Ofdm system cyclic prefix characteristic analaysis for wimax technology
In the modern world, Wireless Communication System are involved in every part of life. Worldwide Interoperability for Microwave Access (WIMAX) system based on Orthogonal Frequency Division Multiplexing (OFDM) with different adaptive modulation techniques is currently the topic of discussion.WIMAX...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English English |
| 出版: |
2015
|
| 主題: | |
| 在線閱讀: | http://eprints.uthm.edu.my/1263/2/ADEB%20ALI%20MOHAMMED%20AHMED%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1263/1/24p%20ADEB%20ALI%20MOHAMMED%20AHMED.pdf http://eprints.uthm.edu.my/1263/3/ADEB%20ALI%20MOHAMMED%20AHMED%20WATERMARK.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | In the modern world, Wireless Communication System are involved in every part of
life. Worldwide Interoperability for Microwave Access (WIMAX) system based on
Orthogonal Frequency Division Multiplexing (OFDM) with different adaptive modulation
techniques is currently the topic of discussion.WIMAX is the next generation of
broadband wireless technology which offers a greater range and bandwidth compared to
the other available broadband wireless access technologies such as Wireless Fidelity (Wi-
Fi) and Ultra Wideband (UWB) Family of standards. This research is focus on Orthogonal
Frequency Division Multiplexing (OFDM) using adaptive modulation technique on the
physical layer of WIMAX using the concept of cyclic prefix that adds additional bits at
the transmitter end. The purpose of the cyclic prefix is to minimize the inter symbol
interference and to improve the bit error rate. The MATLAB software is used to develop
the OFDM model with cyclic prefix and analysis the performance of the WIMAX system.
The performance of this system is compared between the models with one cyclic prefix,
two cyclic prefix and without cyclic prefixed. The performance analysis is based on the
Bit Error Rate (BER), Signal to Noise Ratio (SNR) and probability of error. The
simulation results shows that modulation BPSK and QPSK have the low bit error rate
while 64-QAM has the highest bit error rate equal to |
|---|