Dynamic modelling of flexible link aerator with embedded holes to generate dissolved oxygen in tiger prawn pond
In the aquaculture industry, aerators are used to increase the level of dissolved oxygen in water by mixing the water in order to ensure that the oxygen content is uniformly distributed throughout the pond. This aerator uses a new concept by using flexible link by implementing embedded holes in i...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English English |
| 出版: |
2015
|
| 主题: | |
| 在线阅读: | http://eprints.uthm.edu.my/1389/1/24p%20NAZATUL%20ERMA%20ZULKIPLI.pdf http://eprints.uthm.edu.my/1389/2/NAZATUL%20ERMA%20ZULKIPLI%20WATERMARK.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | In the aquaculture industry, aerators are used to increase the level of dissolved
oxygen in water by mixing the water in order to ensure that the oxygen content is
uniformly distributed throughout the pond. This aerator uses a new concept by using
flexible link by implementing embedded holes in its design in. The purpose of
adding holes in the design is to achieve higher dissolved oxygen level. This research
consists on developing a new mathematical model by modification of the Finite
Difference Method to suit the irregular boundary of the new design of flexible link
aerator. The simulation is done using Matlab SIMULINK and three voltages are
chosen to be the input voltage which are 6V, 9V and 12V while the percentage of
immerse level were set at 100%, 75%, 50% and 25%. The best result of dissolved
oxygen level was achieved by running the simulation at 12V and 25% of immerse
level using the 65cm length of PVC link .The simulation of this flexible link was
able to oxygen up to 9.65 mg/L with the average Standard Oxygen Transfer
Efficiency 2.15 kgO2/kWhr. |
|---|