Development of PID current control for DC motor using arduino
Power electronic systems have been widely used in varieties of domestic applications and industrial sector due to its reliability, simple construction and low weight. Therefore, this project is to design and to develop of PID Current Control that could be applied for the DC motor. The control tec...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English English |
| 出版: |
2014
|
| 主題: | |
| 在線閱讀: | http://eprints.uthm.edu.my/1556/1/24p%20MOHD%20KHAIRUL%20AKLI%20AB%20GHANI.pdf http://eprints.uthm.edu.my/1556/2/MOHD%20KHAIRUL%20AKLI%20AB%20GHANI%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1556/3/MOHD%20KHAIRUL%20AKLI%20AB%20GHANI%20WATERMARK.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Power electronic systems have been widely used in varieties of domestic applications
and industrial sector due to its reliability, simple construction and low weight.
Therefore, this project is to design and to develop of PID Current Control that could
be applied for the DC motor. The control technique was called as current control
technique by comparing the output current with the reference current. Thus, the PID
controller will force the output current to follow the reference current by creating the
pulse with modulation (PWM) signals. The PID Controller was developed and
simulated by using MATLAB/Simulink software and then implemented to the
hardware by using Arduino microcontroller board as a digital signal processing
system. The final observation from this project is by using Arduino Uno board, the
current of DC motor can control but in small scale. This is due to the current sensor
that used had range in small scale reading. Lastly, the result of the performance for
this controller was explained in this report by observed in three condition;
simulation, open loop control and closed loop control. |
|---|