Generation of tunable q-switched erbium-doped fiber laser based on graphite flakes saturable absorber
Pulsed fiber laser has tremendous application in laser processing and laser sensor. The key element to produce a passively Q-switched fiber laser is by using a saturable absorber (SA). Passively Q-switched fiber laser is the most desirable pulse in laser technology due to its ability to generate...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English English |
| Published: |
2020
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/405/1/24p%20NIK%20NOOR%20HARYATUL%20ELEENA%20NIK%20MAHMUD.pdf http://eprints.uthm.edu.my/405/2/NIK%20NOOR%20HARYATUL%20ELEENA%20NIK%20MAHMUD%20WATERMARK.pdf http://eprints.uthm.edu.my/405/3/NIK%20NOOR%20HARYATUL%20ELEENA%20NIK%20MAHMUD%20COPYRIGHT%20DECLARATION.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Pulsed fiber laser has tremendous application in laser processing and laser sensor.
The key element to produce a passively Q-switched fiber laser is by using a saturable
absorber (SA). Passively Q-switched fiber laser is the most desirable pulse in laser
technology due to its ability to generate optical pulses in microsecond and
nanosecond. The aim of this study is to construct a single ring erbium-doped fiber
(EDF) laser based on graphite flakes SA to produce short pulse laser. Graphite flakes
SA were prepared by mechanical exfoliation techniques and was transferred onto a
fiber ferrule tip. The saturable absorption property of the graphite was measured
using twin detector method which resulted in a modulation depth of 23.82% with a
saturation intensity of 0.031 MW/cm2. Surface morphology, elemental analysis and
absorbance characteristics of the graphite flakes were analyzed by the field emission
scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX)
and ultraviolet visible spectroscopy (UV-VIS). The result showed that the carbon
element on the SA has a very strong peak intensity. The two different EDF
coefficient of 6.43 dB/m and 18.93 dB/m (EDF M-5 and EDF I-12) showed a
repetition rate of 41.62 kHz and 60.00 kHz with a pulse width of 6.45 μs and 3.38 μs,
respectively at a pump power of 268.8 mW. The wavelength tunability of passively
Q-switched fiber laser for EDF M-5 and EDF I-12 were optimized at fixed pump
power where the tuning range of EDF M-5 occurred between 1544 nm to 1560 nm
and 1552 nm to 1570 nm for EDF I-12. The passively Q-switched fiber laser with
different EDF coefficients were successfully constructed in a single ring
configuration with more selection of wavelength that is up to L band by using higher
EDF coefficient. |
|---|