Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil
This research focuses on the condition monitoring of worm gearbox lubricated with contaminated gear oil. The main objectives are to characterize vibration behavior of worm gear as function contaminated lubricant viscosity. Worm gearbox consists of a spirally grooved screw moving against a toothed...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 語言: | English English |
| 出版: |
2013
|
| 主題: | |
| 在線閱讀: | http://eprints.uthm.edu.my/6670/1/24p%20MAZNAN%20ISMON.pdf http://eprints.uthm.edu.my/6670/2/MAZNAN%20ISMON%20WATERMARK.pdf |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | This research focuses on the condition monitoring of worm gearbox lubricated with contaminated
gear oil. The main objectives are to characterize vibration behavior of worm gear as function
contaminated lubricant viscosity. Worm gearbox consists of a spirally grooved screw moving
against a toothed wheel. Experimental test rig with inverter, electric motor and gearbox to be
develop and employed for the investigation. New gear oil with ISO VG 100, 460 and 680 had
been indentified to serve the sliding friction of both gears as a comparison to contaminated oil. A
predetermine speed of electric motor to be introduced to the gearbox and a set of vibration
instrumentations was installed as to capture the vibration signal generated. As to enhance the
effectiveness of condition monitoring techniques, temperature rising in the gear oil upon the
testing period are monitored using PicoLog Data Logger and later to be analyze. The experiment
had revealed that oil with higher viscoscity will contribute to less vibration spectrum. At 900
RPM, the vibration had reduced for about 0.0438 mm/s for ISO VG 100 during the experimental
testing within new and contaminated gear oil. It has contribute a reduction of vibration about
51.02% while the temperature monitoring had shown on the higher side compare to the new oil
with less viscoscity. |
|---|