Designing of public vehicle driver's seat
The increasing number of accidents involving buses in Malaysia is a cause of concern for the general population that relies on commercial vehicles. Though there are many factors contributing to this, a seat design, which increases the comfort and alertness of the drivers, may help in reducing...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English |
| Published: |
2005
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/7680/1/24p%20MOHD%20SHAHIR%20YAHYA.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| id |
my-uthm-ep.7680 |
|---|---|
| record_format |
uketd_dc |
| spelling |
my-uthm-ep.76802022-09-12T01:00:02Z Designing of public vehicle driver's seat 2005-11 Yahya, Mohd Shahir TL Motor vehicles. Aeronautics. Astronautics TL1-484 Motor vehicles. Cycles The increasing number of accidents involving buses in Malaysia is a cause of concern for the general population that relies on commercial vehicles. Though there are many factors contributing to this, a seat design, which increases the comfort and alertness of the drivers, may help in reducing fatigue. Since commercial vehicles are imported, their fit with the Malaysian population have been not studied. Ergonomic design of driver's workstation is a necessary component not only for the safety of the population but more so for the driver's safety and health protection. A higher percentage of back and cervical pain has been reported among bus drivers than among workers in non-driving position. In designing a seat, there are many considerations that should be taken into account such as seat reference point, seat height, seat width, lumbar support, and the adjustability range of seat. The objective of tins study is to establish the appropriate parameters for designing a bus driver's seat for Malaysian bus drivers by considering their anthropometric dimensions. This study uses qualitative method such as observation and survey to collect the data. The relevant anthropometries data were used to propose the recommended seat design. The recommended and current seat designs were simulated to analyse the performance of the seat in context of the relative comfort experienced by the bus operators and comparisons were made. Simulation on the existing seat showed that it is not able to accommodate the Malaysian bus driver's population, especially in providing adequate support to operator's back (5th percentile male). The simulation was also used to determine the adjustable ranges of the workstation components so as to accommodate 90% of the male bus driver population. 2005-11 Thesis http://eprints.uthm.edu.my/7680/ http://eprints.uthm.edu.my/7680/1/24p%20MOHD%20SHAHIR%20YAHYA.pdf text en public mphil masters Universiti Putra Malaysia Jabatan Kejuruteraan Mekanikal dan Pembuatan |
| institution |
Universiti Tun Hussein Onn Malaysia |
| collection |
UTHM Institutional Repository |
| language |
English |
| topic |
TL Motor vehicles Aeronautics Astronautics TL Motor vehicles Aeronautics Astronautics |
| spellingShingle |
TL Motor vehicles Aeronautics Astronautics TL Motor vehicles Aeronautics Astronautics Yahya, Mohd Shahir Designing of public vehicle driver's seat |
| description |
The increasing number of accidents involving buses in Malaysia is a cause of
concern for the general population that relies on commercial vehicles. Though there
are many factors contributing to this, a seat design, which increases the comfort and
alertness of the drivers, may help in reducing fatigue. Since commercial vehicles are
imported, their fit with the Malaysian population have been not studied. Ergonomic
design of driver's workstation is a necessary component not only for the safety of the
population but more so for the driver's safety and health protection. A higher
percentage of back and cervical pain has been reported among bus drivers than
among workers in non-driving position. In designing a seat, there are many
considerations that should be taken into account such as seat reference point, seat
height, seat width, lumbar support, and the adjustability range of seat. The objective
of tins study is to establish the appropriate parameters for designing a bus driver's
seat for Malaysian bus drivers by considering their anthropometric dimensions. This
study uses qualitative method such as observation and survey to collect the data. The
relevant anthropometries data were used to propose the recommended seat design.
The recommended and current seat designs were simulated to analyse the
performance of the seat in context of the relative comfort experienced by the bus
operators and comparisons were made. Simulation on the existing seat showed that it
is not able to accommodate the Malaysian bus driver's population, especially in
providing adequate support to operator's back (5th percentile male). The simulation
was also used to determine the adjustable ranges of the workstation components so as
to accommodate 90% of the male bus driver population. |
| format |
Thesis |
| qualification_name |
Master of Philosophy (M.Phil.) |
| qualification_level |
Master's degree |
| author |
Yahya, Mohd Shahir |
| author_facet |
Yahya, Mohd Shahir |
| author_sort |
Yahya, Mohd Shahir |
| title |
Designing of public vehicle driver's seat |
| title_short |
Designing of public vehicle driver's seat |
| title_full |
Designing of public vehicle driver's seat |
| title_fullStr |
Designing of public vehicle driver's seat |
| title_full_unstemmed |
Designing of public vehicle driver's seat |
| title_sort |
designing of public vehicle driver's seat |
| granting_institution |
Universiti Putra Malaysia |
| granting_department |
Jabatan Kejuruteraan Mekanikal dan Pembuatan |
| publishDate |
2005 |
| url |
http://eprints.uthm.edu.my/7680/1/24p%20MOHD%20SHAHIR%20YAHYA.pdf |
| _version_ |
1747831179994726400 |