel. U.P.B. Sci. Bull., Series D, 75 (2), pp. 85-96. 113. Miloš, M., Miroslav, R., 2012. Comparative Modeling of CO2 Laser Cutting Using Multiple Regression Analysis and Artificial Neural Network. International Journal of Physical Sciences, 7 (16), pp. 2422 – 2430. 114. Ming-Jong, T., Chen-Hao, L., Cheng-Che, C., 2008. Optimal Laser-Cutting Parameters for QFN Packages by Uti-Lizing Artificial Neural Networks and Genetic Algorithm. Journal of Materials Processing Technology 208, pp. 270-283. 115. Miroslav, R., Milos, M., 2011. Experimental Investigations of CO2 Laser Cut Quality: A Review. Nonconventional Technologies Review, 4, pp. 35-42. 116. Mohammed, M.J., Sarah, T.A.Q., Zaidan, A.A., Zaidan, B.B., Naji, A.W., Ibraheem, T.A.Q., 2011. An Overview of Laser Principle, Laser-Tissue Interaction Mechanisms and Laser Safety Precautions for Medical Laser Users. International Journal of Pharmacology, 7 (2), pp. 149-160. 117. Molpeceres, C., Lauzurica, S., Garcı´a-Ballesteros, J.J., Morales, M., Ocan˜a, J.L., 2007. Advanced 3D Micromachining Techniques Using UV Laser Sources. Microelectronic Engineering, 84, pp. 1337–1340. 118. Mukherjee, I., Ray, P.K., 2006. A Review of Optimization Techniques in Metal Cutting Processes. Computer Industrial Engineering, 50, pp. 15–34. 119. Myers, R.H. and Montgomery, D.C., 2002. Response Surface Methodology: Product and Process Optimization Using Designed Experiments, 2nd ed., New York: John Wiley & Sons. 120. Nalbant, M., Gökkaya, H., Toktaş, İ., Sur, G., 2009. The Experimental Investigation of the Effects of Uncoated, PVD- and CVD-Coated Cemented Carbide Inserts and Cutting Parameters on Surface Roughness in CNC Turning and its Prediction Using Artificial Neural Networks. Robotics and Computer-Integrated Manufacturing. 25 (1), pp. 211–223. 121. Norikazu, T., Shigenori, Y., Masao, H., 1996. Present and Future of Lasers for Fine Cutting of Metal Plate. Journal of Materials Processing Technology, 62, pp. 309-314. 122. Nukman, Y., Hassan, M.A., Harizam, M.Z., 2013. Optimization of Prediction Error in CO2 Laser Cutting Process by Taguchi Artificial Neural Network Hybrid with Genetic Algorithm. Applied Mathematics & Information Sciences 7 (1), pp. 363-370. 123. Nurul, S.S., Khairiyah, M.Y., Asngari, M.S., 2018. Quality Prediction Modeling of Palm Oil Refining Plant in Malaysia Using Artificial Neural Network Models. International Journal of Engineering & Technology, 7 (3.26), pp. 19-22. 124. Ohbuchi, Y., Obikawa, T., 2003. Finite Element Modeling of Chip Formation in the Domain of Negative Rake Angle Cutting. Journal Engineering Material Technology, 125 (3), pp. 324-332. 125. Oshea, D.C., Callen, W.R., Rhodes, W.T., 1978. Introduction to Lasers and their Applications. 2nd ed., USA: Addison-Wesley Publication Company. 126. Oxley, P.L.B., Young, H.T., 1989. The Mechanics of Machining: An Analytical Approach to Assessing Machinability, Ellis Horwood Publisher. 127. Özel, T., Altan, T., 2000. Determination of Workpiece Flow Stress and Friction at the Chip-Tool Contact for High-Speed Cutting. International Journal Machine Tools Manufacturing, 40, pp. 133–152. 128. Özel, T., Karpat, Y., 2005. Predictive Modeling of Surface Roughness and Tool Wear in Hard Turning Using Regression and Neural Networks. International Journal Machine Tools Manufacturing, 45, pp. 467–479. 129. Paul, S.S., Vinay, S.J., 1995. Analysis of Heat-Affected Zone Formation for Laser Cutting of Stainless Steel. Journal of Materials Processing Technology, 53, pp. 879-892. 130. Petring, D., Abels, P., Beyer, E., Herziger, G., 1988. Werkstoffbearbeitung mit Laserstrahlung, Feinwerktechnik and Messtechnik, 96, pp. 364-372. 131. Petru, J., Zlamal, T., Robert, C., Monkova, K., Monka, P., 2013. Influence of Cutting Parameters on Heat-Affected Zone after Laser Cutting. Technical Gazette 20 (2), pp. 225-230. 132. Pham, D.T., Dimov, S.S., Petkov, P.V., 2007. Laser Milling of Ceramic Components. International Journal of Machine Tools & Manufacture, 47, pp. 618–626. 133. Pragya, S., and Abhishek, T., 2014. Artificial Neural Network Modeling and Optimization Using Genetic Algorithm of Machining Process. Journal of Automation and Control Engineering, 2 (4), pp. 348-352. 134. Prajapati, B.D., Patel, R.J., Khatri, B.C., 2013. Parametric Investigation of CO2 Laser Cutting of Mild Steel and Hardox-400 Material. International Journal of Emerging Technology and Advanced Engineering, 3 (4) pp. 204-208. 135. Radovanovic, M., Dašić, P., 2006. Research on Surface Roughness by Laser Cut. The Annals of University “Dunărea De Jos “Of Galaţi Fascicle Viii (Xii), pp. 84-88. Radovanovic, M., Madic, M., 2010. Methodology of Neural Network Based Modeling of Machining Processes. International Journal of Modern Manufacturing Technologies, II (2), pp. 77-82. 136. Rajaram, N., Sheikh-Ahmad, J., Cheraghi, S.H., 2003. CO2 Laser Cut Quality of 4130 Steel. International Journal of Machine Tools & Manufacture, 43, pp. 351–358. 137. Rama, B.R.C., Ramakotaiah, K., Rajesh, S., Jamaleswara, K.P., 2018. A study on die sinking EDM of Nimonic C-263 super alloy: an intelligent approach to predict the process parameter using ANN. International Journal of Engineering & Technology, 7 (1.1), pp. 651-654. 138. Ranaganth, B.J., and Viswanath, G., 2011. Application of Artificial Neural Network for Optimizing Cutting Variables in Laser Cutting of 304 Grade Stainless Steel. International Journal of Applied Engineering and Technology, 1 (1), pp.106-112. 139. Rao, M.C., 2013. A Brief Introduction to Lasers and Applications: Scientific Approach.Research Journal of Material Sciences, 1 (2), pp. 20-24. 140. Riebel, A., Bauer, R., Warkentin, A., 2020. Investigation into the Effect of Wheel Groove Depth and Width on Grinding Performance in Creep-Feed Grinding. The International Journal of Advanced Manufacturing Technology, 106, pp. 4401–4409. 141. Riveiro, A., Quintero, F., Lusqui˜nos, F., Comesa˜na, R., Pou, J., 2011. Effects of Processing Parameters on Laser Cutting of Aluminium–Copper Alloys Using Off-Axial Supersonic Nozzles. Applied Surface Science, 257, pp. 5393–5397. 142. Riveiro, A., Quintero, F., Lusqui˜nos, F., Comesa˜na, R., Pou, J., 2010. Parametric Investigation of CO2 Laser Cutting of 2024-T3 Alloy. Journal of Materials Processing Technology, 210, pp. 1138–1152. 143. Romoli, L., Tantussi, G., Dini, G., 2011. Experimental Approach to the Laser Machining of PMMA Substrates for the Fabrication of Microfluidic Devices. Optics and Lasers in Engineering, 49, pp. 419–427. 144. Romoli, L., Tantussi, G., Dini, G., 2007. Layered Laser Vaporization of PMMA Manufacturing 3D Mould Cavities. Annals of the CIRP Vol. 56, pp. 209-212. 145. Rosliza, A., 2006. Quality Investigation of Linear Laser Cutting. [online] Available at: http://library.utem.edu.my/index2.php?option=com_docman&task=doc_view&gid=641&It emid=342 [Accessed on March 2010]. 146. Rubenstein, C., 1976. An Analysis of Tool Life Based on Flank-Face Wear—Part 1: Theory. Journal Manufacturing Science Engineering, 98, pp. 221–226. 147. Sai, P.V., Madhukar, S., Reddy, M.K.P., Rao, R., 2017. A Review on Machinability Aspects of Titanium Grade-2. International Journal of Scientific Research in Science, Engineering and Technology, 3, pp. 270-275. 148. Saleem, W., Zain-ul-abdein, M., Ijaz, H., Abdullah Salmeen Mahfouz, A.S., Ahmed, A., Asad, M., Mabrouki, T., 2017. Computational Analysis and Artificial Neural Network Optimization of Dry Turning Parameters-AA2024-T351. Applied Sciences 7, pp. 1-21. 149. Samant, A.N., Dahotre, N.B., 2010. Three-dimensional Laser Machining of Structural Ceramics. Journal of Manufacturing Processes, 12, pp. 1-7. 150. Sathish, S., Parthiban, A., Balakrishna, R., Anandan, R., 2018. Development of ANN models for optimization of methane yield from floating dome digester. International Journal of Engineering & Technology, 7 (2.21), pp. 316-318. 151. Schulz, W., Simon, G., Urbassek, H.M., Decker, I., 1987. On Laser Fusion Cutting of Metals. Journal Physic D: Applied Physics, 20, pp. 481-488. 152. Sezer, H.K., Li, L., Leigh, S., 2009. Twin Gas Jet-Assisted Laser Drilling Through Thermal Barrier-Coated Nickel Alloy Substrates. International Journal of Machine Tools and Manufacture, 49, pp. 1126–1135. 153. Sezer, H.K., Li, L., Schmidt, M., Pinkerton, A.J., Anderson, B., Williams, P., 2006. Effect of Beam Angle on HAZ, Recast and Oxide Layer Characteristics in Laser Drilling of TBC Nickel Superalloys. International Journal of Machine Tools and Manufacture, 46, pp. 1972–1982. 154. Shang-Liang, C., 1998. The Effects of Gas Composition on the CO2 Laser Cutting of Mild Steel. Journal of Materials Processing Technology, 73, pp. 147–159. 155. Shirakashi, T., Usui, E., 1974. Simulation Analysis of Orthogonal Metal Cutting Mechanism, In: Proceedings of the First International Conference on Production Engineering, Part I. pp. 535–540. 156. Simon, K., Derzija, B.H., Matej, P., Mirko, F., Ahmet, C., Maida, C.H., 2015. Prediction of Laser Cut Quality for Tungsten Alloy Using the Neural Network Method. Journal of Mechanical Engineering, 61 (12), pp. 714-720. 157. Singh, S.C., Zeng, H.B., Chunlei, G., Weiping, C., 2012. Lasers: Fundamentals, Types, and Operations. In Nanomaterials: Processing and Characterization with Lasers (Singh, S.C., Zeng, H.B., Chunlei, G., Weiping, C., First ed.), pp. 1-34. Germany: Wiley-VCH. 158. Sivarao, Brevern, P., El-Tayeb, N.S.M., Vengkatesh, V.C., 2009. Modeling, Testing and Experimental Validation of Laser Machining Micro Quality Response by Artificial Neural Network. International Journal of Engineering and Technology IJET-IJENS 09 (09), pp. 24-29. 159. Sivarao, Peter, B., El-Tayeb, N.S.M., Vengkatesh, V.C., 2010. Neural Network Multi- Layer Perceptron Modeling for Surface Quality Prediction in Laser Machining. In Application of Machine Learning, pp. 51-62. Croatia: IntechOpen. 160. Sivarao, Shukor, Anand T.J.S., Ammar, 2010. DOE Based Statistical Approaches in Modeling of Laser Processing – Review & Suggestion. International Journal of Engineering and Technology IJET-IJENS Vol: 10 No: 04, pp. 1-8. 161. Soo, S.C., 2010. An Artificial Neural Network Approach for Soil Moisture Retrieval Using Passive Microwave Data. Doctor of Philosophy. Curtin University of Technology, Perth, Australia. Available from: http://users.monash.edu.au/~jpwalker/theses/SooSeeChai.pdf. [Accessed on: 17 May 2018]. 162. Srijib, Kr., Dhara, A.S., Kuar, S., Mitra, 2008. An Artificial Neural Network Approach on Parametric Optimization of Laser Micro-Machining Of Die-Steel. International Journal Advanced Manufacturing Technology, 39, pp. 39-46. 163. Star, R., 2017. 5 Factors Affecting Manufacturing Costs. [online] Available at: https://www .starrapid.com/blog/5-things-that-will-impact-your-manufacturing-costs/ [Accessed on 18 November 2018]. 164. Stournaras, A., Stavropoulos, P., Salonitis, K., Chryssolouris, G., 2009. An Investigation of Quality in CO2 Laser Cutting of Aluminum. CIRP Journal of Manufacturing Science and Technology, 2, pp. 61–69. 165. Subramonian, S.R., Khalim, A.Z., Hussein, N. I. S, Izamshah, R., Amran, M., Hadzley, M.,2012. Transforming Linear Laser Cutting machine Into Laser Lathing – An Empirical Investigation & Evaluation of Roundness Quality. Journal of Current Engineering Research, 2 (2), pp. 98-104. 166. Tai, C.C, Darling, R.B., 2007. Laser Micromachining of The Materials Using in Microfluidics By High Precision Pulsed Near And Mid-Ultraviolet Nd:YAG Lasers. Journal of Materials Processing Technology, pp. 1-6. 167. Tan, B., Venkatkrishnan, K., Sivakumar, N.R., Gan, G.K., 2003. Laser Drilling of Thick Material Using Femtosecond Pulse with a Focus of Dual-Frequency Beam. Optics & Laser Technology, 35, pp. 199 – 202. 168. Taylor, F.W., 1907. On The Art of Cutting Metals. Transaction ASME, 28, pp. 31–350. 169. Tijana, R., Irena, K.V, Marko, J., Biljana, J.S, Darko, I., 2014. Comparison of Full Factorial Design, Central Composite Design, and Box-Behnken Design in Chromatographic Method Development for the Determination of Fluconazole and Its Impurities. Analytical Letters, 47, pp. 1334–1347. 170. Trent, E.M., Wright, P.K., 2000. Metal cutting, 3rd ed., United Kingdom: Butterworth- Heinemann. 171. TRUMPF, 2000. Laser Processing: Chapter 2-TLF Laser in Material Machining, 10th ed., pp. 2-1 – 2-13. 172. Tsoukantas, G., Salonitis, K., Stavropoulos, P., Chryssolouris, G., 2003. An Overview of 3D Laser Materials' Processing Concepts. In: Alexis Carabelas, Giuseppe Baldacchini, Paolo Di Lazzaro, Dimitrios Zevgolis, Proceeding of Third GR-I International Conference on New Laser Technologies and Applications. SPIE publisher. 173. Twomey, J.M, 1996. Validation and Verification. [online] Available at: https:// pdfs.semanticscholar.org/8a47/7f1a733edb8c5bee297de7f90b2dc7ac1ce2.pdf [Accessed on 15 January 2019]. 174. Ulas, C., Ahmet, H., 2008. Use of the Grey Relational Analysis to Determine Optimum Laser Cutting Parameters with Multi-Performance Characteristics. Optics & Laser Technology, 40, pp. 987–994. 175. Ulutan, D., 2013. Predictive Modeling And Multi-Objective Optimization Of Machining- Induced Residual Stresses: Investigation Of Machining Parameter Effects. Doctoral Thesis, the State University of New Jersey. 176. Uppal, N., Shiakolas, P.S., Rizwan, M., 2008. Three Dimensional Waveguide Fabrication in PMMA Using Femtosecond Laser Micromachining System. In: Mary-Ann Maher, Jung- Chih Chiao, Paul J. Resnick, Proceeding of Micromachining and Microfabrication Process Technology XIII, San Jose, CA, USA, 22 January 2008. SPIE publisher. 177. Wang, X., Feng, C.X., 2002. Development of Empirical Models for Surface Roughness Prediction in Finish Turning. International Journal Advanced Manufacturing Technology, 20, pp. 348–356. 178. Wee, L.M., Crouse, P.L., Li, L., 2008. A Statistical Analysis of Striation Formation during Laser Cutting of Ceramics. International Journal Advance Manufacturing Technology, 36, pp. 699–706. 179. Woo, C.C. and George, C., 1995. Analysis of the Laser Grooving and Cutting Processes. 180. Journal of Physics D: Applied Physics, 28 (5), pp. 873-878. 181. Yilbas, B.S., 2004. Laser Cutting Quality Assessment and Thermal Efficiency Analysis. Journal of Materials Processing Technology, 155–156, pp. 2106–2115. 182. Yilbas, B.S., 1996. Experimental Investigation into CO2 Laser Cutting Parameters. Journal of Materials Processing Technology, 58, pp. 323-330. 183. Yilbas, B.S., Arif, A.F.M., 2011. Laser Cutting of Steel and Thermal Stress Development. Optics & Laser Technology, 43, pp. 830–837. 184. Yilbas, B.S., Arif, A.F.M., AbdulAleem, B.J., 2010. Laser Cutting of Sharp Edge: Thermal Stress Analysis. Optics and Lasers in Engineering, 48, pp. 10–19. 185. Yong-Qiang, Z., Yan-Hua W., Wu-Zhu C., Xu-Dong Z., Yan, Q., 2006. Effect of Laser Beam Attitude on 3D Laser Cutting Quality. Chinese Journal of Lasers 33, pp. 124-127. 186. Yoshiyuki, K., Akihiro, K., Keita, Y., 2010. Various Kinds of Pulsed Ultraviolet Laser Micromachinings Using a Five Axis Microstage. Journal of Laser Micro/Nanoengineering, 5, (2) pp. 163-168. 187. Young, H.-T., Lin, F.-F., Hong, S.-B., 2008. Novel Approach to Fabrication of 3D Micro- Structures by Laser Machining. Key Engineering Materials 364-366 I, pp. 19-24. 188. Yusliza, Y., Azlan, M.Z., Safian, S., Roselina, S., 2016. Potential ANN Prediction Model for Multiperformances WEDM on Inconel 718. Neural Computing & Application 30 (7), pp. 2113-2127. 189. Yuvraj, K., Madhukar, Suvradip, M., Ashish, Nath, K., 2016. A Study on Co-Axial Water- Jet Assisted Fiber Laser Grooving of Silicon. Journal of Materials Processing Technology, 227, pp. 200-215. 190. Zafer, C., Adnan F.K., 2017. A Study of Artificial Neural Network Training Algorithms for Classification of Cardiotocography Signals. Journal of Science and Technology, 7 (2), pp. 93-103. 191. Zhou, R., Li, E., Li, H., Wang, P., Yao, J., 2006. Continuous-wave, 15.2 W Diode-end Pumped Nd:YAG Laser Operating at 946 nm. Optics Letters. 31, No.12.