FPGA based maximum power point tracking controller for photovoltaic system
Nowadays, PV cell which is known as a photovoltaic is one of the most important parts in electrical field to convert photolight to voltage and current at the desired output voltage and frequency by using varies control techniques. This project presents design and implementation of FPGA Based Maxi...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1990/1/24p%20MUKARRAM%20ABDULJALIL%20ALMUHAYA.pdf http://eprints.uthm.edu.my/1990/2/MUKARRAM%20ABDULJALIL%20ALMUHAYA%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1990/3/MUKARRAM%20ABDULJALIL%20ALMUHAYA%20WATERMARK.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Nowadays, PV cell which is known as a photovoltaic is one of the most
important parts in electrical field to convert photolight to voltage and current at the
desired output voltage and frequency by using varies control techniques. This project
presents design and implementation of FPGA Based Maximum Power Point
Tracking (MPPT) Controller for Photovoltaic system. The MPPT controller is
employed to control and get Maximum Power Point (MPP) of the output voltage
reference from the source. Altera DE2 board devices are used as a controller for the
implementation of the MPPT system. The simulation of this FPGA based MPPT
controller is designed and implemented using Quartus II VHDL software tools. The
results shown, the same signal obtained from Matlab simulink software as compared
with Quartus II. It has been observed that the designed system has been successfully
extracting the MPP from the pseudo sources used in the simulations. The system has
been evaluated in sunny day and partially shaded conditions to analyze the
respective outputs in these conditions. |
|---|