Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test

This study presents the characterization of cyclic plasticity type wear mechanism on reciprocating sliding wear test for Titanium alloy, Ti-6Al-4V. The reciprocating sliding wear test set up by pin-on-flat configuration made from Ti-6Al-4V. Dimension of flat bar used Contact material is 100 x...

Full description

Saved in:

Bibliographic Details
Main Author:	Mohd Harun, Dalila
Format:	Thesis
Language:	English English English
Published:	2020
Subjects:	TA401-492 Materials of engineering and construction Mechanics of materials
Online Access:	http://eprints.uthm.edu.my/1007/3/24p%20AINI%20SYAFIQAH%20MOHD%20NASIR.pdf http://eprints.uthm.edu.my/1007/1/AINI%20SYAFIQAH%20MOHD%20NASIR%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1007/2/AINI%20SYAFIQAH%20MOHD%20NASIR%20WATERMARK.pdf
Tags:	Add Tag No Tags, Be the first to tag this record!

id	my-uthm-ep.1007
record_format	uketd_dc
spelling	my-uthm-ep.10072021-09-20T07:23:57Z Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test 2020-08 Mohd Harun, Dalila TA401-492 Materials of engineering and construction. Mechanics of materials This study presents the characterization of cyclic plasticity type wear mechanism on reciprocating sliding wear test for Titanium alloy, Ti-6Al-4V. The reciprocating sliding wear test set up by pin-on-flat configuration made from Ti-6Al-4V. Dimension of flat bar used Contact material is 100 x 25 x 8 mm. Meanwhile for the contact pin, two different diameter cylinders are used i.e Ø6.5 mm and Ø12 mm. The effects of variable parameter set up which are applied normal load (50–200 N), number of cycles (5–20 cycles), and frequency (1– 2.5 Hz) on reciprocating sliding wear behavior are investigated. Frictional force resulted 60 – 80 N tangential force in range for those three parameter setup by both two contact pins cylinder. The COF resulted running-in condition at the earlier second and highest peak experienced in value range of 0.45-0.48. The COF graph pattern shows increasing at 1 second and the decreasing continuously. For the micrography, it shows sticking mostly at the end of wear track and significant at 200 N, 20 cycles and 1 Hz frequency for those two contact pins cylinder. The profilometry shows the result of wear width and wear area where the wear width and wear area increasing with the increasing of number of cycles, applied normal load and sliding frequency for both contact pins cylinder. The hardness shows high value at 200 N, 20 cycle and 2.5 Hz of frequency. Contact pin Ø6.5 mm experienced greater wear width, wear area and hardness due to high contact pressure applied during the sliding. The cyclic plasticity presences following reciprocating sliding wear test of Ti-6Al-4V are examined using SEM. The black spot presence at the end of wear track are identified as an accumulation of ploughing that occurred during the sliding and proved by the highest hardness value recorded, 962 HV for contact pin Ø6.5 mm that determined by using Micro Vickers Hardness Tester. This is strong evidence that shows that plastic deformation is form during the sliding wear. The existing of element O by EDX analysis also proved the formation of plastic deformation. The optimum parameters to achieved high plasticity type wear behaviour also are determined. High frequency experienced low number of COF and marginal plastic deformation form during the reciprocating sliding wear test while low cycle and low applied normal load will caused low formation of cyclic plastic deformation. 2020-08 Thesis http://eprints.uthm.edu.my/1007/ http://eprints.uthm.edu.my/1007/3/24p%20AINI%20SYAFIQAH%20MOHD%20NASIR.pdf text en public http://eprints.uthm.edu.my/1007/1/AINI%20SYAFIQAH%20MOHD%20NASIR%20COPYRIGHT%20DECLARATION.pdf text en staffonly http://eprints.uthm.edu.my/1007/2/AINI%20SYAFIQAH%20MOHD%20NASIR%20WATERMARK.pdf text en validuser mphil masters Universiti Tun Hussein Onn Malaysia Fakulti Kejuruteraan Mekanikal dan Pembuatan
institution	Universiti Tun Hussein Onn Malaysia
collection	UTHM Institutional Repository
language	English English English
topic	TA401-492 Materials of engineering and construction Mechanics of materials
spellingShingle	TA401-492 Materials of engineering and construction Mechanics of materials Mohd Harun, Dalila Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
description	This study presents the characterization of cyclic plasticity type wear mechanism on reciprocating sliding wear test for Titanium alloy, Ti-6Al-4V. The reciprocating sliding wear test set up by pin-on-flat configuration made from Ti-6Al-4V. Dimension of flat bar used Contact material is 100 x 25 x 8 mm. Meanwhile for the contact pin, two different diameter cylinders are used i.e Ø6.5 mm and Ø12 mm. The effects of variable parameter set up which are applied normal load (50–200 N), number of cycles (5–20 cycles), and frequency (1– 2.5 Hz) on reciprocating sliding wear behavior are investigated. Frictional force resulted 60 – 80 N tangential force in range for those three parameter setup by both two contact pins cylinder. The COF resulted running-in condition at the earlier second and highest peak experienced in value range of 0.45-0.48. The COF graph pattern shows increasing at 1 second and the decreasing continuously. For the micrography, it shows sticking mostly at the end of wear track and significant at 200 N, 20 cycles and 1 Hz frequency for those two contact pins cylinder. The profilometry shows the result of wear width and wear area where the wear width and wear area increasing with the increasing of number of cycles, applied normal load and sliding frequency for both contact pins cylinder. The hardness shows high value at 200 N, 20 cycle and 2.5 Hz of frequency. Contact pin Ø6.5 mm experienced greater wear width, wear area and hardness due to high contact pressure applied during the sliding. The cyclic plasticity presences following reciprocating sliding wear test of Ti-6Al-4V are examined using SEM. The black spot presence at the end of wear track are identified as an accumulation of ploughing that occurred during the sliding and proved by the highest hardness value recorded, 962 HV for contact pin Ø6.5 mm that determined by using Micro Vickers Hardness Tester. This is strong evidence that shows that plastic deformation is form during the sliding wear. The existing of element O by EDX analysis also proved the formation of plastic deformation. The optimum parameters to achieved high plasticity type wear behaviour also are determined. High frequency experienced low number of COF and marginal plastic deformation form during the reciprocating sliding wear test while low cycle and low applied normal load will caused low formation of cyclic plastic deformation.
format	Thesis
qualification_name	Master of Philosophy (M.Phil.)
qualification_level	Master's degree
author	Mohd Harun, Dalila
author_facet	Mohd Harun, Dalila
author_sort	Mohd Harun, Dalila
title	Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
title_short	Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
title_full	Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
title_fullStr	Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
title_full_unstemmed	Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
title_sort	characterization of cyclic plasticity type wear mechanism for titanium alloy, ti-6al-4v on reciprocating sliding wear test
granting_institution	Universiti Tun Hussein Onn Malaysia
granting_department	Fakulti Kejuruteraan Mekanikal dan Pembuatan
publishDate	2020
url	http://eprints.uthm.edu.my/1007/3/24p%20AINI%20SYAFIQAH%20MOHD%20NASIR.pdf http://eprints.uthm.edu.my/1007/1/AINI%20SYAFIQAH%20MOHD%20NASIR%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1007/2/AINI%20SYAFIQAH%20MOHD%20NASIR%20WATERMARK.pdf
_version_	1747830703248113664

Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test

Similar Items