Optimizations and recycling industrial waste (palm oil fly ash) as a pigment in coating technology
In this study, the feasibility of palm oil fly ash (POFA) as a pigment in paint technology is investigated. The utilization of POFA as paint pigment is favorable due to its stability and non-toxicity. On the other hand, producing colour pigment by using POFA as pigment element reduces the solid w...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | أطروحة |
| اللغة: | English English English |
| منشور في: |
2017
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://eprints.uthm.edu.my/868/1/24p%20SYARUL%20HAKIMI%20MOHD%20%40%20MOHD%20NOR.pdf http://eprints.uthm.edu.my/868/2/SYARUL%20HAKIMI%20MOHD%20%40%20MOHD%20NOR%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/868/3/SYARUL%20HAKIMI%20MOHD%20%40%20MOHD%20NOR%20WATERMARK.pdf |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | In this study, the feasibility of palm oil fly ash (POFA) as a pigment in paint
technology is investigated. The utilization of POFA as paint pigment is favorable due
to its stability and non-toxicity. On the other hand, producing colour pigment by
using POFA as pigment element reduces the solid waste in palm oil industry, in
addition to the advantages of inexpensiveness and ready access to POFA feedstock.
The objective of this research are to identify the optimum composition of POFA in
combination of binder, solvent and additives as pigment in paint, to examine the heat
resistant behavior of POFA paint and investigating the POFA paint coating ability to
withstand from the paint testing. In general, this research hopes to improve the
technology of coating and also can be a significant contribution in the academic,
research, development and field studies related to the paint technology. The optimum
preparation and thermal conductivity of paint that prepared from the waste of palm
oil fly ash (POFA) were investigated. For optimum pigment preparations, the
aqueous precursor of 45 % wt POFA mixed with 25 % wt sulphur, 10 % wt graphite
fine powder and 20 % wt calcium hydroxide was sintered at 700 – 800 °C to produce
a complete crystalline product. The sintered product was milled and become grayish
fine powder pigment. From the SEM images, the grain size approximately 0.404 µm.
The pigment was mixed with binder, solvent, and additives and grinded to become a
paint and tested (glossy test, hardness test, adhesion test, and thermal conductivity
test). From the result, the optimum composition of a paint are 22 % wt POFA
pigment, 29 % wt binder, 39 % wt solvent and 10 % wt additives (cobalt 10%, lead
32% and N.C Solution). It also discovers that the paint is good insulator with thermal
conductivity approximately 78.95 W/m.°C. |
|---|