High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application
Commercial x-ray targets for computed tomography (CT) applications consist of two major components, a metal disc made of the titanium-zirconium-molybdenum (TZM) alloy, and a surface layer in the bombarding region made of the tungsten-rhenium (W-Re) alloy. The target must endure extremely high temper...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2017
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/726/1/24p%20MOHD%20AZHAR%20HARIMON.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my-uthm-ep.726 |
|---|---|
| record_format |
uketd_dc |
| spelling |
my-uthm-ep.7262021-08-30T07:26:13Z High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application 2017-12 Harimon, Mohd Azhar TA401-492 Materials of engineering and construction. Mechanics of materials Commercial x-ray targets for computed tomography (CT) applications consist of two major components, a metal disc made of the titanium-zirconium-molybdenum (TZM) alloy, and a surface layer in the bombarding region made of the tungsten-rhenium (W-Re) alloy. The target must endure extremely high temperature, associated with high thermal stress, and mechanical stress due to the centrifugal force induced by high speed rotation of the target. Therefore, studies on high temperature fracture and fatigue behavior of these materials would be the most important for reliability assessment and safety design of the x-ray target. However, they have been rarely reported and high temperature fracture and fatigue behavior of these materials has been not always clarified. In the present study, high temperature fracture toughness was evaluated for two kind of TZM alloys, one with higher C content and the other with higher O content. Moreover, effect of forging rate on high temperature fracture toughness was discussed. Fatigue properties at room temperature and 1000 °C were evaluated for three kinds of materials, layered W-Re/TZM, bulk W-Re and bulk TZM, and a fatigue failure definition in the high temperature fatigue test was investigated to evaluate high temperature fatigue strength. The fatigue processes of these x-ray target materials at high temperature were also investigated. High temperature fracture toughness of two TZM alloys with different kinds of grain boundary particles was successfully evaluated using the convenient JIC test method. The result indicated that the JIC values at temperatures ranged from 800 °C to 1000 °C were almost constant regardless of temperature, while the JIC values of the TZM with higher C content were higher than those of the TZM with higher O content. The TZM with different forging rates showed similar JIC values, which suggested the effect of forging rate would be not significant at high temperatures. High temperature fatigue characteristics of W-Re and TZM were successfully evaluated under load-controlled four point bending test at 1000 °C by introducing a fatigue failure criterion as two-times increase of initial compliance, which was corresponding to nucleation and propagation of multiple cracks from specimen surface. The layered W-Re/TZM specimen exhibited the similar fatigue strength to the bulk W-Re specimen. The bulk TZM showed much lower fatigue strength compared to the layered W-Re/TZM and the bulk W-Re. The total crack length measured on the specimen surface at 1000 °C would be a dominant indicator for evaluating progress of fatigue damage. 2017-12 Thesis http://eprints.uthm.edu.my/726/ http://eprints.uthm.edu.my/726/1/24p%20MOHD%20AZHAR%20HARIMON.pdf text en public phd doctoral Nagaoka University of Technology Nagaoka University of Technology |
| institution |
Universiti Tun Hussein Onn Malaysia |
| collection |
UTHM Institutional Repository |
| language |
English |
| topic |
TA401-492 Materials of engineering and construction Mechanics of materials |
| spellingShingle |
TA401-492 Materials of engineering and construction Mechanics of materials Harimon, Mohd Azhar High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| description |
Commercial x-ray targets for computed tomography (CT) applications consist of two major components, a metal disc made of the titanium-zirconium-molybdenum (TZM) alloy, and a surface layer in the bombarding region made of the tungsten-rhenium (W-Re) alloy. The target must endure extremely high temperature, associated with high thermal stress, and mechanical stress due to the centrifugal force induced by high speed rotation of the target. Therefore, studies on high temperature fracture and fatigue behavior of these materials would be the most important for reliability assessment and safety design of the x-ray target. However, they have been rarely reported and high temperature fracture and fatigue behavior of these materials has been not always clarified. In the present study, high temperature fracture toughness was evaluated for two kind of TZM alloys, one with higher C content and the other with higher O content. Moreover, effect of forging rate on high temperature fracture toughness was discussed. Fatigue properties at room temperature and 1000 °C were evaluated for three kinds of materials, layered W-Re/TZM, bulk W-Re and bulk TZM, and a fatigue failure definition in the high temperature fatigue test was investigated to evaluate high temperature fatigue strength. The fatigue processes of these x-ray target materials at high temperature were also investigated. High temperature fracture toughness of two TZM alloys with different kinds of grain boundary particles was successfully evaluated using the convenient JIC test method. The result indicated that the JIC values at temperatures ranged from 800 °C to 1000 °C were almost constant regardless of temperature, while the JIC values of the TZM with higher C content were higher than those of the TZM with higher O content. The TZM
with different forging rates showed similar JIC values, which suggested the effect of
forging rate would be not significant at high temperatures.
High temperature fatigue characteristics of W-Re and TZM were successfully
evaluated under load-controlled four point bending test at 1000 °C by introducing a
fatigue failure criterion as two-times increase of initial compliance, which was
corresponding to nucleation and propagation of multiple cracks from specimen surface.
The layered W-Re/TZM specimen exhibited the similar fatigue strength to the bulk W-Re
specimen. The bulk TZM showed much lower fatigue strength compared to the layered
W-Re/TZM and the bulk W-Re. The total crack length measured on the specimen surface
at 1000 °C would be a dominant indicator for evaluating progress of fatigue damage. |
| format |
Thesis |
| qualification_name |
Doctor of Philosophy (PhD.) |
| qualification_level |
Doctorate |
| author |
Harimon, Mohd Azhar |
| author_facet |
Harimon, Mohd Azhar |
| author_sort |
Harimon, Mohd Azhar |
| title |
High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| title_short |
High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| title_full |
High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| title_fullStr |
High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| title_full_unstemmed |
High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| title_sort |
high temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application |
| granting_institution |
Nagaoka University of Technology |
| granting_department |
Nagaoka University of Technology |
| publishDate |
2017 |
| url |
http://eprints.uthm.edu.my/726/1/24p%20MOHD%20AZHAR%20HARIMON.pdf |
| _version_ |
1747830668338921472 |