A preliminary study of turning of composites
Most of the engineering parts are made from metal based materials. Composites have recently become an economic alternative to traditional materials like metals due to their considerable advantages especially in high specific strength and specific stiffness. But, turning of composites is differ...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2008
|
| 主题: | |
| 在线阅读: | http://eprints.uthm.edu.my/7089/1/24p%20NURHAFIZZAH%20HASSAN.pdf |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Most of the engineering parts are made from metal based materials. Composites have
recently become an economic alternative to traditional materials like metals due to their
considerable advantages especially in high specific strength and specific stiffness. But,
turning of composites is different from turning conventional metals because of the
inhomogeneity and anisotropic characteristics of composites. It also depends on the diversity
of fiber and matrix properties, fiber orientation, and the relative volume of matrix and fibers.
During a turning operation, vibration and noise are generated as a result of the interaction
between the rotating work piece and moving cutting force. Therefore, there is a need to
understand the dynamic behaviour of composites during machining particularly turning. In
this project, the influence factors contributing to surface finish, vibration and noise during
turning operation have been established. A mathematical model for the dynamic behaviour of
the turning operation is constructed via Rayleigh beam theory and coded into MATLAB tool
for simulation. A parametric study is also performed which involves several operational
conditions and work piece characteristics to discover their effect on vibration of a work piece
(hence the surface finish) through simulation. Results from the numerical simulation
generated are found to be consistent with many experimental findings done by the previous
researcher. |
|---|