Development of time delay current control for lead acid battery 12 v DC by using arduino
Development of time delay current control for lead acid battery 12 V dc by using Arduino is the aim of this thesis. The development problem is necessary before applying control techniques to guarantee the execution of any task according to a desired input with minimum error. The main objective...
Saved in:
Main Author: | |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2014
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/1625/1/24p%20NURUL%20SYAZRAH%20MAT%20YATIM.pdf http://eprints.uthm.edu.my/1625/3/NURUL%20SYAZRAH%20MAT%20YATIM%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1625/2/NURUL%20SYAZRAH%20BINTI%20MAT%20YATIM%20WATERMARK.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | Development of time delay current control for lead acid battery 12 V dc by using
Arduino is the aim of this thesis. The development problem is necessary before applying
control techniques to guarantee the execution of any task according to a desired input
with minimum error. The main objective of this thesis is to design the time delay has on
the performance of a current controlled for the buck-boost converter. The time delay
controller is generally regarded as a nuisance to a control system. In addition, the
performance of the Arduino and MATLAB as a signal processing device interface time
is used. The feedback of open loop and closed loop time delay controller is also been
analyzed. Based on results, the experiment of closed loop hardware gives better results
than simulation in terms of output current. Through this study it is proved that the time
delay controller is successfully designed to control current for lead acid battery. |
---|