Performance of multichannel fiber optic parametric amplifier
Optical networks have a significant role to play in the present and future global telecommunication networking scenario due to the increasing demand for larger transmission capacity. In fiber optic communication systems, Dense Wavelength Division Multiplexing (DWDM) is very popular in which multi...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English |
| 出版: |
2015
|
| 主題: | |
| 在線閱讀: | http://eprints.uthm.edu.my/1397/1/24p%20NOR%20%27IZZATI%20MOHD%20NOOR.pdf http://eprints.uthm.edu.my/1397/2/NOR%20%27IZZATI%20MOHD%20NOOR%20WATERMARK.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Optical networks have a significant role to play in the present and future global
telecommunication networking scenario due to the increasing demand for larger
transmission capacity. In fiber optic communication systems, Dense Wavelength
Division Multiplexing (DWDM) is very popular in which multiple optical signals at
various wavelengths are combined and transmitted through a single fiber. DWDM
technology provides a cost effective deployment strategy. One of the key components in
DWDM system is an optical amplifier. Fiber optical parametric amplifier (FOPA) can
be used for several signal processing application including optical amplification, phase
conjugate and wavelength conversion. FOPA operate based on a fiber nonlinearity
known as four wave mixing (FWM). Fiber optical parametric amplifiers are based on
the third-order susceptibility of the glasses making up the fiber core. It happens when at
least two waves with the different frequencies co-propagate in the fiber. In this
simulation is to show the ability of a single pump parametric amplifier in the eight
channels DWDM transmission system and performance of FOPA in order to ensure
higher level of amplification coped with less amplifier produced signal impairments.
The simulation were done by software OptiSystem 13, the fiber optical amplifier is
perform by simulation of 10 Gbit/s each channel. Furthermore NRZ encoding
technique, intensity OOK modulation format has been used in this simulation. The
frequencies of channel carrier was chooses in the region from 193.1 THz to 193.8 THz.
Eight modulated signal are transmitter over 220 km span long single mode fiber. The
single pump combination with four signal radio frequency, 180 MHz, 420 MHz, 1.087
GHz and 2.133 GHz are used to show higher level of amplification and mitigating the
impact of simulated Brillouin scattering. As a result, the maximum 22.134 dB gain and
lower noise figure 2.84 dB is achieved. |
|---|