Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting
The hypereutectic AlSi alloys contain Si more than 12.3 % (eutectic point), and possesses better mechanical properties than eutectic and hypoeutectic AlSi alloys. But the higher percentage of Si in the hypereutectic AlSi alloy caused to result primary and eutectic Si in microstructure during melt...
Saved in:
Main Author: | Ahmed Bhutto, Aqeel |
---|---|
Format: | Thesis |
Language: | English English English |
Published: |
2021
|
Subjects: | |
Online Access: | http://eprints.uthm.edu.my/1776/2/AQEEL%20AHMED%20BHUTTO%20-%20declaration.pdf http://eprints.uthm.edu.my/1776/1/AQEEL%20AHMED%20BHUTTO%20-%2024p.pdf http://eprints.uthm.edu.my/1776/3/AQEEL%20AHMED%20BHUTTO%20-%20fulltext.pdf |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Assessment of the effect of grain refinement on the solidification characteristics of Al-Si-Cu eutectic cast alloy using thermal analysis technical (CA-CCTA)
by: M El-Aswad, Ashraf Mahmood
Published: (2015) -
Penghasilan Dan Pencirian Komposit Matriks Zn Diperkuat Partikel SiC Melalui Kaedah Metalurgi Serbuk.
[TA418.9.C6 J94 2003 f rb] [Microfiche 7546]
by: Mohamed, Julie Juliewatty
Published: (2003) -
Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures
by: Muda, Rizamarhaiza
Published: (2021) -
Influence of preheating on chatter and machinability of titanium alloy - Ti6A14V
by: Kamdani, Kamaruddin
Published: (2005) -
Kesan Agregat Berkubik Dan Pengusiaan Ke Atas Sifat Kejuruteraan Konkrit Asfalt ACW14 [TA441. R165 2008 f rb].
by: Putra Jaya, Ramadhansyah
Published: (2008)