Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test
This study presents the characterization of cyclic plasticity type wear mechanism on reciprocating sliding wear test for Titanium alloy, Ti-6Al-4V. The reciprocating sliding wear test set up by pin-on-flat configuration made from Ti-6Al-4V. Dimension of flat bar used Contact material is 100 x...
Saved in:
Main Author: | Mohd Harun, Dalila |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2020
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/1007/3/24p%20AINI%20SYAFIQAH%20MOHD%20NASIR.pdf http://eprints.uthm.edu.my/1007/1/AINI%20SYAFIQAH%20MOHD%20NASIR%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1007/2/AINI%20SYAFIQAH%20MOHD%20NASIR%20WATERMARK.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005) -
The Effect Of Alloying Elements On Wear Behaviour Of Ni-Al [TA483. I98 2004 f rb] [Microfiche 7664].
by: Ishak, Mohamad Izha
Published: (2004) -
A comparative study on wear and corrosion behaviour of tungsten carbide-nickel (Wc-Ni) and tungsten carbide-cobalt (Wc-Co) high velocity oxy-fuel (HVOF) for carbon steel blade
by: Ahmad, Noor Aqilah
Published: (2017) -
High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application
by: Harimon, Mohd Azhar
Published: (2017) -
Influence of Alumina and Titanium Dioxide Nanoparticles Reinforcement on Sn-3.0ag-0.5cu and Sn-58bi Solder Alloys
by: Segar Singh, Amares Singh Gill
Published: (2015)