Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters

Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters

Wireless Sensor Network (WSN) consists of a large number of spatially distributed low-power autonomous nodes equipped with sensors to cooperatively monitor the environmental conditions. The limited battery lifespan that is being used by a sensor node is the major bottleneck that restricts the extens...

Full description

Saved in:
Bibliographic Details
Main Author: Abdal-Kadhim., Ali Mohammed
Format: Thesis
Language:English
English
Published: 2020
Subjects:
T Technology (General)
Online Access:http://eprints.utem.edu.my/id/eprint/25536/1/Design%20and%20Modelling%20of%20an%20Energy%20Aware%20Dynamic%20Management%20for%20Wireless%20Sensor%20Node%20with%20Dual%20Harvesters.pdf
http://eprints.utem.edu.my/id/eprint/25536/2/Design%20and%20Modelling%20of%20an%20Energy%20Aware%20Dynamic%20Management%20for%20Wireless%20Sensor%20Node%20with%20Dual%20Harvesters.pdf
Tags: Add Tag
No Tags, Be the first to tag this record!
id my-utem-ep.25536
record_format uketd_dc
institution Universiti Teknikal Malaysia Melaka
collection UTeM Repository
language English
English
advisor Kok, Swee Leong
topic T Technology (General)
T Technology (General)
spellingShingle T Technology (General)
T Technology (General)
Abdal-Kadhim., Ali Mohammed
Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters
description Wireless Sensor Network (WSN) consists of a large number of spatially distributed low-power autonomous nodes equipped with sensors to cooperatively monitor the environmental conditions. The limited battery lifespan that is being used by a sensor node is the major bottleneck that restricts the extension of WSN application for its scalability and sustainability. Thus, the energy consumption efficiency remains the most prominent design criterion that need to be addressed urgently. There are two main research concerns on the energy-harvesting powered WSN, firstly is to reduce the node power consumption and the, secondly is to increase the harvesters' power to meet the minimum requirement of the node power consumption. In another word, it is to reduce the mismatch of the supply and demand of the node electrical power. Thus, an energy aware dynamic management model for wireless sensor node powered by dual harvesters is presented to deal with the mismatch. The first step of the research is to investigate the node power consumption profile. This is followed by investigating the electrical power supplies which are based on thermoelectric and piezoelectric as Hybrid Energy Harvesting (I-EH). The node is designed with a built-in main and backup energy storages to overcome the HEH energy gap issue. It features fast start up using a small capacitive energy storage as the main instantaneous power source. Whilst for wider energy gap coverage, a larger capacitance is used as the backup energy storage. To reduce the power consumption while not compromising the integrity of the signal transmission, the sensor node is improved with a novel energy-aware Event-Priority-Driven Dissemination (EPDD) algorithm. It is developed to make the sink station able to detect a missing node within the network. The function of the algorithm is to detect the energy sources availability and control the nodes' sleeping period accordingly. The empirical power profiling for each node and at system level were measured during active and sleep modes, which provides a useful data for designing low-power wireless sensor node. The node is designed and modelled using Matlab Simulink 2016 environment. The simulation results show an improvement in the node start-up time of less than 30s only with 48 hours of energy gap coverage, which is theoretically long enough to ensure that the node stayed active until the next phase of ambient energy to be available again. The experimental results are in good agreement with the simulation model. It is also found that the RF transceiver consumed the highest power of 24mW, followed by the microcontroller with 7.5mW and the sensor module with O. 16mW throughout the active period. During the sleep period, however, the microcontroller consumed a noticeable amount of power of 1.8mW compared to the other sensor node components. Moreover, it shows that energy at ideal cases where both energy harvesters, I-EH are operating at the same time, a power in the range of around 90 mW is generated which is more than enough to achieve the minimum requirement to operate a sensor node.
format Thesis
qualification_name Doctor of Philosophy (PhD.)
qualification_level Doctorate
author Abdal-Kadhim., Ali Mohammed
author_facet Abdal-Kadhim., Ali Mohammed
author_sort Abdal-Kadhim., Ali Mohammed
title Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters
title_short Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters
title_full Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters
title_fullStr Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters
title_full_unstemmed Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters
title_sort design and modelling of an energy aware dynamic management for wireless sensor node with dual harvesters
granting_institution Universiti Teknikal Malaysia Melaka
granting_department Faculty of Electronics and Computer Engineering
publishDate 2020
url http://eprints.utem.edu.my/id/eprint/25536/1/Design%20and%20Modelling%20of%20an%20Energy%20Aware%20Dynamic%20Management%20for%20Wireless%20Sensor%20Node%20with%20Dual%20Harvesters.pdf
http://eprints.utem.edu.my/id/eprint/25536/2/Design%20and%20Modelling%20of%20an%20Energy%20Aware%20Dynamic%20Management%20for%20Wireless%20Sensor%20Node%20with%20Dual%20Harvesters.pdf
_version_ 1747834136952832000
spelling my-utem-ep.255362022-01-06T11:26:50Z Design and Modelling of an Energy Aware Dynamic Management for Wireless Sensor Node with Dual Harvesters 2020 Abdal-Kadhim., Ali Mohammed T Technology (General) TK Electrical engineering. Electronics Nuclear engineering Wireless Sensor Network (WSN) consists of a large number of spatially distributed low-power autonomous nodes equipped with sensors to cooperatively monitor the environmental conditions. The limited battery lifespan that is being used by a sensor node is the major bottleneck that restricts the extension of WSN application for its scalability and sustainability. Thus, the energy consumption efficiency remains the most prominent design criterion that need to be addressed urgently. There are two main research concerns on the energy-harvesting powered WSN, firstly is to reduce the node power consumption and the, secondly is to increase the harvesters' power to meet the minimum requirement of the node power consumption. In another word, it is to reduce the mismatch of the supply and demand of the node electrical power. Thus, an energy aware dynamic management model for wireless sensor node powered by dual harvesters is presented to deal with the mismatch. The first step of the research is to investigate the node power consumption profile. This is followed by investigating the electrical power supplies which are based on thermoelectric and piezoelectric as Hybrid Energy Harvesting (I-EH). The node is designed with a built-in main and backup energy storages to overcome the HEH energy gap issue. It features fast start up using a small capacitive energy storage as the main instantaneous power source. Whilst for wider energy gap coverage, a larger capacitance is used as the backup energy storage. To reduce the power consumption while not compromising the integrity of the signal transmission, the sensor node is improved with a novel energy-aware Event-Priority-Driven Dissemination (EPDD) algorithm. It is developed to make the sink station able to detect a missing node within the network. The function of the algorithm is to detect the energy sources availability and control the nodes' sleeping period accordingly. The empirical power profiling for each node and at system level were measured during active and sleep modes, which provides a useful data for designing low-power wireless sensor node. The node is designed and modelled using Matlab Simulink 2016 environment. The simulation results show an improvement in the node start-up time of less than 30s only with 48 hours of energy gap coverage, which is theoretically long enough to ensure that the node stayed active until the next phase of ambient energy to be available again. The experimental results are in good agreement with the simulation model. It is also found that the RF transceiver consumed the highest power of 24mW, followed by the microcontroller with 7.5mW and the sensor module with O. 16mW throughout the active period. During the sleep period, however, the microcontroller consumed a noticeable amount of power of 1.8mW compared to the other sensor node components. Moreover, it shows that energy at ideal cases where both energy harvesters, I-EH are operating at the same time, a power in the range of around 90 mW is generated which is more than enough to achieve the minimum requirement to operate a sensor node. 2020 Thesis http://eprints.utem.edu.my/id/eprint/25536/ http://eprints.utem.edu.my/id/eprint/25536/1/Design%20and%20Modelling%20of%20an%20Energy%20Aware%20Dynamic%20Management%20for%20Wireless%20Sensor%20Node%20with%20Dual%20Harvesters.pdf text en public http://eprints.utem.edu.my/id/eprint/25536/2/Design%20and%20Modelling%20of%20an%20Energy%20Aware%20Dynamic%20Management%20for%20Wireless%20Sensor%20Node%20with%20Dual%20Harvesters.pdf text en validuser https://plh.utem.edu.my/cgi-bin/koha/opac-detail.pl?biblionumber=119763 phd doctoral Universiti Teknikal Malaysia Melaka Faculty of Electronics and Computer Engineering Kok, Swee Leong 1. Aalsalem, M.Y., Wazir, Z.K., Wajeb, G., Muhammad, K.K., and Quratulain, A., 2018. Wireless Sensor Networks in Oil and Gas Industry: Recent Advances, Taxonomy, Requirements, and Open Challenges. Journal of Network and Computer Applications,(Early Access), DOI: 10.1016/j.jnca.2018.04.004. 2. Aayushi, M., Suhaib, A., Swastik, G., and Ashish, S., 2014. Comparative Analysis of Different Data Dissemination Strategies in Wireless Sensor Networks. International Journal of Advanced Research in Computer and Communication Engineering,3(4), pp. 6350-6354. 3. Abbaspour, R., 2010. A Practical Approach to Powering Wireless Sensor Nodes by Harvesting Energy from Heat Flow in Room Temperature. International Congress on Ultra Modern Telecommunications and Control Systems, Moscow, Russia, pp. 178-181. 4. Accardi, K., and Yates, A., 2014. Powertop User’s Guide, Intel Corporation, pp. 1-10. DOI: https://01,org/sites/default/files/page/powertop_users_guide_201412.pdf. 5. Adam, B.N., Abderrazak, A., Tarek, E., Mohamed, H.A., Ahmed, B., and Mohamed, S., 2017. Structural Health Monitoring Using Wireless Sensor Networks: A Comprehensive Survey. IEEE Communications Surveys and Tutorials,19(3), pp. 1403-1423. 6. Adolph, S.,Tejas, S., Lukas, S., Yu, L., and Martin, R., 2018. Power Profiling of Multimedia Sensor Node with Name-Based Segment Streaming. Multimedia Tools Application, 77(16), pp. 21417-21443. 7. Aimtec Inc., 2012. Connecting AC-DC and DC-DC Power Converters in Parallel. Application Note, Aimtec, pp. 1-2. DOl: Available at: http://aimtec.com/site/Aimtec/files/ documents/ApplicationNotes/connecting%20converters%20in%20parallel.pdf. 8. Alexander, C., and Sadiku, M., 2017. Fundamentals of Electric Circuits. 411' Ed. New York: McGraw-hill Education. 9. Almeida, C.H.A., Cicero, R.S.J., and Oliveira, C., 2015. Characterization of Thermoelectric Cell for Electric Power Generation. IEEE International Instrumentation and Measurement Technology Conference (12KJTC) Proceedings, Pisa, Italy, pp. 11-14. 10. Aloulou, R., Lucas, D.P., Mnifa. H., Alicalapab, F., Lan, S.L., and Louloua, M., 2015. A Power Management System for Energy Harvesting and Wireless Sensor Networks Application Based on a Novel Charge Pump Circuit. International Journal of Electronics, pp. 1-12. doi:10.1080/00207217.2015.1072848. 11. Amat, A., Sosuke, A., Shintaro, S., Seiji, H., Bunji, H., and Kenji, S., 2015. Evaluation on Mechanical Impact Parameters in Piezoelectric Power Generation. 10th Asian Control Conference (ASCC), Kota Kinabalu. 12. Amit S., Kshitij, S., Neelam, S., and Raghuvir, S., 2011. Energy Management for Wireless Sensor Network Nodes. International Journal of Advances in Engineering and Technology, 1(2011), pp. 7-13. 13. AN3147 Application Note, 2013. Power Management in STM8L and STM8AL. DocID17035 Rev 3. STMicroelectronics, pp. 1-25. DOI: https://www.st.com/content/ccc/resource/technical/document/application__note/a2/f6/c5/cf/e0/58/42/e5/CD00263631.pdf/fil es/CD00263631.pdf/jcr:content/translations/en.CD00263631.pdf. 14. Ando, B., Baglio, S., Marietta, V., Pistorio, A., and Bulsara, A.R., 2017. Preliminary Investigation of a Mixed Inductive Piezoelectric Energy Harvester from Human Walking. IEEE Sensors Applications Symposium (SAS),Glassboro, NJ, USA, pp. 13-15. 15. Aranguren, P., Astrain, D., Rodriguez, A., and Martinez, A., 2015. Experimental Investigation of the Applicability of a Thermoelectric Generator to recover waste heat from a Combustion Chamber. Applied Energy, 152(2015), pp. 121-130. 16. Arko, D., Arsi, A., Rusman, R., and Erikson, S., 2011. Monitoring Vibration of a Model of Rotating Machine. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 02(1), pp. 51-56. 17. Assis, A. and Karam, R., 2018. The free fall of an apple: conceptual subtleties and implications for physics teaching. European Journal of Physics,39(3), pp. 35-40. Atzori, L., Iera, A., and Morabito, G., 2010. The Internet of Things: A survey. Computer Networks, 54(15), pp. 2787-2805. 18. Ayesha, S., Mehebub, A., Tapas, R.M., and Dipankar, M., 2018. A Pyroelectric Generator as a Self-Powered Temperature Sensor for Sustainable Thermal Energy Harvesting from Waste Heat and Human Body Heat. Applied Energy, 221(2018), pp. 299-307. 19. Banas, T., 2019. How to Calculate Force of Impact. Sciencing, pp. 1-2. DOI: https://sciencing.com/calculate-force-impact-7617983.html. 20. Barsali, S., and Ceraolo, M., 2002. Dynamical Models of Lead-Acid Batteries: Implementation Issues. IEEE Transactions on Energy Conversion, 17(1), pp. 16-23. 21. BCAP0350, 2017. Datasheet, Maxwell Technologies, pp. 1-10. DOI: http://www.maxwell.com. 22. Beeby S.P., Tudor M.J., and White, N., 2006. Energy Harvesting Vibration Sources for Microsystems Applications. Measurement Science and Technology, 17(12), pp. 175-195. 23. Beeby, S., and White, N., 2010. Wireless Devices and Sensor Networks: Energy Harvesting for Autonomous Systems. 1st ed. United States of America: Artech House. Benghanem, M., Al-Mashraqi, A.A., and Daffallah, K.O., 2016. Performance of Solar Cells using Thermoelectric Module in Hot Sites. Renewable Energy,89(2016), pp. 51-59. 24. Berdy, D.F., Jung, B., Rhoads, J.F., and Peroulis, D., 2012. Wide-Bandwidth, Meandering Vibration Energy Harvester with Distributed Circuit Board Inertial Mass. Sensors and Actuators A: Physical, 188(12), pp. 148-157. 25. Beretta, D., Neophytou, N., Hodges, J., Kanatzidis, M., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., Zevalkink, A., Hofmann, A., Muller, C., Dorling, B., Campoy-Quiles, M. and Caironi, M. 2018. Thermoelectrics: From history, a window to the future. Materials Science and Engineering: R: Reports, pp. 1-47, In press. DOI: https://d0i.0rg/l 0.1016/j.mser.2018.09.001. 26. Bobean, C., and Pavel, V., 2013. The Study and Modeling of a Thermoelectric Generator Module. 8th International Symposium on Advanced Topics in Electrical Engineering (ATEE), Bucharest, Romania, pp. 23-25. 27. Bong, Y.J., and Kok, S.L., 2013. Demonstration of Self-Powered Accelerometer Using Piezoelectric Micro-Power Generator. IEEE Student Conference on Research and Development. Putrajaya, Malaysia. 28. Cady, W. 1964. Piezoelectricity. New York: McGraw-Hill: Dover Pubns. 29. Ceraolo, M., Lutzemberger, G., and Huria, T., 2011. Experimentally- Determined Models for High-Power Lithium Batteries. Advanced Battery Technology, SAE, April 2011. ISBN: 978-0-7680-4749-3. DOI: 10.4271/2011-01-1365. 30. Chai, R., and Ying, Z., 2015. A Practical Supercapacitor Model for Power Management in Wireless Sensor Nodes. IEEE Transactions on Power Electronics, 30(12), pp. 6720-6730. 31. Chan, H., Min, S.W., Yewon, S., Jong, H.E., Jeong, H.K., Gyeong, J.S., Seong, K.H., Tae, H.S., Ji, Y.C., and Seung, K.R., 2016. Development of Impact-Based Piezoelectric Road Energy Harvester for Practical Application. International conference on renewable energy research and applications, Birmingham, UK, pp. 20-23. 32. Chaudhari, M., Koleva, P., Paulkov, V., and Deshpande, V., 2017. Energy Efficient Reliable Data Transmission in Resource Constrained Ad-Hoc Communication Networks. Global Wireless Summit. Cape Town, South Africa, pp. 17-21. 33. Chen, B., 2019. Introduction to Energy Harvesting Transducers and Their Power Conditioning Circuits. Is* ed. Springer. 34. Chen, J., Jackson, K„Wu, Y.J, Xing, S.X., Robert, F., Michael, H., and Zuo, L., 2016. A Thermoelectric Energy Harvesting System for Powering Wireless Sensors in Nuclear Power Plants. IEEE Transactions on Nuclear Science,63(5), pp. 2738-2746. 35. Chen, M., Yu, H., Wang, G. and Lian, Y. 2019. A Batteryless Single-Inductor Boost Converter with 190 mV Self-Startup Voltage for Thermal Energy Harvesting Over a Wide Temperature Range. IEEE Transactions on Circuits and Systems II: Express Briefs, 66(6), pp. 889-893. 36. Chiang, S.Y., Yi-Chen, H., and Yao-Chiang, K., 2016. A Power Scheme of a Wireless Sensor Network Node for Debris Flow Monitoring with Move-Triggered Wake-Up. Journal of the Chinese Institute of Engineers, 39(7), pp. 841-849. 37. Cipollone, R., Battista, D., and Mauriello, M., 2015. Effects of Oil Warm Up Acceleration on the Fuel Consumption of Reciprocating Internal Combustion Engines. 70th Conference of the ATI Engineering Association, Roma, pp. 1-8. 38. Cong, W.,Ji, L., Yuanyuan, Y., and Fan, Y., 2018. Combining Solar Energy Harvesting with Wireless Charging for Hybrid Wireless Sensor Networks. IEEE Transactions on Mobile Computing, 17(3), pp. 560-576. 39. Dalola, S., Vittorio, F., Michele, G., Daniele, M., Emilio, S., Emilio, S., Mauro, S., and Andrea, T., 2009. Autonomous Sensor System with Power Harvesting for Telemetric Temperature Measurements of Pipes. IEEE Transactions on Instrumentation and Measurement,58(5), pp. 1471-1478. 40. Damaschke, J.M., 1997. Design of a Low Input Voltage Converter for Thermoelectric Generator. IEEE Transactions on industry applications, 33(5), pp. 1203-1207. 41. Deng, F., Yue, X., Fan, X., Guan, S., Xu, Y., and Chen, J., 2018. Multisource Energy Harvesting System for a Wireless Sensor Network Node in the Field Environment. IEEE Internet of Things Journal, (Early Access), DOI 10.1109/JIOT.2018.2865431. 42. Derr, K., and Milos, M., 2015. Wireless Sensor Networks-Node Localization for Various Industry Problems. IEEE Transactions on Industrial Informatics, 11(3), pp. 752-762. 43. Dewesoft, 2019. Accelerometers and Modal Hammers. [On-line] Available at: https://www.polytec.com/eu/vibrometry/products/single-point-vibrometers/pdv-100- portable-digital-vibrometer/ [Accessed on 9 May 2018]. 44. Dias,J.P.C., Morais, F.J.O., Fran?a, M.B., Elnatan,C.F., Andreu,C., and Jose,A.S.D., 2015. Autonomous Multisensor System Powered by a Solar Thermoelectric Energy Harvester with 222 Ultralow-Power Management Circuit. IEEE Transactions on Instrumention and Measurement Measurement, 64(11 ), pp. 2918-2925. 45. Dong, C., Li, S., Han, R., He, Q., Li X anD A Xu, D., 2019. Self-powered wireless sensor network using event-triggered energy harvesters for monitoring and identifying intrusion activities. 1ET Power Electronics, 12(8), pp. 2079-2085. 46. Dong, C., Li, S., Li, M., He, Q„Xu, D„and Li, X., 2016. Self-Powered Event-Triggered Wireless Sensor Network for Monitoring Sabotage Activities. IEEE Sensors,Orlando, USA, pp. 1-3. 47. Donga, X., Jijian, L., and Haijun, W., 2019. Vibration Source Identification of Offshore Wind Turbine Structure based on Optimized Spectral Kurtosis and Ensemble Empirical Mode Decomposition. Ocean Engineering, 172(2019), pp. 199-212. 48. Donglai, G., Wen, C., Run, Z., Ye, H., and Hui, L., 2019. Multi-Modal Vortex- and RainWind- Induced Vibrations of an Inclined Flexible Cable. Mechanical Systems and Signal Processing, 118(2019). pp. 245— 258. 49. Dutta, P„Feldmeier, M„Paradiso, J., and Culler, D„2008. Energy Metering for Free: Augmenting Switching Regulators for Real-Time Monitoring. Information Processing in Sensor Networks. 50. Einhom, M., Fiorentino, V.C., Christian, K., and parameterization of electrical battery and Jurgen, F., 2013. Comparison, selection, models for automotive applications, IEEE Transactions on Power Electronic, 28(3), PP- 1429-1437. 51. Faheem, M., and Gungor, V.C., 2018. Energy Efficient And QOS-Aware Routing Protocol for Wireless Sensor Network-Based Smart Grid Applications in the Context of Industry 4.0. Applied Soft Computing, 68(2018), pp. 910-922. 52. Faisal, A., Gert, T., Yannick, L.M., and Paul, A., 2018. Adaptive LINE-P: An Adaptive Linear Energy Prediction Model for Wireless Sensor Network Nodes. Sensors, 18(4), pp. 1- 26. 53. Fan, K., Qinxue, T., Haiyan, L., Yiwei, Z., and Meiling, C., 2019. Improved Energy Harvesting from Low-Frequency Small Vibrations Through a Monostable Piezoelectric Energy Harvester. Mechanical Systems and Signal Processing, 117(2019), pp. 594-608. 54. Farhan, I., and Pai, H.C., 2008. Efficient Charging of Supercapacitorsfor Extended Lifetime of Wireless Sensor Nodes. IEEE Transactions on Power Electronics, 23(3), pp. 1526-1536. 55. Fauzi, and Kok, 2011. Investigation of Useful Ambient Vibration Sources for the Application of Energy Harvesting. IEEE Student Conference on Research and Development, Cyberjaya, Malaysia. 56. Feenstra, J., Granstrom J., and Sodano, H., 2008. Energy Harvesting Through a Backpack Employing a Mechanically Amplified Piezoelectric Stack. Mechanical Systems and Signal Processing. 22(3), pp. 721-734. 57. Ferrari, M., Bau, M., Cerini, F., and Ferrari, V., 2012. Impact-Enhanced Multi-Beam Piezoelectric Converter for Energy Harvesting in Autonomous Sensors. Procedia Engineering, 47, pp. 418-421. 58. Ferrari, M., Cerini F., and Ferrari, V., 2013. Autonomous Sensor Module Powered by Impact-Enhanced Energy Harvester from Broadband Low-Frequency Vibrations. 17th International Conference on Solid-State Sensors, Actuators and Microsystems, Barcelona, Spain, pp. 16-20. 59. Floyd, T., and Buchla, D., 2010. Electric Circuits Fundamentals. 3 rd ed. Boston: Prentice Hall. Freunek, M., Muller, M., Ungan, T., Walker, W., and Reindl, L., 2009. New Physical Model for Thermoelectric Generators. Journal of Electronic Materials, 38(7), pp. 1214-1220. 60. Frick, V., Poure, P., Hebrard, L., Anstotz, F., and Braun, F., 2007. Electromagnetically Compatible CMOS Auto-Balanced Current Sensor for Highly Integrated Power Control System-On-Chip. International Journal of Electronics, 94(1), pp. 9-22. 61. Fukuda, K., Osamu, T., Shirai, K., Ohta, M., Fujii, T., Sasamori, F., and Handa, S., 2018. Transmit Control and Data Separation in Physical Wireless Parameter Conversion Sensor Network with Event Driven Sensors. IEEE Topical Conference on Wireless Sensors and Sensor Networks. Anaheim, California, United States of America, pp. 10-14. 62. GangTang, Y., Cheng, H., Guimiao, L., Jingquan, L., Xiang, C., and Chunsheng, Y., 2016. A Piezoelectric Micro Generator Worked at Low Frequency and High Acceleration Based on PZT and Phosphor Bronze Bonding. Scientific Reports, 8(6), DOI: 10.1038/srep38798. 63. Ganhua, X., Pei, L., Zhen, Z., Kai, X., Xiang-Yu, K., Liping, W., and Lei, J., 2018. SkinInspired Low-Grade Heat Energy Harvesting Using Directed Ionic Flow through Conical Nanochannels. Advance Energy Material,8(22), pp. 1-6. 64. Guilherme, C„Alfredo, G., Ignacio, B., Pedro, R., Jose, L., and Javier, T., 2013. Power Measurement Methods for Energy Efficient Applications. Sensors, 13(6), pp. 7786-7796. 65. Guyomar, and Lallart, 2008. An Optimized Self-Powered Switching Circuit for Non-Linear Energy Harvesting with Low Voltage Output Smart Mater. Smart Materials and Structures. 17(3), pp. 1-6. 66. Guyomar, Lefeuvre, E., Badel, A., Richard, C., and Petit, L., 2006. A Comparison between Several Vibration-Powered Piezoelectric Generators for Standalone Systems Sensors Actuators. Sensors and Actuators A, 126 (2006), pp. 405-416. 67. Hahm, O., and Stephan, A., 2012. Profiling Energy Consumption of Wireless Sensor Nodes with Almost Zero Effort. International Workshop on Novel approaches to Energy Measurement and Evaluation in Wireless Networks. Ottawa, ON, Canada. 68. Haito, X., Cheng, L., and Harutoshi, O., 2017. A New Low-Power Wireless Sensor Network for Real-Time Bridge Health Diagnosis System. 56th Annual Conference of the Society of Instrument and Control Engineers of Japan. Kanazawa, Japan, pp. 1565-1568. 69. Hajati, A., and sang, G., 2011. Ultra-Wide Bandwidth Piezoelectric Energy Harvesting. Applied physics letters, 99(8), pp. 1-4. 70. Hanly, S., 2016. Shock & Vibration Testing Overview. Mide Technology, pp. 1-69. DOI: https://info.mide.com/data-loggers/shock-vibration-testing-overview-ebook. Hanna Instruments, 2019. Hanna Instruments Thermometer datasheets,[on-line] Available at: https://hannainst.com/hi93552r-dual-channel-k-j-t-type-thermocouplethermometer.html [Accessed on 28 June 2017]. 71. Hao, J., Jingjing, Z., Dereje, D., Zhaoling, L., and Jiansheng, G., 2018. Solar Thermal Energy Harvesting Properties of Spacer Fabric Composite Used for Transparent Insulation Materials. Solar Energy Materials and Solar Cells, 174(2018), pp. 140-145. 72. Harte, S., O’Flynn, B., Martinez-Catala, R., and Popovici, E., 2007. Design and Implementation of a Miniaturised, Low Power Wireless Sensor Node. 18th European Conference on Circuit Theory and Design.Seville, Spain, pp. 27-30. 73. Hartung, R., Kulau, U., and Wolf, L., 2016. Distributed Energy Measurement in WSNs for Outdoor Applications. IEEE Sensing, Communication, and Networking. 74. He, H., Xiong, R., and Fan, J., 2011. Evaluation of lithium-ion battery equivalent circuit models for state of charge estimation by an experimental approach. Energies. 4 (2011), pp. 582-598, doi:http://dx.doi.org/10.3390/en4040582. 75. He, S.,Jiming, C., Fachang, J., Yau, D.K.Y., Guoliang, X., and Youxian, S., 2013. Energy Provisioning in Wireless Rechargeable Sensor Networks. IEEE Transactions on Mobile Computing,12(10), pp. 1931-1942. 76. Hongyu, C., Zhijiang, X., Yanhua, S., Qin, L., and Zengzhen, M., 2010. Design and Implement of WSN Based on Bluetooth and Embedded System. International Conference on Computer Application and System Modeling. Shanxi, Taiyuan, pp. 641-644. 77. Hu, Y„Yang, J., Huang, Z., Sokolovskij, R., and Wang, F., 2017. Wireless Sensor Node with Hybrid Energy Harvesting for Air-Flow Rate Sensing. IEEE Sensors, Glasgow, UK, pp. 29-33. 78. Huyghe, B., Vanfleteren, J., and Doutreloigne, J., 2009. Design of Flexible, Low-Power and Wireless Sensor Nodes for Human Posture Tracking Aiding Epileptic Seizure Detection. IEEE Sensors, Christchurch, New Zealand, pp. 25-28. 79. Hwanjoo, P., Dongkeon, L., Gimin, P., Sungjin, P., Salman, K., Jiyong, K., and Woochul, K., 2019. Energy harvesting using thermoelectricity for IoT (Internet of Things) and E-skin sensors, Journal of Physics and Energy, in press https://doi.org/10.1088/2515-7655/ab2fle. 80. Ian, F.A., and Mehmet, C.V., 2011. Wireless Sensor Networks, 1 st ed., John Wiley & Sons Ltd. 81. Ibragimov, A., Hermann, P., Christoph, P., and Walter, L., 2012. A Thermoelectric Energy Harvester Directly Embedded Into Casted Aluminum. IEEE Electron Device Letters, 33(2), pp. 233-235. 82. Ikeda, S., and Kurokawa, F., 2017. Isolated and Wide Input Ranged Boost Full Bridge DC-DC Converter with Low Loss Active Snubber. IEEE Energy Conversion Congress and Exposition.Cincinnati, Ohio, USA, pp. 2213-2218. 83. Ilsche, T., Schone, R„Schuchart, J., Hackenberg, D„Simon, M„Georgiou, Y. and Nagel, 84. Povvei measurement techniques for energy-efficient computing: reconciling ty, resolution, and accuracy. SICS Software-Intensive Cyber-Physical Systems, 34( 1), pp. 45-52. 85. Inhao, M., Stroe, I., Ricco, M., Guangzhao, L., and Teodorescu. R., 2019. A Simplified Model based State-of-Charge Estimation Approach for Lithium-ion Battery with Dynamic Linear Model. IEEE Transactions on Industrial Electronics. (Early Access), DOI:10.1109/TIE.2018.2880668. 86. Isarakom, D., Briand, D., Janphuang, P., Sambri, A., Gariglio, S., Triscone, J., Guy, F., Reiner, J., and Ahn, C., 2010. Energy Harvesting Mems Device Based on an Epitaxial PZT Thin Film: Fabrication and Characterization. Power MEMS, 2010( 1), pp. 203-206. 87. Jaffe, B., 2014. Piezoelectric Ceramics. 1st ed., Saint Louis, Elsevier Science. 88. Jain, A., Shekhar, S., and Li, Z., 2017. Active and Passive Techniques for Noise Sensitive Circuits in Integrated Voltage Regulator Based Microprocessor Power Delivery. IEEE 67th Electronic Components and Technology Conference, Orlando, FL, USA, 2017, pp. 1688-1694. doi:10.1109/ECTC.2017.190. 89. James, J.C., and Stephen, A., 2016. Two Parameter Predictive Maintenance Program. White paper, 2016. 90. Janphuang, P., Isarakom, D., Briand, D., and Rooij, N.F., 2011. Energy Harvesting from a Rotating Gear Using an Impact Type Piezoelectric MEMS Scavenger. 16th International Solid-State Sensors, Actuators and Microsystems Conference, Beijing, China, pp. 5-9. 91. Janphuang, P., Robert, Don, I., Simon, H., Danick, B., and Nico, R., 2015. Harvesting Energy from a Rotating Gear Using an ATM-Like MEMS Piezoelectric Frequency UpConverting Energy Harvester. Journal of Microelectromechanical Systems, 24(3), pp. 1-6. 92. Jee, S., Lim, and Salman, L., 2018. Review of Vibration-Based Energy Harvesting Technology: Mechanism and Architectural Approach. International Journal of Energy Research, 42(5), pp. 1-28. 93. Jeong, H., Sung, J., Yewon, S., Chan, Y., Min, S., Kyeong, J., and Tae, H., 2016. Designing a Piezoelectric Energy Harvester Using diking Mechanism. IEEE International Conference on Renewable Energy Research and Applications, Birmingham, UK, pp. 20-23. 94. Jiang, X., Dutta, P., Culler, D., and Stoica, I., 2007. Micro Power Meter for Energy Monitoring of Wireless Sensor Networks at Scale. 6th International Conference Information Processing in Sensor Networks. Cambridge, MA, USA, pp. 25-29. 95. Jiang, X., Zou, X., and Zhang, M., 2017. Design and Analysis of a Multi-Step Piezoelectric Energy Harvester Using Buckled Beam Driven by Magnetic Excitation. Energy Conversation Management, 145(2017), pp. 129— 137. 96. Jiankai, L., 2015. 315MHz Simple RF Link Kit User Manual. SeeedStudio, pp. 1-11. 97. Jinchi, H., Jun, H., Yang Y.,Zhongxu, W., Shan, X.W., and Jinliang, H., 2015. A Nonintrusive Power Supply Design for Self Powered Sensor Networks in the Smart Grid by Scavenging Energy from AC Power Line. IEEE Transactions on Industrial Electronics, 62(7), pp. 4398-4407. 98. Jing, B.Y., and Leong, K.S., 2017. Investigation on Phase Shifting Effect on the Voltage Output of Piezoelectric Cantilever Array, lop Conference Series: Materials Science and Engineering. 210(2017) 99. Ju, H., and Zhang, R., 2014. Throughput Maximization in Wireless Powered Communication Networks. IEEE Transactions on Wireless Communications, 13(1), pp. 418-428. 100. Ju, S., and Chang, J., 2018. Impact-Based Piezoelectric Vibration Energy Harvester. Applied Energy, 214(2018), pp. 139-151. 101. Ju, S., and Ji, C.H., 2015. Indirect Impact Based Piezoelectric Energy Harvesting for Low Frequency Vibration. International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), Anchorage, Alaska, USA, pp. 21-28. 102. Kamel, L, and Junta, H„2011. A Lightweight Data Integrity Scheme for Sensor Networks. Sensors, 11(4), pp. 4118-4136. 103. Kapteina, G„2019. 77* Business Potentials oflnternet ofTMnSs » (IoT> forOrations. [On-line], Available at: https://gerno,kapteina,om/2015/08/3./iot-interne,-of.dti„ gs/ [Accessed on 1 August 2018]. 104. Kazem, S., Daniel, M., and Taieb, Z., 2007. Wireless Sensor Networks Technology, Protocols, and Applications, 1st ed., New York: John Wiley & Sons. 105. Khan, A., Bangash, I., Ahmed, A., and Abdullah, H., 2017. Query-Driven Virtual Grid Based Data Dissemination for Wireless Sensor Networks Using Single Mobile Sink. Wireless NetM >orks, pp. 1-13. D01.org/10.1007/sl 1276-017-1552-8, 2017. 106. Khonde, S., Ghatol, A., and Dudul, S., 2016. A Novel Approach towards Hardware and Software Co-Design Perspective for Low Power Communication Centric RF Transceiver in Wireless Sensor Node. International Conference on Communication and Electronics Systems, Coimbatore, India, pp. 21-26. 107. Kim, S., Park, H., Kim, H., Godfrey, D., and Kim, I., 2017. A Survey on Real-Time Communications in Wireless Sensor Networks. Wireless Communications and Mobile Computing, pp. 1— 14. doi:10.1155/2017/1864847. 108. Kishi, M., Nemoto, H., Hamao, T., Yamamoto, M., Sudou, S., Mandai, M., and Yamamoto, S., 1999. Micro-Thermoelectric Modules and Their Application to Wristwatches as an Energy Source. SEIKO Instruments, 18th, International Conference on Thermoelectrics, Baltimore, MD, USA. 109. Klein, J., Ramachandran, M., Kessel, T., Nair, D., Hinds, N., Hamann, H.F. and Sosa, N.E., 2018. Wireless Sensor Networks for Fugitive Methane Emissions Monitoring in Oil and Gas Industry. IEEE International Congress on Internet of Things, San Francisco, CA, USA, pp. 41-48. 110. Klein, W.P., 2019. Signal Chain Basics (Part 11): Introducing Voltage- and PowerConditioning Circuits.[On-line] Available at: https://www.eetimes.com/document.asp? doc _id=1272436 [Accessed on 5 June 2018]. 111. Kok, S., Jing, B.Y., and Abdal Kadhim, A.M., 2016. Low Frequency Broad-Band Hybrid Piezoelectric-Electromagnetic Vibration Energy Harvesting. International symposium on energy challenges and mechanics-towards a big picture, Scotland UK. pp. 14-18. 112. Kok, S.L., White, N., and Harris, N., 2011. Free-Standing Thick-Film Piezoelectric Cantilevers-Energy Harvesting. Saarbriicken: LAP LAMBERT Academic Publishing. 113. Kok, S.L., White, N., and Harris, N., 2011. Piezoelectricity in Free-Standing Thick-Film Piezoelectric Cantilever-Energy Harvesting. LAP LAMBERT Academic Publishing. 114. Koven, R., Matthew, Richard, and Burak, 2017. Low Frequency and Broadband Vibration Energy Harvesting Using Base Mounted Piezoelectric Transducers. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 64(11), pp. 1735-1743. 115. Kyoo, N., and Hee, R., 2015. Continuous Energy Harvesting Method Using Piezoelectric Element. IEEE 2nd International Future Energy Electronics Conference, Taiwan, pp. 1-4. 116. Lalem, F., Bouncer, A., Kacimi, R., Euler, R., and Saoudi, M., 2016. Faulty Data Detection in Wireless Sensor Networks Based on Copula Theory. 16th International Conference on Big Data and Advanced Wireless Technologies. Blagoevgrad, Bulgaria, pp. 1-7. 117. Lee, W.K., Schubert, M.J.W., Ooi, B.Y., and Ho, S.J.Q., 2018. Multi-source Energy Harvesting and Storage for Floating Wireless Sensor Network Nodes With Long Range Communication Capability. IEEE Transactions of Industry Applications, 54(2018), pp. 2606-2615. 118. Li, J., Zhou, H., Zuo, D., Hou, K., Xie, H. and Zhou, P., 2014. Energy Consumption Evaluation for Wireless Sensor Network Nodes Based on Queuing Petri Net. International Journal of Distributed Sensor Networks, 10(4), pp. 1-8. 119. Licheng, Yuming, Debo, and Zhiyu, 2018. A MEMS Based Piezoelectric Vibration Energy Harvester for Fault Monitoring System. Microsystem Technologies, 24(9), pp. 3637-3644. 110. Lien, I., Shu, Y., Wu, J., Shiu, S., and Lin, H., 2010. Revisit of Series-SSHI with Comparisons to other Interfacing Circuits in Piezoelectric Energy Harvesting. Smart Materials and Structures, 19(12), pp. 1-6. 111. Lippmann, M.G., 1881. Principle of the Conservation of Electricity. Annales de Chimieet de Physique, 524, pp. 145-178. 112. Liu, R., Wei, M., and Yang, H., 2016. Cold Start Control Strategy for a Two-Stroke Spark Ignition Diesel-Fuelled Engine with Air-Assisted Direct Injection. Applied Thermal Engineering, 108(2016), pp. 414-426. 113. LM35 2018. Precision Centigrade Temperature Sensors datasheet, Texas Instruments Incorporated, pp. MO. DOI: http://www.ti.com/lit/ds/symlink/lm35.pdf. 114.LM7805, 2019. Datasheet, Texas Instruments, pp. 1-14. DOI: https://www.sparkfiin. com/datasheets/Components/LM7805.pdf. 115.LTC3108, 2019. Datasheet, Linear Technology, pp. 1-22. DOI: https://www.analog.com/ media/en/technical-documentation/data-sheets/3108fc.pdf. 116.LTC3588-1, 2019. Datasheet, Linear Technology, pp. 1-20. DOI: https://www.analog.com/ media/en/technical-documentation/data-sheets/35881fc.pdf. 117.Ltc4150, 2019. Coulomb counter/battery gas gauge, Linear Technology, pp. 1-10. DOI: www.linear.com/docs/Datasheet/4150fc.pdf. 118. Lunderberg, E., Belarge, J., Bender, P., Bucher, B., Cline, D., Elman, B., Gade, A., Liddick, S., Longfellow, B., Prokop, C., Weisshaar, D. and Wu, C. (2018). JANUS — A setup for low-energy Coulomb excitation at ReA3. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 885(2018), pp. 30-37. DOI: https://doi.Org/10.1016/j.nima.2017.12.057. 119. Magno, M., David, B., Davide, B., Brendan, O., Emanuel, P., and Luca, B., 2014. Extended Wireless Monitoring through Intelligent Hybrid Energy Supply. IEEE transactions on industrial electronics, 61(4), pp. 1871-1881. 120. Mao, S., Man, H.C., and Vincent, W.S.W., 2014. Joint Energy Allocation for Sensing and Transmission in Rechargeable Wireless Sensor Networks. IEEE Transactions on Vehicular Technology, 63(6), pp. 2862-2875. 121.Mark, S., Kathleen, P., and Wouter, A.S., 2017. An RF-Powered DLL-Based 2.4-GHz Transmitter for Autonomous Wireless Sensor Nodes. IEEE Transactions on Microwave Theory and Techniques,65(7), pp. 2399-2408. 122. Martinez, B., Monton, M., Vilajosana, I., and Prades, 2015. The Power of Models: Modeling Power Consumption for IoT Devices. IEEE Sensors Journal, 15(10), pp. 5777-5789. 123. Mastbergen, D., Bryan, W., and Sachin, J., 2005. Producing Light from stoves using a thermoelectric generator, Engines and Energy conversion laboratory. Department of Mechanical Engineering, Colorado state University, pp. 1-27. DOI: http://stoves.bioenergy lists.org/stovesdoc/ethos/mastbergen/Mastbergen_ETHOS_2005.pdf. 124.Mateu, L., Cosmin, C., Nestor, L., Markus, P. and Peter, S., 2007. Human Body Energy Harvesting Thermogenerator for Sensing Applications. International Conference on Sensor Technologies and Applications. Valencia, Spain, pp. 14-20. 125. Mateu, L., Cosmin, C., Nestor, L., Markus, P., and Peter, S., 2006. Energy Harvesting for Wireless Communication Systems using Thermogenerators. IEEE Sensors Journal, 10(11), pp. 1-6. 126.MathWorks, 2019. Battery Documentation, DOI: https://www.mathworks.com/help/phy smod/sps/powersys/ref/battery.html. 127. MAXI 771, 2019. Datasheet, Maxim, pp. 1-16. DOI: https://datasheets.maximintegrated. com/en/ds/MAX1771.pdf. 128.MAX638, 2019. Datasheet, Maxim, pp. 1-8. DOI: https://datasheets.maximintegrated.com/ en/ds/MAX638.pdf. 129.MAX756/MAX757, 2018. 3.3V/5V/Adjustable-Output Step-Up DC-DC Converters datasheet. Maxim Integrated, pp. 1-10. DOI: https://pdfserv.maximintegrated.com/en/ds/ MAX756-MAX757.pdf. 130.Maxim, 2004. Source Resistance: The Efficiency Killer in DC-DC Converter Circuits. Maxim Integrated, pp. 1-10. DOI: https://www.maximintegrated.com/en/app-notes/index. mvp/id/3166. 131.Meng, J.H., Wang, X.D., and Chen, W.H., 2016. Performance Investigation and Design Optimization of a Thermoelectric Generator applied in Automobile Exhaust Waste Heat Recovery. Energy Conversion and Management, 120(2016), pp. 71-80. 131.Merrett, G., 2008. Energy-and Information-Managed Wireless Sensor Networks: Modelling and Simulation. University of Southampton, School of Electronics and Computer Science, Doctoral Thesis. 133.Michael, F., 2006. Correlations for Heat Generation and Outer Ring Temperature of High Speed and Highly Loaded Ball Bearings in an Aero-Engine. Aerospace Science and Technology, 10(2006), pp. 611-617. 134.Mike, M., 2013. Documentation for the Virtualwire Communications Library for Arduino. pp. 1-9. DOI: http://www.airspayce.com/mikem/arduino/VirtualWire.pdf. 135.Mike, M., 2013. RadioHead Packet Radio Library for Embedded Microprocessors. pp. 1- 10. DOI. http.//www.airspayce.com/mikem/arduino/RadioHead/classRH ASK.html. 136.Milenkovic, A., Milenkovic, M., Jovanov, E., Hite, D., and Raskovic, D., 2005. An Environment for Runtime Power Monitoring of Wireless Sensor Network Platforms. System Theory, Proceeding. 37(2005). Southeastern Symposium, pp. 1-5. 137.Mingjie, G., Kunpeng, W„Dazheng, X., and Wei-Hsin, L., 2017. Design and Experimental Investigation of a Low-Voltage Thermoelectric Energy Harvesting System for Wireless Sensor Nodes. Energy Conversion and Management, 138(15), pp. 30-37. 138.Mohamed, O., Fatma, H., Ahmed, S., Jaber, A. Q., El-Sayed, H., and Eman, G., 2015. OnChip Integrated Power Management MPPT Controller Utilizing Cell-Level Architecture for PV Solar System. Solar Energy, 117(2015), pp. 10-28. 139.Monika, J., Usha, T., and Mohit, G., 2011. Mobile Charger via Walk. 2011 International Conference on Multimedia, Signal Processing and Communication Technologies. Aligarh, India, pp. 17-19. 140.Moschitta, A., and Neri. I., 2014. Power consumption assessment in wireless sensor networks, pp. 204-224. DOI: 10.5772/57201. 141.Mudasar, R., and Kim, M., 2017. Experimental Study of Power Generation Utilizing Human Excreta. Energy Conversion and Management, 147(2017), pp. 86-99. 142.Naderipanzi, S., Parks, A., Parizi, F., and Smith, J., 2016. Mmonitor: In-Situ Energy Monitoring with Microwatt Power Consumption. IEEE International Conference on RFID (RFID),Orlando, FL, USA. pp. 3-9. 143. Nakutis, Z., 2009. Embedded Systems Power Consumption Measurement Methods Overview. MATAVIMAI, 2(44), pp. 29-35. 144. Nawir, A., Amat, B., and Ng, Y., 2018. Collated Studies on Rectifying Circuit on Impact Based Piezoelectric Energy Harvesting. Journal of Telecommunication, Electronic and Computer Engineering, 10(4), pp. 1-7. 145. Nesarajah, M., and Frey, G., 2016. Thermoelectric Power Generation: Peltier Element versus Thermoelectric Generator. 42th Annual Conference of the IEEE Industrial Electronics Society. Florence, Italy, pp. 4252-4257. 146. Nistor, Adrian, and Lucian, 2017. Considerations on the Use of Thermoelectric Generators at low Temperature to recover Waste Geothermal Energy. IEEE 14th International Conference on Engineering of Modern Electric Systems,Oradea, Rpmania, pp. 1-5. 147. Noureddine, A., Bourdon, A., Rouvoy, R., and Seinturier, L., 2012. Runtime Monitoring of Software Energy Hotspots. IEEE/ACM International Conference on Automated Software Engineering (ASE), Essen, Germany, pp. 3-9. 148. NSR0320MW2T1G, 2019. Datasheet, ON Semiconductor, pp. 1-9. DOI: https://www. onsemi.com/pub/Collateral/NSR0320MW2Tl-D.PDF. 149. Oswaldo J„ Nelson, C„ and Samara, S„ 2018. Characterization of a Thermoelectric Generator (TEG) System for Waste Heat Recovery. Energies, 11(6), pp. 1-7. 150. Ouameur, M„Ztade, F. and Le Bihan, Y. 2019. Novel Broadband Calibration Method of Current Shunts Based on VNA. IEEE Transactions on Instrumentation and Measurement, 68(3), pp. 854-863. 151. Panetta, K., 2018. 5 Trends Emerge in the Gartner Hype Cycle for Emerging Technologies. pp. 1-10. DOI: https://www.gartner.com/smarterwithgartner/5-trends-emerge -in-gartnerhype-cycle-for-emerging-technologies-2018/. 152. Pattathurani, L., Shubhransu, S.D., Pradeep, V., and Sridhar, R., 2019. A Novel High-Gain DC-DC Converter with Non-Linear Cairier Controller for Photovoltaic Applications. International Journal of Electrical Engineering and Education, 0(0), pp. 1-18. 153. Peng, K., 2017. A Survey of Energy-Efficient Data Gathering of Wireless Sensor Networks. Journal of Software Engineering, 11(1), pp. 94-101. 154. Peter, and Shilong, 2019. The Design and Performance of a Novel Vibration-Based Energy Harvester Adopted Various Machine Rotational Frequencies. Asset Intelligence through Integration and Interoperability and Contemporary Vibration Engineering Technology, pp. 625-632. 155. Peter, U„ Janos, R., Andras, S„ Janos, V., 2017. Spiral-Shaped Piezoelectric MEMS Cantilever Array for Fully Implantable Hearing Systems. Micromachims,8(311), pp. 1-7. 156. Petrisor, D., Zet, C., and Fosalau, C. 2016 Optimized Data Flow Management in Event Driven Wireless Sensor Networks a Case Study on Landslide Surveillance. IEEE 7th Annual Ubiquitous Computing, mElectronic and Mobile Communication Conference, New York United States of S America, pp . 1-7 157. Piezo Systems Inc., 2019. Piezoelectric energy Harvesters, pp. 1-5. DOI: https://piezo.com/. 158. Polytec, 2019. PDV-100 Digital Vibrometer. [On-line] Available at: https://www.polytec.eom/eu/vibrometry/products/single-point-vibrometers/pdv-100- portable-digital-vibrometer/ [Accessed on 9 January 2017], 159. Porcarelli, D., Davide, B., and Luca, B., 2012. Characterization of Lithium-Ion Capacitors for Low-Power Energy Neutral Wireless Sensor Networks. Ninth International Conference on Networked Sensing (INSS), Antwerp, Belgium, pp. 11-18. 160. Potsch, A., Berger, A., and Springer, A., 2017. Efficient Analysis of Power Consumption Behaviour of Embedded Wireless IoT Systems. IEEE International Instrumentation and Measurement Technology Conference ( I2MTC% Turin, Italy, pp. 1-6. 161. Pottie, G.J., and Kaiser, W.J., 2000. Wireless integrated network sensors. Communications of the ACM, 43: pp. 51-58. 162. Prabhu, Balaknmar, and Antony. 2017. Wireless Sensor Network Based Smart Environment Applications. International Journal of Innovative Research in Technology.3(8), pp. 1-10. 163. Prayati, A., Antonopoulos, C., Stoyanova, T., Koulamas, C., and Papadopoulos, G., 2010. A Modelling Approach on the Telosb WSN Platform Power Consumption. The Journal of Systems and Software, 83(2010), pp. 1355-1363. 164. Pnji c, A., Ljubomir, V., Dusan, V., Dejan, M., and Zoran, P., 2015. Thermal Energy Harvesting Wireless Sensor Node in Aluminum Core PCB Technology. IEEE Sensors Journal, 15(1), pp. 337-345. 165. Priscilla, Messias, Elder, Pedro, and Wesley, 2015. Electricity Generation Using Thermoelectric Generator - TEG. IEEE 15th International Conference on Environment and Electrical Engineering, Rome, Italy, pp. 10-17. 166. Proto, A., Daniele, B., Martin, C., David, V., Vladimir, K., Lukas, P., Silvia, C., Maurizio, S., and Marek, P., 2018. Thermal Energy Harvesting on the Bodily Surfaces of Arms and Legs through a Wearable Thermo-Electric Generator. Sensors, 18(6), pp. 1-6. 167. PZT Application Manual, 2016. The Piezoelectric Effect, pp. 1-4. DOI: http://www.aurelienr.com/electronique/piezo/piezo.pdf. 168. Qian, J., and Jing, X., 2018. Wind-Driven Hybridized Triboelectric-Electromagnetic Nanogenerator and Solar Cell as a Sustainable Power Unit for Self-Powered Natural Disaster Monitoring Sensor Networks. Nano Energy,52(2018), pp. 78-87. 169. Raja, A., Abdullah, G., Hafizah, A., Mohammad, S., Abdelmuttlib, I., Sajjad, A.M., and Kashif, S.J., 2016. A Survey on Energy Estimation and Power Modeling Schemes for Smartphone Applications. International Journal f Communication Systems, 30(11), pp. 1-22. 170. Rajeh, B„and Kiran, B, 20,5. Development of Prototype for Waste from Heat Energy Recovery from Thermoelectric System at Godrej Vikhroli Plant. International Conference on Nascent Technologies in the Engineering Field (1CNTE-20,5), Navi Mumbai, India, pp. 9-14. 171. Rashidi, P., Cook. D.J., Holder, L.B., and Schmitter-Edgecombe, M„2011. Discovering Activities to Recognize and Track in a Smart Environment. IEEE Transactions on Knowledge and Data Engineering, 23(4), pp. 527-539. 172. Rashmi, R., and Uplane, M.D., 2019. Real-Time Digital Control of Synchronous Buck Converter for Low-Power Application. Smart Intelligent Computing and Applications, 104(2019). Springer, Singapore. 173. Renaud, P., Fiorini, R., Schaijk, and Hoof, C., 2009. An Impact Based Piezoelectric Harvester Adapted to Low Frequency Environmental Vibration. Transducers, Denver, CO, USA, pp. 21-25. 174. Reyes, A., Erbay, C., Bautista, C„Han, A. and Sinencio, E.S., 2018. A Time-InterleaveBased Power Management System with Maximum Power Extraction and Health Protection Algorithm for Multiple Microbial Fuel Cells for Internet of Things Smart Nodes. Applied Science, 8(2018), pp. 1-16. 175. Ripudaman, S„Brijesh, R„and Sanjay, B,2017. A Low Delay Cross-Layer MAC Protocol for k-Covered Event Driven Wireless Sensor Networks. IEEE sensors letters, 1(6), pp. 1-4. 176. Robert, R., 2016. HC-12 Wireless Serial Port Communication Module. User Manual version 2.3B. pp. 1-10. DOI: https://www.elecrow.com/download/HC-12.pdf. 177. Roberts, A., Brooks, R., and Shipway, P., 2014. Internal Combustion Engine Cold-Start Efficiency: A Review of the Problem, Causes and Potential Solutions. Energy Conversion and Management, 82(2014), pp. 327-350. 178. Roundy, S., and Wright, K., 2004. A Piezoelectric Vibration Based Generator for Wireless Electronics. Smart Materials and Structures. 13(5), pp. 1131-1142. 179. Roundy, S., Wright, K.., and Rabaey, J., 2003. Study of Low Level Vibrations as a Power Source for Wireless Sensor Nodes. Computer Communications. 26(11), pp. 1131-1144. 180. Rozgic, D., and Markovic, D., 2015. A 0.78mw/Cm2 Autonomous Thermoelectric EnergyHarvester for Biomedical Sensors. Symposium on VLSI Circuits Digest of Technical Papers, Kyoto, Japan, pp. 17-19. 181. Ruqiang, Y„Hanghang, S„and Yuning, Q., 2013. Energy-Aware Sensor Node Design with Its Application in Wireless Sensor Networks. IEEE Transactions on Instrumentation and Measurement,62(5), pp. 1183-1191. 182. Ryu, H„Yoon, H. and Kim, S„ 2019. Hybrid Energy Harvesters: Toward Sustainable Energy Harvesting. Advanced Materials, 25(2019), pp. 180-185. 183. Saadona, S., and Yufridin, W., 2015. From Ambient Vibrations to Green Energy Source: MEMS Piezoelectric Energy Harvester for Low Frequency Application. IEEE Student Symposium in Biomedical Engineering and Sciences (ISSBES).Shah Alam, Malaysia. 184. Saha, P., Goswami, S., Chakrabarty, S., and Sarkar, S., 2014. Simulation and Model Verification of Shoe Embedded Piezoelectric Energy Harvester. 6th IEEE Power India International Conference (PIICON), Delhi. 185. Saleh, I., Abo-Al-Ez, K., and Abdullah, A., 2017. A Multi-Aware Query Driven (MAQD) Routing Protocol for Mobile Wireless Sensor Networks Based on Neuro-Fuzzy Inference. Journal of Network and Computer Applications,88(2017), pp. 72-98. 186. Savarimuthu, K., Sankararajan, R., and Murugesan, S., 2017. Analysis and Design of Power Conditioning Circuit for Piezoelectric Vibration Energy Harvester. IET Science, Measurement and Technology, 11(6-9), pp. 723-730. 187. Sharma, T., Glynn, J., Panos, E., Deane, P., Gargiulo, M., Rogan, F. and Gallachoir, B., 2019. High Performance Computing for Energy System Optimization Models: Enhancing the Energy Policy Tool Kit. Energy Policy, 128(2019), pp. 66-74. 188. Shekar, C., and Anwar, S., 2019. Real-Time State-of-Charge Estimation via Particle Swarm Optimization on a Lithium-Ion Electrochemical Cell Model. Batteries, 5(2019), pp. 1-4. 189. Shimadzu Corporation, 2019. AUTOGRAPH AG-I lOOkN, [on-line] Available at: https://www.shimadzu.com/an /index.html [Accessed on 9 May 2017]. 190. Shinghal, K., Arti, Neelam, and Raghuvir, 2011. Power Measurements of Wireless Sensor Networks Node. International Journal of Computer Engineering and Science, pp. 8-13. 191. Silviu, F., and George, M., 2015. A Low-Power Wireless Sensor for Online Ambient Monitoring. IEEE Sensors Journal, 15(2), 2015, pp. 742-749. 192. Sinan, K., Ugur, Y., Melike, Y., Bulent, T., and Cagri, G., 2017. Packet Size Optimization in Wireless Sensor Networks for Smart Grid Applications. IEEE Transactions on Industrial Electronics, 64(3), pp. 2392-2401. 193. Singh, A., Kumar, R., and Weber, J., 2015. A Broadband Bistable Piezoelectric Energy Harvester with Nonlinear High-Power Extraction. IEEE Transactions on Power Electronics. 30(12), pp. 6763-6774. 194. Singh, R., Rai, K., and Bose, K., 2017. A Low Delay Cross-Layer Mac Protocol for KCovered Event Driven Wireless Sensor Networks. IEEE Sensors Letters, 1(6), pp. 1-4. 195. Singh, V., Verma, and Kumar, 2017. Energy Efficient Event Detection Using Probabilistic Inference in Wireless Sensor Networks. IETE Journal of Research, 63(6), pp. 1-11. 196. Smita, G., Rajesh, P., Ajay, K., and Anshuman, 2015. Design WSN Node for Protection of Forest Trees Against Poaching Based on Zigbee. IEEE International Conference on Electronics, Computing and Communication Technologies, Bangalore, India, pp. 1-4. 197. Sodano, A., Garnett, Remi, D., and Daniel, J.I., 2006. Recharging Batteries Using Energy Harvested from Thermal Gradients. Journal of Intelligent material systems and structures, 18( 1 ), pp. 3-10. 198. Spachos, Song, and Gregori, 2017. Power Consumption of Prototyping Boards for Smart Room Temperature Monitoring. IEEE 22nd International Workshop on Computer Aided Modeling and Design of Communication Links and Networks, Lund, Sweden, pp. 19-22. 199. Spirjakin, D., Baranov, A., Somov, A. and Sleptsov, V., 2016. Investigation of Heating Profiles and Optimization of Power Consumption of Gas Sensors for Wireless Sensor Networks. Sensors and Actuators A: Physical, 247(2016), pp. 247-253. 200. Sprung, E., Tudor, C., Meyer, J., and Tatro, R., 2013. Low Power Design of a Wireless Sensor Node for Indoor Monitoring. IEEE 14th International Conference on Information Reuse and Integration (IRI), San Francisco, CA, USA. pp. 14-18. 201. Steven, J., Erik, L., and Steven, R., 2013. Transportation Shock and Vibration Literature Review. U.S. Department of Energy Used Fuel Disposition Campaign, 6(2013), FCRDUFD-2013-000169, PNNL-22514. 202. STM8L152xx, 2009. Datasheet Doc ID 15962 Rev 2. STMicroelectronics, pp. 1-142. DOI: https://www.st.com/resource/en/datasheet/stm81151g6.pdf. 203. Stojcev, K., Mirko, and Ljubisa, G., 2009. Power Management and Energy Harvesting Techniques for Wireless Sensor Nodes. 9th International Conference on Telecommunication in Modern Satellite,Cable, and Broadcasting Services. Nis, Serbia. 204. 247. f .h tn 0Derate 433/315 MHz Devices like Power Outl , Suat, 0., 2016. Arduino Lib to Upu a ^ / / -a „ i, ni/sui77/rc-switch [Accessed on 1 June 2() i , [on-line] Available at: https://github.eom/sui / / ^ b*kets. 205. Suganti,S„Micheal,D„Balbir,S„Mahinder,S„Patrick, and Lo, H„2017. An MPPT Micro Solar Energy Harvester for Wireless Sensor Networks. IEEE 13th International (Colloqium) on Signal Processing and Us Applications (CSPA 20,7), Penang, Malaysia, pp. 10-14. 206. Sun, Zhao, Z„Fang, Z„Chen, D„Chen, X., and Xuan, Y., 2013. Design and Imple^^ of an Ultra Low Power Health Monitoring Node for Wireless Body Sensor Network pouy(h International Conference on Digital Manufacturing and Automation (1CDMA), Qingdao> China, pp. 29-32. 207. Supreet, S., and Surbhi, S., 2017. Perfonnance Optimization of RF Energy Harvesting Relay based Interweave/Underlay Cognitive Radio Network. International Journal of Electronics 104(9), pp. 1546-1561. 208. Tan, T., Ha, L., and Anh, T., 2010. A Real-time Vibration Monitoring for Vehicle Based on j-DOF MEMS Accelerometer. InternationalConference onComputational Intelligenceand Vehicular System, Cau Giay, Ha Noi, Viet Nam, pp. 1-5. 209. Tan, Y., and Sanjib, P., 2011. Energy Harvesting From Hybrid Indoor Ambient Light and Thermal Energy Sources for Enhanced Performance of Wireless Sensor Nodes. IEEE Transactions on Industrial Electronics, 58(9), pp. 4424-4435. 210. Thielen, M., Kara, G., Unkovic, I. Dennis, M., and Christofer, FI., 2018. Thermal Harvesting Potential of the Human Body, Journal of Electronic Materials. 47(6), pp. 3307-3313. 211. Suat, 0., 2016. Arduino Lib to Operate 433/315 MHz Devices like Power Outlet Sockets. [on-line] Available at: https://github.com/sui77/rc-switch [Accessed on 1 June 2018] 212. Suganti, S„Micheal, D., Balbir, S., Mahinder, S., Patrick, and Lo, H., 2017. An MPPT Micro Solar Energy Harvester for Wireless Sensor Networks. IEEE 13th International Colloquium on Signal Processing and its Applications (CSPA 2017), Penang, Malaysia, pp. 10-14. 213. Sun, Zhao, Z., Fang, Z., Chen, D., Chen, X., and Xuan, Y., 2013. Design and Implementation of an Ultra Low Power Health Monitoring Node for Wireless Body Sensor Network. Fourth International Conference on Digital Manufacturing and Automation (1CDMA), Qingdao, China, pp. 29-32. 214. Supreet, S., and Surbhi, S., 2017. Performance Optimization of RF Energy Harvesting Relay based Interweave/Underlay Cognitive Radio Network. International Journal of Electronics, 104(9), pp. 1546-1561. 215. Tan, T., Ha, L., and Anh, T., 2010. A Real-time Vibration Monitoring for Vehicle Based on 3-DOF MEMS Accelerometer. International Conference on Computational Intelligence and Vehicular System, Cau Giay, Ha Noi, Viet Nam, pp. 1-5. 216. Tan, Y., and Sanjib, P., 2011. Energy Harvesting From Hybrid Indoor Ambient Light and Thermal Energy Sources for Enhanced Performance of Wireless Sensor Nodes. IEEE Transactions on Industrial Electronics, 58(9), pp. 4424-4435. 217. Thielen, M., Kara, G., Unkovic, I. Dennis, M., and Christofer, H., 2018. Thermal Harvesting Potential of the Human Body, Journal of Electronic Materials. 47(6), pp. 3307 3313. 218. TPS61040, 2015. Datasheet Rev 1 T Texas Instruments, pp. |-15. D0I. http://www.ti.com/lit/ds/symlink/tps6l 040.j3df 219. TPS62125, 2019. Datasheet Texas Instruments,PP1-10. DOI: http://www.famell.com/ datasheets/2003331.pdf?_ga=2.90642074.1898163009.15497029031.1468634452. 220. Turkmen, A. and Celik, C„ 2018. Energy harvesting with the piezoelectric material integrated shoe. Energy, 150, pp. 556-564. 221. Tyagi, A., Gopi, C., Baldi, P., and Islam, A., 2015. CNFET-Based 0.1-To 1.2-V DC/DC Boost Converter with Voltage Regulation for Energy Harvesting Applications. IEEE Transactions on Nanotechnology, 14(4), pp. 660-667. 222. Vajdi, A., Zhang, G., Wang, Y., and Wang, T., 2016. A New Self-Management Model for Large-Scale Event-Driven Wireless Sensor Networks. IEEE Sensors Journal, 16(20), pp. 7537-7544. 223. Varun, S., and Mahesh, K., 2019. Adaptive Load Distribution Approach Based on Congestion Control Scheme in Ad-Hoc Networks. International Journal of Electronics, 106(1), pp. 48-68. 224. Vehbi, C„Gungor, Gerhard, P., and Hancke, 2009. Industrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches. IEEE Transactions on Industrial Electronics, 56(10), pp. 4258-4265. 225. Vijayalakshmi, R., and Muruganand S., 2012 Real time Monitoring of Ubiquitous Wireless ECG Sensor Node for Medical care sing Zigbee. International Journal of Electronics,99(1), pp. 79-89. 227. Vladimir, L., 2013. Thermoelectric Enerev gy Hari Harvesting /oof - of r. TT Human Body Heat for Wearable Sensors. IEEE Sensors Journal , 13(6), pp. 2284-2291 228. W08G, 2019. Datasheet, Vishay General Semiconductor, pp 1-4. http://www.vishay. com/docs/88769/woo5g.pdf. 229. Walt, K., and James, B., 2009. Voltage-to-Frequency Converters. MT-028 Analog Devices Tutorials, 2(2009). pp. 14-20. 230. Wang, J., Shengxi, Z., Zhien, Z., and Daniil, Y., 2019. High-Performance Piezoelectric Wind Energy Harvester with Y-Shaped Attachments. Energy Conversion and Management, 181 (2019), pp. 645-652. 231. Wang, K., Guan, M., Chen, F., and Wei-Hsin, L., 2019. A Low-Power Thermoelectric Energy Harvesting System for High Internal Resistance Thermoelectric Generators, Journal of Electronic Materials, pp. 1-15, https://doi.org/10.1007/sll664-019-06925-0. 232. Wang, W, Chung, H„and Zhang, J., 2014. Near-real-time parameter estimation of an electrical battery mode, with multiple time constants and SOC-dependen, capacitance, IEEE Transactions Power Electronic, 29(11), PP- 5905 233. Wang, Y., Chuang, T., and Lee c., 2018. Resonant frequency Self-tunable Piezoelectric Cantilevers for Energy Harvestine and disturbing toeque absorbing. Sensor and A: Physical, 285( 1 ), pp. 25-34. 234. Wang, Y„ Fang, H„ Sahinoglu, Z„ Toshihiro, W„ and Satoshi, H„ 20,5. Adaptive estimation of the state of charge for lithiunt-ion batteries: „ on-,iner geontetric observer approach, IEEE Transactions Control 0/ Virvtom TV, i J _ ^tem Technology, 23(3), pp. 948-962, doi.org/10.1109/TCST.2014.2356503. 235. World Tempus., 2018. Seiko. History of the Brand. [On-line] Available at: http://en. worldtempus.com/article/seiko-histoiy-of-the-brand-14508.html [Accessed on 1 July 2017]. 236. Xiao, H., LU, C., and Ogai, H., 2017. A New Low-power Wireless Sensor Network for Realtime Bridge Health Diagnosis System. 56th Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE), Kanazawa, Japan, pp. 19-22. 237. XinLu, and Shuang, Y., 2010. Thermal Energy Harvesting for WSNs. IEEE International Conference on Systems, Man and Cybernetics. Istanbul, Turkey, pp. 10 13. 238. Kinyan, Z„ Xiaoyu, J., Yi-chao, C., Xiaopeng, L„and Wenyuan, X., 2018. LESS: Link Estimation with Sparse Sampling in Intertidal WSNs. Sensors.18(3), pp. 1-27. , ou T 0017 Real Time Identification of the 239. Xiuliang, Z„Yong, C„ Limei, W„and Shaobo, J., 2017. Keatparameters Based on the Vibration Velocity Internal Combustion Engine Combus 10 Signal. Journal of Sound and Vibration, 390(2017), pp. 205-217. 240. 251Xiuwu, Y., Feng, Z., Lixing , Z 2018. NoveL DATA FUSION ALGORITHM BASED EVENT DRIVEN Event-Driven and Dempster-Shafer Fvidence * Theory WireIP ce p US1°n Algonthm Base 100(4), pp. 1377-1391. Personal Communicat 241. Xppower, 2019. Parallel and Series Operation https://www.xppower.com/pdfs/Operation.pdf. Technical Article , pp. 1-4. 242. Xu, w„Yushu, Z„Qrngjiang, S„and Xiaodong, W„2015. Energy Management and C Layer Optimization for Wireless Sensor Network Powered by Heterogeneous En Sources. IEEE Transactions on Wireless Communications, 14(5), pp. 2814-2826. 243. Yahya J., Mendelson, A., Ben Asher Y., and Chattopadhyay A., 2018. Power Modelin High-Performance Computing Processors. In: Energy Efficient High Perform Processors. Computer Architecture and Design Methodologies. Springer, Singapore. 244. Yan, Y., Feng, H., Yuequan, B., and Jinping, O., 2016. A Study on Data Loss Compens of Wifi-Based Wireless Sensor Networks for Structural Health Monitoring. IEEE Sen Journal, 16(10), pp. 3811-3818. 245. Yangyiwei, H. Xiang, H.L., Zhao, X., Ying, D„ Yaoze, L„ and Tongqing, Y„ 2 Investigation on Behavior of the Vibration-Based Piezoelectric Energy Harvester Arr Ultra Capacitor Charging. Applied Physics Letters, 106(17), pp. 1 246. Yap, Y„Naayagi, T„and Woo, U 2016. n . /o Conference. Singapore, pp. 3241-3245. phone Charging Application. IEEE Regio 247. Yesner, G., Kuciej, M., Safari’ A Jasim , 2016 Piezoelectric energy harvesting using a novel cymbal transducer design. Joint IEEE International Symposium on the Applications of Ferroelectrics, European Conference on application of polar dieelectric and piezoelectric force microscopy workshop, Darmstadt, Germany. 248. Yue, G., and Lian R., 2019. Design of Linear Power Supply Circuit Based on Bipolar Technology. Recent Developments in Intelligent Computing, Communication and Devices. 752(2019). Springer, Singapore. 249. Yue, X., Kiely, J., Ghauri, S., Kauer, M., Bellanger, M., and Gibson, D., 2017. A successive approximation method to precisely measure leakage current of the rechargeable Lithium coin battery, Journal of Energy Storage, 13(2017), pp. 442-446. 250. Yun, G.S., and Leong. K.S., 2017. Optimization of Electrical Energy Harvesting from Focused Infrared Light Using Thermoelectric Module with Uniform Heat Distribution Journal of telecommunication electronic and computer engineering 9(3), p.p 105-110 251. Zhang, and He, 2017. Impact-Based Piezoelectric Energy harvester for multidimensional Low-Level, Broadband, and Low-Frequency vibration. Applied physic letter, 110 (2017)pp. 1-6. 252. Zhengbao, Y, and Jean, Z„ 20,6. Towatd Hatvesting Vibration Energy from Direcdons by a Nonlinear Compressive-Mode Piezoelectric Transducer. IEE Transactions on Mechatronics, 21(3), pp. 1787-1791 253. Zhenjun, Y., Kenya, N., Ryuichi, O., Tsuyoki, T., Daiki, C., and Fumio, N Magnetostrictive Clad Steel Plates for High-Performance Vibration Energy Har Applied Physics Letters, 1 12(073902), pp. 1-6. 254. Zhinong, J., Zhiwei, M., Zijia, W., and Jinjie, Z., 2017. Fault Diagnosis of Combustion Engine Valve Clearance Using the Impact Commencement Detection M Sensors, 17(2916), pp. 1-19. 255. Zhou, C., Ming, W.W.Q., and Zhengqiu, L., 2018. A Wireless Sensor Network Considering Energy Consumption Balance. Mathematical Problems in Engineering 2018,pp. 1-8. 256. Zhou, X., Ji, X., Chen, Y„Li, X., and Xu, W„2018. LESS: Link Estimation with Sparse Sampling in Intertidal WSNs. Sensors , 18(2018), pp. 1-27. 257. Zhu, D., Tudor, M.J., and Beeby, S.P., 2010. Strategies for Increasing the Operating Frequency Range of Vibration Energy Harvesters: A Review. Measurement Science and Technology, 21(2), pp. 1-29. 258. Zhu, W., 2010. Energy-Saving Event-Driven Wakeup and Routing in Wireless Sensor Networks. IEEE Global Telecommunications Conference. Miami, Florida, USA, pp. 1-6. 259. Zhu, Y., Yuanjin, Z., Yuan, G., Darmayuda, I.M., Chengliang, S., Minkyu, J., and Alex, Y.G., 2015. An Energy Autonomous 400 MHz Active Wireless SAW Temperature Sensor Powered by Vibration Energy Harvesting. IEEE Transactions on Circuits and Systems-I, 62(4), pp. 1-6

Similar Items