Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation
Minimum quantity lubrication (MQL) machining is one of the promising solutions to the requirement for reducing cutting fluid consumption. The work here describes MQL machining in a range of lubricant consumption of 2.0-2.355ml/s, which is between 10– 100 times lesser than the consumption usually...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English English English |
| 出版: |
2012
|
| 主题: | |
| 在线阅读: | http://eprints.uthm.edu.my/2000/1/24p%20NIK%20FAZLI%20SAPIAN.pdf http://eprints.uthm.edu.my/2000/2/NIK%20FAZLI%20SAPIAN%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/2000/3/NIK%20FAZLI%20SAPIAN%20WATERMARK.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Minimum quantity lubrication (MQL) machining is one of the promising solutions to
the requirement for reducing cutting fluid consumption. The work here describes MQL
machining in a range of lubricant consumption of 2.0-2.355ml/s, which is between 10–
100 times lesser than the consumption usually adopted in industries. MQL machining in
this range is called pulse jet coolant delivery system. A specially designed system, the
IP MQL, was used for concentrating small amounts of lubricant onto the cutting
interface. The performance of concentrated spraying of lubricant in pulse jet coolant
delivery system design was simulated and compared with that of current ‘Pulse Jet
MQL’ systems. The concentrated spraying of lubricant with a specially designed system
was found to be effective in increasing tool life in the pulse jet coolant delivery system
range. |
|---|